Title: Survey methodology and procedures: General advice from Frascati Manual
1Survey methodology and procedures General advice
from Frascati Manual
National Workshop on Science, Technology and
Innovation (STI) Statistics Abu Dhabi, UAE 14
October 2012
2Sources of this presentation
- Chapter 7 of the Frascati Manual - RD Survey
Methodology - Section 8 of the Annex to the Frascati Manual
(Measuring RD in developing countries) -
Strengthening RD Statistical Systems - Chapter 7 of UIS Technical Paper no. 5 (Measuring
RD in developing countries) - Strengthening RD
Statistical Systems
3Institutionalization of STI statistics
- Political support
- Infrastructure and sustained staff
training/capacity building - Involvement of NSOs Official statistics status
for RD surveys. - Adequate legal framework
4User-producer networks
- Recommendations
- User-producer networks and other forms of
stakeholder consultation should be instituted. - Establishing national ST statistics groups.
- Involve multiple actors.
- Coordinating/networking among institutions/databas
es. - Partnering with business associations.
- Conducting face-to-face visits by statisticians
and project leaders. - Exploit pre-existing personnel ties.
- Get NSO involved to deal with privacy of
information. - Training of interviewers/primary data producers.
5General issues
- Statistics on RD require regular, systematic and
harmonised special surveys - Other sources provide information, but
- concepts of RD used often different from FM
concepts - concepts may change over time
- very difficult to obtain all data for the same
period - difficult to avoid double counting when tracking
flows from financial statements and other sources
- Estimates are a necessary supplement to surveys
- especially in higher education sector
6Scope of RD surveys
- RD surveys should identify and measure all
financial and personnel resources devoted to all
RD activities in all RD units - RD surveys are mainly addressed to
RD-performing units - Chapter 7 of the FM only addresses
performer-based surveys - Statistical methodologies and other procedures
have to be established to capture all RD,
especially for units in the business enterprise
sector with little RD
7Identifying target population and survey
respondents General issues
- Exhaustive survey not possible in most countries
- Constraints include
- number of respondents may have to be restricted
to keep costs down - RD survey may have to be taken in conjunction
with another survey - surveys of some groups may require the
participation of other agencies with different
data needs and hence different questions for
respondents - One size does not fit all every country has
different constraints advice is therefore of
general nature
8Establishing registers
- RD in developing countries tends to be very much
the purview of public bodies - Recommendations
- Establishing a database of public sector RD
projects - include human and financial resources align with
national policies. - design could reflect the RD statistical
reporting/definitions. - source for evaluation of such projects.
- Establishing Science and Technology Management
Information System (STMIS) - provide overview of research system.
- framework for establishing complete registers as
sample frames for RD surveys.
9Science and Technology Management Information
System (STMIS) and other secondary sources
- STMIS (e.g. database of scientists, research
grants, CV databases, etc) frequent source for
the production of RD statistics. - Recommendations
- need close integration between the statistical
system and the STMIS. - need adjustments to produce comparable
statistics, taking into account issues of
definitions and coverage. - need a balanced approach using both STMIS and
surveys. - need different approach to Private sector
organizations as they are frequently not covered
by these systems.
10Establishing registers
- Other sources
- Associations (trade, academic).
- Learned societies.
- Registers or databases of scientists and
engineers. - Database of research grants.
- Databases of scientific publications.
- Patents and other IP documents.
- Business registers.
11Survey procedure for each sector
- Each sector has different management styles,
approaches and institutional culture. - Consider the existing norms in relation to data
exchange. - First RD Survey through interviews rather than
relying on telephonic, e-mail or postal survey. - Higher cost and labour intensive.
- Who is the target of the survey?
- Need to consider the sector and the size and
complexity of the organizations.
12Government sector Identifying target population
and survey respondents
- Units to include in surveys are
- RD institutes Public research institutes
(PRIs) Department-based research institutions
(DBRIs) - RD activities of general administrations of
central or state government. - Public institutions dealing with STS
statistical, meteorological, geological and other
public services, museums, hospitals. - RD activities at the municipality level.
- Recommendation the best way to survey is to send
questionnaires to all units known or assumed to
perform RD.
13Government sector cont..
- Department-based research institutions (DBRIs)
- Director-General or Permanent Secretary
- Issues non-availability of information in
compiled form - Public research institutes (PRIs)
- Chief Executive Officer or executive responsible
for research management
14Higher education sector Identifying target
population and survey respondents
- Recommendation The surveys and estimation
procedures should cover all universities and
corresponding institutions, especially those
awarding degrees at the doctorate level. Other
institutions in the sector known or assumed to
perform RD should also be included. - Identification generally easy.
- preferable to use smaller units, such as
departments or institutes of the university, as
statistical units.
15Higher Education sector cont..
- Higher Education institutes (HEIs) are the main
seat of RD activity - Different degree of autonomy
- Staff employed as civil servant list of
employees is available - Academics directly employed by HEI staff
details are protected - Maturity of HEIs and historic relationships with
Government - Researcher CV database
- Publications databases (Web of Science or
Scopus) - If there is no central registry approach
through Vice Chancellor or Dean of Faculties,
Dean of Research or, Head of Departments.
16Business enterprise sector Identifying target
population and survey respondents
- The enterprise is recommended as the main
statistical unit in the business enterprise
sector - Some enterprises perform RD on a regular basis
from year to year, and may have one or several
RD units - Other enterprises perform RD only occasionally
- It is recommended that all enterprises performing
RD, either continuously or occasionally, should
be included in RD surveys.
17Business enterprise sector Survey population
first possible approach
- A census-based survey of large enterprises and a
sample of smaller ones in order to identify RD
performers and request the information from them - RD performed in the past in the enterprise is
not considered - this is the approach followed in innovation
surveys - very small enterprises and enterprises in certain
less RD-intensive industries often excluded for
cost reasons - when the sample size is very small, estimates may
be less reliable, owing to raising factors - Method not strictly followed in any country
18Business enterprise sector Survey population
second possible approach
- Try to survey all enterprises known or assumed to
perform RD, based on a register of
RD-performing enterprises - lists of enterprises receiving government grants
and contracts for RD - lists of enterprises reporting RD activities in
previous RD surveys, in innovation surveys or
other enterprise surveys - directories of RD laboratories
- members of industrial research associations
- employers of very highly qualified personnel
- lists of enterprises claiming tax deductions for
RD.
19Business enterprise sector Survey population
joint approach
- Recommendation
- To include in RD surveys of the business
enterprise sector all firms known or supposed to
perform RD. - To identify RD performers not known or supposed
to perform RD by a census/sample of all other
firms - In the industries on the next slide.
- In principle, enterprises in all size classes
should be included, but if a cut-off point is
necessary, it should be at ten employees.
20Business enterprise sector Industries to be
included
Industry ISIC Rev. 3/NACE Rev. 1
Mining 14
Manufacturing 15-37
Utilities, construction 40,41,45
Wholesale 50
Transport, storage and communication 60-64
Financial intermediation 65-67
Computer and related activities 72
RD services 73
Architectural, engineering and other technical activities 742
Plus any other industry relevant for the country
21Business sector cont
- RD performed in business sector remains low in
many developing and emerging economies. - How to detect RD activity in Business?
- trade associations, or chambers of commerce.
- businesses listed on the main stock exchange.
- large firms/MNC - discussion with the Chief
Financial Officer or Chief Technology Officer. - missing a large firm might result in significant
error. - exclude holding companies, construction, retail,
and utilities as sub-sectors likely to perform
little or no RD. - list of business beneficiaries of research or
innovation grants by NRC. - cooperation with the departments responsible for
RD tax incentives.
22Business enterprise sector Structural issues
- Publicly-owned businesses play a major role in
RD in some developing countries - Recommendations
- should consider issuing data for publicly-owned
businesses separately from the fully private
enterprise sector. - private enterprises could also be disaggregated
by ownership, in particular the various degrees
of foreign ownership.
23Business enterprise sector Structural
issues cont..
- Business enterprise RD is presumed to be
generally weak in developing countries when
compared to industrial countries. - Recommendations
- take into account when conducting sample surveys,
perhaps by over-sampling, especially amongst
larger companies. - big companies should not be missed out as it
might imply significant error. - invest time in interviewing key firms to
understand their RD function and obtain a clear
picture of their activity.
24Private non-profit sector Identifying target
population and survey
- Private non-profit (PNP) sector make a
significant contribution to RD in developing
countries, but the sector tends to be very
volatile - Same challenges as in business difficulty in
identify PNPs engaged in RD - Not clear about, status ownership.
- Engaged in wide range of activities.
- Perform in-house RD as well as contract RD.
-
25Private non-profit sector cont..
- The sources for identifying possible survey
respondents are mainly the same as for the
government sector. - Register information may be less comprehensive
and could be completed by information from
researchers or research administrations. - This sector may be more relevant for surveys on
RD funding.
26Who is the right respondent?
- RD Manager
- Better understanding of RD and FM norms
- But may not be able to supply exact figures
- Accountant or personnel manager
- May not refer exactly to RD as defined in FM
- But able to supply exact figures
- Cooperation of all three may be needed
- Useful to identify in advance the person
responsible for providing information and for
co-ordinating information from smaller sub-units
27Working with respondents
- Questionnaire simple and short, logical and with
clear definitions and instructions - Optional simpler survey for smaller units
- Test questionnaires on a sample of respondents
28Survey procedure and estimation
- Recommendations
- Attention needs to be paid to questionnaire
design. - Frequency of survey.
- Prioritize area of work accompanied by
step-by-step approach. - Use of survey questionnaires of other countries
for inspiration need adaptations to local
situation. - Get expertise from the NSO, in conducting survey,
in sampling.. - Different questionnaires might be designed for
different sectors based on stakeholder
consultations. One size does not fit all. - Procedures need to be developed for estimating
missing data.
29Encouraging co-operation
- Secure co-operation of respondent
- Make them appreciate the potential uses of the
data - Respect confidential data
- Minimise the response burden
- Share the results (option customised
information) - Provide technical assistance and contact details
30Estimations
- RD measurement could be done in three stages
- Identification of all specialised RD units and
measurement of their total activity. - Estimates of the non-RD portions of their
activity and subtraction of these estimates from
the total. - Estimates of the inputs used for RD in other
units and addition of these estimates to the
total.
31Operational criteria
- Tools for translating theoretical FM concepts
into practical questionnaire - Explanatory notes
- Hypothetical examples
- Guidance to individual respondents
- Documentation on treatment of different cases
32Estimation procedures
- Imputation methods for item non-response
- Use previous answer
- Hot decking (use info from same survey)
- Cold decking (use info from previous survey)
- Imputation methods for unit non-response
- Use past RD data (adjusted for sales or
employment growth) - Impute as a function of the relation to personnel
or sales (test with non-response analysis)
33Thank you!
- http//www.uis.unesco.org
- r.pathirage_at_unesco.org
-
-