Laptop/PC GPRS Configuration for Windows XP

1
Laptop/PC GPRS Configuration for Windows XP
2
Ways of Connecting your laptop

• Using Bluetooth
• Using data cable
• Using infrared link

3
Before starting

• Subscription to GPRS is a prerequisite
• Confirm that the handset supports IR reception
  and same is available on your laptop
• In case of connecting through data cable, make
  sure the data cable is attached and the mobile is
  detected by the computer

4
Laptop settings

• Click on to my computer and then control panel

Click here
5
In printer and hardware option

• Click on to phone and modem setting

Click on phone modem
6
Phone and modem tab

• In the modem tab select standard modem over IR
  link

7
Phone and modem option

• Click on to dialing rules tab in the phone and
  modem option
• Press edit button

Edit button
8
Edit location

• In the edit location window, click on to the
  general tab
• Select tone option
• Press ok

Select tone
9
Phone and modem tab

• Click on the modem properties

Click on to properties
10
Modem properties

• Select maximum port speed

11
Modem properties

• Click on to the advance tab and enter the extra
  initialization commands
• NOTE Please do not copy paste the mentioned
  string, Only manual typing is required.

For Post Paid ATCGDCONT1,"IP",ufone.internet
CGQREQ1,3,4,3,2,31CGQMIN1,3,4,3,2,31 For
Pre Paid ATCGDCONT1,"IP",ufone.pinternetCGQ
REQ1,3,4,3,2,31CGQMIN1,3,4,3,2,31 For U-Mail
Account ATCGDCONT1,"IP",umail.internetCGQRE
Q1,3,4,3,2,31CGQMIN1,3,4,3,2,31
If your system is not being supported the above
string then type the following string. For Post
Paid ATCGDCONT1,"IP",ufone.internet For
Pre Paid ATCGDCONT1,"IP",ufone.pinternet For
U-Mail Account ATCGDCONT1,"IP",umail.internet

12
Modem properties

• Confirm the correct initialization string, in
  order to avoid any errors while connecting
• Click on to the advance port settings

Click here
13

• In the advance port settings uncheck the use FIFO
  buffers
• Select the com number currently in use
• Press ok button

COM in use
14

• Click on to change default preferences button
• Select port speed to maximum
• Select hard ware flow control to none
• Press ok and exit modem properties

Max port speed
Flow control to none
15
Setting up a new dial up connection

• Go to my computer control panel
• Click on to network and internet connection

Click here
16

• Click on to network connection

Click here
17

• Click on to create a new connection

Click here
18

• Click on to the next button on the new connection
  wizard

Click next
19

• Select connect to the internet option
• Press next button

20

• Select set up my connection manually
• Press next button

Select
Press next
21

• Select connect using a dial up connection
• Press next

select
Press next
22

• Enter Ufone as ISP name
• Press next

Enter Ufone
Press next
23

• Enter 991 in the phone number field
• Press next

24

• Uncheck the options and leave the fields blank
• Press next

25

• Press next button to finish to complete the
  connection wizard