Training Objective - PowerPoint PPT Presentation

1 / 26
About This Presentation
Title:

Training Objective

Description:

Change of Fabrication Site, Country Of Origin, New Subcontractor, etc. ... All changes to fabrication site, qualification levels, country of origin, or ... – PowerPoint PPT presentation

Number of Views:57
Avg rating:3.0/5.0
Slides: 27
Provided by: flextr
Category:

less

Transcript and Presenter's Notes

Title: Training Objective


1
(No Transcript)
2
Training Objective
  • Product Change Notification (PCN) Training for
    Manufacturers is intended for all Flextronics
    Manufacturers.
  • The Training Is Designed To
  • Inform Manufacturers About Flextronics Product
    Change Policy And Disclaimer
  • Identify Manufacturer Responsibilities Regarding
    Product Change Notification Management
  • Define Reportable And Non Reportable Change
    Requirements (Interchangeable And Non
    Interchangeable Changes)
  • Document Key Information Required For Generating
    PCNs
  • Coach Manufacturers On When And How To Notify
    Flextronics Of Changes
  • (Temporary Or Permanent) Being Made To Their
    Products And/Or Processes
  • Provide Reference Information On Change Types And
    Descriptions

3
Training Roadmap
  • I. Product Change Policy, Disclaimer, and
    Manufacturer Responsibility
  • Flextronics Product Change Policy and Disclaimer
  • Manufacturer Responsibility
  • II. Product Change Notification (PCN) and Change
    Definitions
  • Defining Change - Interchangeable and Non
    Interchangeable Changes
  • PCN Document
  • III. Documenting and Communicating PCNs
  • Documenting PCNs - Mandatory Information
  • End of Life (EOL) PCNs
  • Communicating PCNs
  • IV. References
  • Reference to Change Types and Descriptions
  • Acronyms

4
  • Product Change Notification Process
  • Flextronics Policy, Disclaimer, and Manufacturer
    Responsibility

5
Flextronics Product Change Notification Policy
and Disclaimer
6
Manufacturer Responsibility
7
II. Defining Change and PCN Document
8
Defining Change
9
Defining Change
10
PCN Documents
  • The PCN Document
  • Is Created By Manufacturer As Part Of The
    Flextronics Change Management Process
  • Informs Flextronics Of An Impending Change To A
    Part Or Product Provided by that Manufacturer
  • Shall Be Transmitted Via Email
  • Is Sent Within Required PCN Lead Time
  • Shall Be Communicated In English
  • Shall Be Accessible In Terms Of Document
    Protection And Allow Copying
  • Must Be Complete And Accurate.
  • The Manufacturer
  • Shall Submit At Least One PCN Document Per PCN
  • Shall Submit Attached Documents In MS Excel, MS
    Word, Or Adobe (PDF) Format.

11
III. Documenting and Communicating PCNs
12
Documenting PCNs Mandatory Information
13
Example of a PCN Document
14
EOL PCNs
15
Example of an EOL PCN
SS090
POU781T
POU781T
mnb_at_vcx.com
16
Communicating PCNs
17
PCN Process Flow
18
Summary
  • Manufacturers are responsible for submitting all
    change notifications to Flextronics via email
    using the email address pcn_at_flextronics.com.
  • Manufacturers are responsible for implementing
    and maintaining an appropriate change management
    system that allows them to meet Flextronics
    change reporting requirements.
  • Manufacturers are responsible for reporting all
    non-interchangeable changes and interchangeable
    changes based on this training and their
    contractual requirements
  • Manufacturers should include all mandatory
    information in their PCN and EOL documents.
  • Manufacturers report normal changes 90 days
    prior to implementation and EOL changes 180 days
    prior to final shipment.
  • Manufacturers should report changes via email
    and in preferred formats as detailed in the
    training.

19
IV References and Acronyms
20
Reference Change Types and Descriptions
21
Reference Change Types and Descriptions
22
Reference Change Types and Descriptions
23
Reference Change Types and Descriptions
24
List of Acronyms
25
Acronyms
26
For Further Questions Please Contact PCN
Team pcn_at_flextronics.com
The information in this presentation is the
intellectual property of Flextronics. Any changes
or omissions from its original format outside
Flextronics are considered void and not
representative of this organization. Any
forwarding to third parties or publication even
of parts thereof requires express and written
approval by Flextronics. Hardcopy printouts of
this file should be treated as reference only.
It is the users responsibility to validate that
the hardcopy represents the most current revision
by consulting the online reference or the
relevant documentation center.
Write a Comment
User Comments (0)
About PowerShow.com