642-883 Dumps Questions

About This Presentation
Title:

642-883 Dumps Questions

Description:

Choose a sure shot way towards your success in Deploying Cisco Service Provider Network Routing (SPROUTE) CCNP Service Provider certification exam with Cisco 642-883 dumps of (Dumpspdf.com). We guarantee your Deploying Cisco Service Provider Network Routing (SPROUTE) success with 100% money back assurance. An exclusive collection of valid and most updated 642-883 Questions Answers is the secret behind this assurance. So feel free to get benefits from such valuable 642-883 Exam Dumps and enjoy brilliant success in Cisco CCNP Service Provider exam. Get huge discount. Visit us for more information on – PowerPoint PPT presentation

Number of Views:4

less

Transcript and Presenter's Notes

Title: 642-883 Dumps Questions


1
Cisco 642-883 Deploying Cisco Service Provider
Network Routing (SPROUTE)
2
Validate your 642-883 Exam learning and
preparation with our most updated 642-883 dumps.
(Dumpspdf.com) has experienced IT experts who
gather and approve a huge range of Cisco 642-883
Questions Answers for CCNP Service Provider
Certification seekers. Practicing our 100
updated 642-883 Practice Tests is a guaranteed
way towards your success in Cisco 642-883 Exam.
642-883 PDF Dumps
642-883 Exam Dumps
3
You dont need to take any stress about your
642-883 Dumps Questions. We will provide you some
demo questions and answers of 642-883 Exam Dumps
here.
642-883 PDF Dumps
642-883 Exam Dumps
4
Question NO 1, Refer to the exhibit. Which Cisco
IOS XE command should be added to this
configuration for the BFD protocol to operate
successfully? A. Router1(config-if)bfd
echoRouter2(config-if)bfd echo B.
Router1(config-ospf-ar-if)bfd fast-detectRouter2
(config-ospf-ar-if)bfd fast-detect C.
Router1(config-router)bfd all-interfacesRouter2 (
config-router)bfd all-interfaces D.
Router1(config- bfd)echo-enableRouter2 (config-
bfd)echo-enable Answer C
https//www.dumpspdf.com/642-883.html
5
Question NO 2, Refer to the exhibit. The
route-map shown in the exhibit is applied to
updates received from a BGP neighbor. Which two
statements are correct regarding the Cisco IOS
route map configuration? (Choose two.) A. The
local preference will be set to 200 AND the
metric will be set to 1000 IF the route matches
the PL1 OR PL2 prefix list AND the route also
matches the AS path 1 access list. B. The three
match conditions are logical AND match prefix
list PL1 AND PL2 AND match the AS path 1 access
list.In AS C. The match prefix-list condition isa
logical OR match prefix list PL1 OR PL2. D. All
routes that are not matched by the sequence 10
route map statement will be dropped. E. All match
conditions are logical OR match prefix list PL1
OR PL2 OR match the AS path 1 access
list. Answer A,B
https//www.dumpspdf.com/642-883.html
6
Question NO 3, Which option describes the
configuration for a Cisco IOS XR OSPF router to
give it the highest chances of becoming DR? A.
ip ospf priority 0 under the OSPF interface
statement B. ip ospf priority 0 under the OSPF
area statement C. ip ospf priority 255 under the
OSPF interface statement D. ip ospf priority 255
under the OSPF area statement E. Leave priority
unchanged, but assign a high-numbered IP address
on a loopback interface. F. Leave priority
unchanged, but assign a high-numbered IP address
on any physical interface. Answer C
https//www.dumpspdf.com/642-883.html
7
Question NO 4, Which two of the following are
true regarding the BGP Prefix-Based outbound
route filtering feature? (Choose two.) A. IP
multicast routes are not supported. B. Outbound
route filtering is configured only on a
per-address family basis. C. Outbound route
filtering can be configured for either iBGP or
eBGP sessions. D. The outbound route filter can
be defined in a Prefix list, Distribute list or
Access lists. E. Outbound route filtering is more
effective when a distance vector IGP is
used. Answer A,B
https//www.dumpspdf.com/642-883.html
8
Question NO 5, When configuring BGP on Cisco IOS
XR Software, which address-family is enabled by
default? A. IPv4 unicast B. IPv6 unicast C.
VPNv4 D. IPv4 unicast and IPv6 unicast E. IPv4
unicast and IPv6 unicast and VPNv4 F. No
address-family is enabled by default. Answer F
https//www.dumpspdf.com/642-883.html
9
Question NO 6, Refer to the exhibit. Which
configuration is correct for XR4 for an e-BGP
session with R1? A. router bgp 100 neighbor
10.10.14.1 remote-as 100
https//www.dumpspdf.com/642-883.html
10
B. router bgp 100 neighbor 10.10.14.1 remote-as
10 address-family ipv4 unicast C. router bgp
100 address-family ipv4 unicast neighbor
10.10.14.1 remote-as 100 address-family ipv4
unicast D. router bgp 100 address-family ipv4
unicast neighbor 10.10.14.1 remote-as
100 Answer C
https//www.dumpspdf.com/642-883.html
11
Question NO 7, An EIGRP domain is redistributed
into an OSPF NSSA area. On which router would
this redistribution occur? A. stub border
router B. summary router C. autonomous system
boundary router D. backbone router Answer C
https//www.dumpspdf.com/642-883.html
12
Question NO 8, Which statement best describes the
function of a BGP af-group? A. Use templates in
different neighbors so it makes the BGP
implementation easier. B. Group different address
family neighbors inside BGP. C. Create a group of
neighbors that can inherit address family
configuration inside BGP. D. Substitute the class
maps inside BGP on Cisco IOS XR devices. Answer
B
https//www.dumpspdf.com/642-883.html
13
Question NO 9, Refer to the Cisco IOS show
command output shown in the exhibit.
https//www.dumpspdf.com/642-883.html
14
  • Which of the following statements is correct?
  • The best path to 10.2.10.1/32 was chosen because
    of the AS path.
  • B. The best path to 10.2.10.1/32 was chosen
    because of the weight.
  • C. The best path to 10.2.10.1/32 was chosen
    because of the local preference.
  • D. The best path to 10.2.10.1/32 was chosen
    because of the MED.
  • E. The best path to 10.2.10.1/32 was chosen
    because of the route origin.
  • Answer B

https//www.dumpspdf.com/642-883.html
15
Question NO 10, Refer to the exhibit. IS-I
S adjacency is not established between XR2 and
R1. Which action fixes this issue? A. unify IS-IS
process IDs on each router B. configure on R1
under IS-IS is-type level-1-2 C. configure on R1
under IS-IS area-password CISCO D. configure on
XR2 under IS-IS under Gi0/0/0/0 address-family
ipv4 unicast Answer D
https//www.dumpspdf.com/642-883.html
16
Why Choose US?
642-883 PDF Dumps
642-883 Exam Dumps
17
642-883 PDF Dumps
642-883 Exam Dumps
18
Thanks For Watching
Dumpspdf provides you guaranteed success in
642-883 Real Exam Dumps as we have latest 642-883
braindumps. Click Here following link to download
642-883 Dumps PDF.
Good luck
642-883 PDF Dumps
642-883 Exam Dumps
Write a Comment
User Comments (0)