Title: Planet Earth
1Planet Earth
2Earths Interior and Plate Tectonics
3Earths Interior
- Earth is made up of three primary layers each
with its own unique composition and properties. - The Crust - the solid, outermost and thinnest
layer. It makes up only 1 of Earths volume.
There are two types of crust. - Continental crust thicker, exposed crust
- Deepest under mountains
- Oceanic crust thinner and more dense than
continental crust
4Earths Interior
- The Mantle - the thickest layer (80 of the
volume of the planet). It goes from solid to
partially molten material called magma with
depth. - The Lithosphere (lithos solid) is made up of
the crust and solid part of the upper mantle. - The Asthenosphere (asthenos liquid) is a
layer of partially melted, molten, rock that
makes up the rest of the upper mantle just below
the Lithosphere - The lower mantle is mostly hot, liquid magma that
extend down to the next layer - It is the convection currents that occur in the
Mantle that drive plate tectonics and continental
drift.
5Earths Interior
- The Core is at the center of the Earth and has
two layers. - The outer core is very hot, liquid metals mostly
Iron (Fe) and Nickel (Ni) - The inner core is also made of extremely hot
metals but because of the tremendous pressure, it
remains solid. - it spins within the liquid, metal outer core and
generates Earths magnetic field that protects
our planet from dangerous radiation from space.
6 7Plate Tectonics
- Plate Tectonics and Continental Drift Theories
First started in the early 1900s by German
scientist Alfred Wegener. - He proposed that all of the continents originated
from one large supercontinent (Pangaea) and that
they drifted to their present locations over a
long time. - He based his theory on the following
observations - Continental margins (edges)
- Similar in shape and size
- Fit together like puzzle pieces
8Plate Tectonics
- Rock types
- Rocks of Similar formation and age found on
opposite continents -
9Plate Tectonics
- Fossils of the same animals and plants found in
these rock layers, on different continents.
(Mesosaurus)
10Breakup of Pangaea
11Exit Slip
- What are the three primary layers of earth?
Describe each in detail. - Where do convection currents occur?
- What is the difference between the theory of
plate tectonics and continental drift?
12Do Now
- What evidence was used to support the theory of
plate tectonics? Describe in detail. - Why wasnt Wegeners theory of continental drift
widely accepted compared to the theory of plate
tectonics?
13Plate Tectonics
- More discoveries in the twentieth century tell us
that Earths solid outer layer or crust
(lithosphere) is broken into several large pieces
called tectonic plates. - Tectonic plates ride on top of the softer,
putty-like upper mantle (asthenosphere). - they are moved by upwelling due to convection
currents in this soft, hot magma.
14Plate Tectonics
- Tectonic plate boundaries occur at the margins
(edges) of all these plates. There are three
basic types of plate boundaries that form between
two types of crust, continental and oceanic. -
15Plate Tectonics
- Divergent boundaries form where plates are
pulling apart, away from each other - Ocean to ocean Sea floor spreading, Mid-Atlantic
ridge - Continent to continent African Rift Valley
16Plate Tectonics
- Convergent boundaries form where plates are
crashing together - Ocean to continent ocean crust subducts below
the continental crust - EX. West Coast of South America Andes Mtns.
- Ocean to ocean ocean crust subducts below
another ocean crust. - EX. Aleutian Islands/Indonesia/Japan
- Continent to continent 2 continental crusts
collide. - EX. The Himalayas/Rockies/Alps
17Oceanic to Continental Convergence
18Oceanic to Oceanic Convergence
19Continental to Continental Convergence
20Plate Tectonics
- Transform fault boundaries form where plates
grind past each other - Ocean to ocean Lateral faults along the
Mid-Atlantic Ridge - Continent to continent The San Andreas Fault
(our backyard) - The entire landscape of our planet has been
shaped by a combination of all these processes
21Transform Fault Boundary
22Exit Slip
- Compare and contrast transform plate boundaries,
convergent plate boundaries, and divergent plate
boundaries. - What boundaries occur where oceanic and
continental crust collide? - What boundaries occur where oceanic and oceanic
crust collide? - What boundaries occur where continental crust
collides with continental crust
23Do Now
- What type of plate boundary would I expect an
island to form at? What are the two types of
crust involved? - What type of plate boundary would I expect a
mountain to form at? What are the two types of
crust involved? - What type of plate boundary would I expect a
trench to form at? What are the two types of
crust involved?
24Earthquakes and Volcanoes
25Earthquakes
- Earthquake a sudden trembling of the Earth
caused by a release of accumulated energy in the
Lithosphere. - Most occur at tectonic plate boundaries
- The point of rupture where the earthquake starts
underground is the focus. - The place on the surface directly above the focus
is the epicenter.
26Earthquakes
27Earthquakes
28Earthquakes
- Seismic Waves 3 types
- P-waves (Primary waves)
- Compressional/Longitudinal waves that travel
through Earths interior very fast - they bend as they pass through the liquid outer
core. - S-waves (Secondary waves)
- Transverse waves that travel through Earths
interior slightly slower that P-waves, and DO NOT
travel through liquid
29Earthquakes
30Earthquakes
- Surface Waves
- Slowest of the seismic waves and travel only at
the surface. The most destructive of the three
waves -
31Earthquakes
32Earthquakes
- Seismic waves are recorded on a seismograph.
33(No Transcript)
34Earthquakes
- The amplitude of seismic waves is measured by the
Richter Scale. -
35Earthquakes
- Damage or Intensity from an earthquake is
measured in the Mercalli Scale.
36Earthquakes
Will The Big One Happen Here?
37(No Transcript)
38Exit Slip
- Describe the three types of waves involved in an
earthquake? Describe the motion and damage of
each. - What is the difference between a focus and the
epicenter? - What are earthquakes measured on?
39Do Now
- Describe the three types of waves involved in an
earthquake? Describe the motion and damage of
each. - What is the difference between a focus and the
epicenter? - What are earthquakes measured on?
- What is the difference between the Richter scale
and the Mercalli scale? - Why are both scales necessary to use?
- Is a seismograph the same as the Richter scale?
Why or Why not?
40Volcanoes
- Volcanoes mountains formed through repeated
eruptions of lava and pyroclastics. -
- There are 4 main types of volcanoes.
- Shield Volcanoes
- Very large and spread out
- Gentle Slopes and Gentle Eruptions
- made from layers of lava
- Example Hawaii
41Volcanoes
The Big Island of Hawaii
42Volcanoes
- Composite or Strato Volcanoes
- Very large and tall
- Steep Slopes and Violent Eruptions because the
lava is thick, viscous and gaseous - made of alternating layers of lava and
pyroclastics (cinders) - Examples Mt. St. Helens, Mt. Shasta, Mt. Fuji,
Mt. Vesuvius
43Mt. Shasta
44Mt. St. Helens before and after
45(No Transcript)
46Volcanoes
- Cinder Cones
- small not very tall
- moderate slopes and mild eruptions
- made of pyroclastics (cinders and ash)
- Examples Pisgah Crater, Paricutín Mexico
47Cinder Cone
48Size Comparison
- Magma molten rocks from the mantlecrust
- Lava magma that has reached the surface
49Volcanoes
Calderas
a. Calderas - large depressions in volcanoes.
b. Nearly circular
c. Formed when volcano collapses inward
after a catastrophic explosion
d. Size exceeds one mile in diameter e. Examples
Crater Lake , Yellowstone, Long Valley
50Exit Slip
- What are the three different types volcanoes?
- Describe each type of volcano
- Provide one example of each type of volcano and
describe why that example fits the type.
51Do Now
- What is a caldera? Provide one example
- What is a cinder cone volcano? What is one
example? - What is a shield volcano? Provide one example.
- List each type of volcano from least explosive to
most explosive
52Minerals and Rocks
53Minerals
- Minerals - the materials that make up rocks. A.
There are about 3500 different minerals found in
the Earths crust and only 20 of these make up
95 of all rocks. -
54Minerals
- All minerals share the following
characteristics - Naturally occurring, inorganic materials
- Definite chemical composition (chemical formula).
- Solids with a specific crystalline structure
- .
55Minerals
- There are nine common rock-forming
minerals/mineral groups. Nearly all of these are
silicates, meaning they consist of metal atoms
combined with silicon and oxygen
56Minerals
- Nine most common rock-forming minerals or mineral
groups - Quartz (Silica) silicon dioxide, SiO2
- Feldspars sodium or calcium aluminum silicates,
NaAlSiO8 or CaAlSiO8 - Amphiboles Complex hydrous silicates, (OH)
containing calcium, magnesium, and iron - Pyroxenes Closely related to the Amphiboles
57Minerals
- Micas Sheets of soft silicates with potassium
(K), calcium (Ca 2 ), or sodium (Na) ions
between the layers - Chlorites magnesium, iron-aluminum silicates
Mg6(AlSi3)O10 or Fe6(AlSi3)O10 - Calcite Most common of the carbonate
minerals, CaCO3 - Dolomite Both a rock and mineral, MgCa(CO3)2
- Olivine A magnesium or iron silicate colored
various shades of green, Mg2SiO4, Fe2SiO4
58Rocks
- A Rocks characteristics and appearance reflect
its mineral composition and the way it was
formed. - Rock can form in three different ways.
- Igneous rocks (formed by fire) formed when
liquid magma solidifies. - Two types
- Extrusive (Volcanic) forms when magma erupts
(lava) and solidifies quickly at the surface.
59Rocks
- EXAMPLES basalt, tuff, obsidian,
pumice, - rhyolite, andesite
60Rocks
- Intrusive (Plutonic) form when large bubbles
of magma are trapped beneath the surface of the
Earth (pluton) cools and solidifies slowly under
pressure forming crystals. - EXAMPLES granite, gabbro, diorite.
61Rocks
- Half Dome a pluton above ground
62Rocks
- Sedimentary rocks Form when sediments, or small
pieces of weathered rock (clay, mud, sand,
gravel, etc.) are deposited, compressed, and
cemented together to form solid rock. - The remains of living organisms can also be
deposited along with these sediments forming
fossils within the layers of these rocks. - The type of sedimentary rock created depends on
the sediments that formed it, and is named
according to fragment size. - EXAMPLES mudstone, sandstone, limestone, coal,
conglomerate
63Sedimentary Rocks
64Rocks
- Metamorphic rock (to change in form) Forms when
older igneous, sedimentary, or other metamorphic
rocks are changed due to extreme heat and/or
pressure. - Heat and pressure occurs in subduction zones
- Heat occurs in volcanic vents contact
metamorphism
Pressure occurs at convergent plate boundaries
forms fold mountains
65Rocks
- The Rock Cycle the model that shows the origin
of the 3 rock types and their interrelatedness to
each other - The absolute age of a rock is determined by
radioactive isotopes - The Principle of Superposition is used to date
rocks relatively -
66Exit Slip
- What are the different types of rocks?
- Describe each rock type in detail.
- What is the difference between igneous intrusive
and igneous extrusive rock? - What characteristic do all minerals share?
- How many different types of minerals exist?
- How many minerals make up most of Earths rocks?
- list the nine most common rock forming mineral
groups.
67Do Now
- Describe the rock cycle in detail
68Weathering, Erosion, and Deposition
69Weathering, Erosion, and Deposition
- VI. Weathering - a change in the physical form or
chemical composition of rock materials exposed at
the Earths surface. - A. Physical weathering - breaks rocks down into
- smaller and smaller pieces and does not
change the chemical composition. This occurs by
the - following processes.
- 1. Water erosion
- 2. Frost wedging
- 3. Wind abrasion
- 4. Organic activities
- 5. Other physical forces
70Weathering, Erosion, and Deposition
- Chemical weathering - when minerals in rocks
react chemically to break down and change their
chemical form. - Some minerals dissolve easily in water. Rain
water is slightly acidic (pH 5.7) due to a
natural reaction between water vapor H2O, and
Carbon Dioxide CO2 , in the atmosphere. This
forms a weak acid solution H2CO3 .
71Weathering, Erosion, and Deposition
- EXAMPLE The formation of Limestone caverns or
sink holes. (See figure 17-29, pg.584). - Acid rain - a severe form of this process caused
by man-made pollutants. - Polluting gasses emitted during the burning of
fossil fuels (gasoline, coal, oil,) mix with
water vapor in the atmosphere to form acid rain. - These acids have a stronger pH than normal rain
water and do a lot of damage to man-made and
natural stone structures. (See figure 17-30, pg.
585).
72Weathering, Erosion, and Deposition
- Erosion - the removal of weathered rock materials
(sediments) and minerals by one or more of the
following processes - Moving water (most effective)
- Rivers or streams
- Ocean currents, waves or tides
- Winds
- Sand or dust storms
- Ice
- Glaciers massive, long lasting accumulations of
compacted snow and ice that moves down slope
slowly - Frost Wedging
- Gravity
- Land, rock, or mud slides
73Weathering, Erosion, and Deposition
- Deposition - when the force in these moving
processes slows or stops and the sediments are
deposited (laid down) forming many different
land forms - Deltas and flats
- Beaches and sand bars
- Sand dunes and hills
- Moraines
- Alluvial fans, rock piles and valleys
74Exit Slip
- What is the difference between erosion,
deposition, and weathering. - Provide one example for each of the above.