Best Online “Insulation Resistance Tester” Supplier In India

1
(No Transcript)
2
In a perfect world, all the electrical current
sent along a conductive wire would reach its
intended destination. However, in the real world
some of it is lost along the way for various
reasons. Wires are insulated with a resistant
sheathing to contain the conductivity of the
typically copper or aluminum core, but even with
this insulation resistance tester in place, some
of the current still manages to escape.
3
Much like a leak in a water pipe, an imperfection
in the insulation resistance tester of a wire
allows a steady flow of electricity to escape,
which can be detrimental to electrical circuits
and machinery. However, testing can help you
determine whether the insulation resistance
tester is performing at an effective and safe
level. Routine testing can identify problems
before they result in injury or equipment
failure.
4
Insulation resistance tester is subject to many
elements that can cause it to perform at a
less-than-acceptable level. Excessive heat or
cold, moisture, vibration, dirt, oil, and
corrosive vapors can all contribute to
deterioration. For this reason, routine
insulation resistance tester testing is
necessary.
5
Insulation resistance tester starts to age as
soon as it's made. As its ages, its insulating
performance deteriorates. Any harsh installation
environments, especially those with temperature
extremes and/or chemical contamination,
accelerates this process. This deterioration can
result in dangerous conditions in power
reliability and personnel safety. As such, it's
important to identify this deterioration quickly
so that corrective steps can be taken. One of the
simplest tests and its required test instrument
are not universally understood.
6
Find more information https//www.advancetech.co
.in/products/sanwa-japan/digital-insulation-resist
ance-tester/mg1000