Equipment Orientation

1
Equipment Orientation

• Cisco Net Academy
• Mike Fuszner

2
Desktops Resolution

• Students are not to alter desktops in any way
• Do not add icons
• Do not change background
• Do not change screen resolution
• Do not install additional software

3
College Websites

• www.stchas.edu/networking
• for general information about the Networking
  programs
• www.stchas.edu/curriculum
• /cisco (usernamecisco, passwordosi)

Password for Cisco Lab Workstations is osi.
4
(No Transcript)
5
(No Transcript)
6
Care of Equipment

• Students must use care while using the equipment
• Caution against breaking connectors, pins on
  cables, and so forth

7
Cabling and IP Addresses

• Students must cable their own lab topologies
• All cables should be returned to the cable rack
  at the end of class
• Students may use any IP addressing scheme within
  the lab topology as long they do not connect to
  the college backbone
• Since the labs will be isolated students in each
  group may use the same IP addresses

8
Equipment Rack Layout

• APC Unit
• Access Server
• Patch Panel
• Upper and Bottom pods
• Routers Switches
• Adtran Atlas 550
• Catalyst 4006

9
APC Power Control Unit
Instructor will power the racks on and off as
required.
10
(No Transcript)
11
Serial Cables
12
Console Cables

• A console cable is a rollover cable
• To configure a router or switch out-of-band,
  connect a console cable from the console port to
  an adapter attached to the COM port on a PC
• Use Hyper Terminal, TeraTerm, or some other
  terminal emulation software

13
Using the Access Server

• Students are limited to User Mode
• Commonly used commands are
• Show sessions
• Disconnect ?
• CtrlShift6, x to back out of each telnet
  session
• Show line
• Clear line ?

14
Initial Router Configuration

• Walk thru an using the handout
• Begin by using
• Erase Start
• Reload
• Additional commands
• IP subnet-zero to enable IP addresses from subnet
  0
• IP http server allows access to router using a
  browser
• No ip domain-lookup prevents router from querying
  a DNS server when you input the wrong characters
• Under line con 0, using logging synchronous to
  return to a fresh line when input is interrupted
  by a message.

Initial Router Configuration
15
(No Transcript)