BRNO UNIVERSITY OF TECHNOLOGY INSTITUTE OF AEROSPACE ENGINEERING

1
BRNO UNIVERSITY OF TECHNOLOGY INSTITUTE OF
AEROSPACE ENGINEERING
Possible IAE contribution to the UAV-NET project
Prof. Ing. Antonín Pítek, CSc. Director Institut
e of Aerospace Engineering Faculty of Mechanical
Engineering Brno University of Technology Technick
á 2, 616 69 Brno Tel. [phone]
Cel.420-603-863 151 Fax [phone]
2879 E-mail pistek_at_lu.fme.vutbr.cz www.vutbr.cz
2
BRNO UNIVERSITY OF TECHNOLOGYCZECH REPUBLIC
3
BRNO UNIVERSITY OF TECHNOLOGY

• Established 1899
• The second oldest and biggest
  technical university in the CR
• 13.998 student
• 2.473 employees of which 1.015 academics
• 8 faculties
• Faculty of Civil Engineering
• Faculty of Mechanical Engineering
• Faculty of Electronics and Communication
  Technology
• Faculty of Information Technology
• Faculty of Business and Management
• Faculty of Architecture
• Faculty of Chemistry
• Faculty of Fine Arts

4
IAE MAIN PROFESSIONAL ACTIVITIES

• Pedagogic activities
• 1. Aircraft design
• 2. Aircraft operation
• MSc Bc graduate studies
• PhD doctoral studies
• Continuing education
• 3rd Age university education
• Scientific and research activities
• Flow analyses
• Stress analyses
• Design and computer modeling of aircraft and
  aircraft structures
• Static and dynamic testing of aircraft structures
• Design and testing the structures using the wind
  energy
• Heat transfer and fluid flow analyses
• Operational and economic parameters of aircraft
  and civil aviation
• Civil aviation development prognoses and modeling
• Aerospace management and marketing

5
IAE STRUCTURE
Brno University of Technology Vysoké ucení
technické v Brne
Aeronautical Research Test Institute
Prague Výzkumný a zkuební letecký ústav Praha
Faculty of Mechanical Engineering Fakulta
strojního inenýrství
Czech Technical University of Prague Ceské vysoké
ucení technické Praha
Institute of Aerospace Engineering Letecký ústav
Co-operating Czech organisations
Departments Odbory
Aerospace Research Centre Centrum leteckého
a kosmického výzkumu
Department of Aircraft Design Odbor stavby letadel
Co-operating units at BUT
Department of Aircraft Operation Odbor provozu
letadel
Department of Flight Applications Odbor letových
aplikací
Co-operating foreign universities
Laboratory of Fluid Mechanics Laborator proudení
a prenosu tepla
6
IAE MAIN PROJECTS

• LEONARDO DA VINCI EUROPADS (1998-2001) European
  Professional Aerospace Development Scheme
• TEMPUS IB JEP 14121-99 (1999-2001) Development
  of Civil Aviation Administration Development
  Scheme in the Czech Republic (ECADS)
• Centre for Aircraft Research and Development CARD
  (1998-2000) grant of the CZ Ministry of Industry
  and Trade for the development of VUT 100
  aircraft.
• Experimental Research of the Flying Laboratory
  (1999-2004) grant of the CZ Ministry of
  Education
• Static and Fatigue Tests of the Aircraft for the
  Aircraft Industry (Laboratory is certified by the
  CZ Civil Aviation Authority)
• Centre for Aerospace Research CAR (2000-2004)
  national research centre of the CZ Ministry of
  Education in aerospace.

7
Aeronautical Products of Czech aircraft industry

• Military jet light combat aircraft L-39 L-59 L139
  L 159

8
Aeronautical Products of Czech aircraft industry

• Commuter turboprop aircraft L-410 UVP-E
  L-420 17 seater
• L-610
  40 seater

9
Aeronautical Products of Czech aircraft industry

• Ae 270 Multi-mission propjet aircraft

10
Aeronautical Products of Czech aircraft industry

• Sport, aerobatic and training aeroplanes (piston
  engine) Z-50 Z-142 Z-242 Z-143

11
Aeronautical Products of Czech aircraft industry

• Gliders L-13 L-23 L-33

12
Aeronautical Products of Czech aircraft industry

• Very-light (JAR-VLA) and light sport and
  multi-purpose aircraft KP-2U EV 97

13
Aeronautical Products of Czech aircraft industry

• Aircraft turboprop piston engines aircraft
  proppellers
• M-601 M-602 M-701 M 132 M337
• Aircraft avionics
• Aircraft systems and components
• Aircraft hydraulic systems
• Full mission aircraft simulators

14
STRESS ANALYSIS and TESTING OF LANDING GEAR
15
DEVELOPMENT OF A NEW GENERATION OF AIRCRAFT FOR
PILOT TRAINING
VUT 100
Z 90
16
DEVELOPMENT OF A NEW GENERATION OF AIRCRAFT FOR
PILOT TRAINING
HEREDITY OF INDIVIDUAL MODELS OF VUT 100 FAMILY
Inheritable construction components which can be
used in all models of family aircraft

construction components for the single engine
aircraft models
Inheritable construction components which can be
used in all models of family aircraft
construction components for the twin engine
aircraft models
17
Sofware applications for designe and certification
USING THE MSC- DYTRAN FOR CRASH ANALYSE OF
THE GLIDER
18
Sofware applications for designe and certification
APPLICATON OF MSC-FATIGUE ANALYSIS WITH CRACK
EVOLUTION ON SPAR WEB BY DAMAGE TOLERACE
METHODOLOGY
EXPERIMENT
FEM ANALYSIS
19
Sofware applications for designe and certification
FULL SCALE MODEL FOR Ae 270 AEROELASTICITY
PROBLEM USING THE MSC-AEROELASTICITY MODUL
20
TESTING OF AEROPLANES AND ITS PARTS
TEST LABORATORY approved by Czech CAA-member of
JAA
21
ENERGY STORING PROSTHETIC FOOT
Composite ankle joint
Composite foot keel
22
AUTOCLAVE TECHNOLOGY
Functional prototypes production
Laboratory autoclave parameters
Max. temperature 180 oC Maximum pressure 1
MPa Diameter 0,8 m, length 1,5 m
Composite ankle joint Composite foot keel
23
CFD SOFTWARE APLICATION
24
CFD SOFTWARE APLICATION
VUT 100 Project - stream visualization around the
flaps
25
Possible IAE contribution to the UAV-NET project

• UAV stress/strain analyses including crash
  analyses
• UAV computational fluid dynamics
• Static and fatigue testing of UAV structures
  samples
• Manufacture and testing composite samples
• Co-operation with the Czech Aviation Authority
  and Aircraft Industry