Simple Facts About Compression Tester and Tearing Resistance Tester

About This Presentation
Title:

Simple Facts About Compression Tester and Tearing Resistance Tester

Description:

Buy here automatic instrument short span compression machines. UEC provides the compressive index of a material the failure load per width/basis weight increase with sheet density in much the same way as the tensile index. We offer you this service in your budget. – PowerPoint PPT presentation

Number of Views:13

less

Transcript and Presenter's Notes

Title: Simple Facts About Compression Tester and Tearing Resistance Tester


1
Simple Facts About Compression Tester and Tearing
Resistance Tester
2
A compression test is any test in which material
experiences opposing forces that push inward upon
the specimen from opposite sides or is otherwise
compressed, squashed, crushed, or flattened. The
Short Span Compression Tester is an advanced
microprocessor-controlled instrument that
determines the compression strength of fluting
medium or test liner and offers unrivaled
repeatability and reproducibility.
3
Considerable cost savings are possible through
accurate prediction of corrugated component
performance. Some of the features of short span
compression tester are their unique clamping
mechanism, providing test statistics at the push
of a button, providing selectable units such as
kN/m, lb/inch, N, loading cell with overload
protection, easy to read display, traceable
calibration etc.
4
The main purpose of doing a compression test is
to determine the behavior or response of a
material while it experiences a compressive load
by measuring fundamental variables, such as
strain, stress, and deformation.
5
The compressive strength of a material is tested
to determine, yield strength, ultimate strength,
elastic limit, and the elastic modulus among
various other parameters. Short Span Compression
Tester measures the compression strength of paper
and board. It incorporates a precision mechanical
design to reduce frictional errors that provides
unmatched accuracy and repeatability. Tearing
Resistance Tester
6
Tearing Resistance Tester is generally used in
plastic firms, paper, and textile industries. A
tearing resistance tester is used for measuring
the paper, Board, Plastic films and other similar
materials. The process is done by making an
initial cut and the test piece is then torn
through a given distance. The work done in the
test piece is measured as the loss of potential
energy of a pendulum which is free to swing on
its horizontal axis. A calibrated scale
indicates the mean tearing force. These test
results are then transferred directly to the
computer so as to retrieve these test results
later or to make a test profile. Contact Us 91
(132) 264-2527, 264-8427, 264-4494 E-Mail I'D
info_at_uecin.com, export_at_uecin.com
Write a Comment
User Comments (0)