AUTO-VISION

1
AUTO-VISION

• Electronic 3-D Measuring
• And
• 4 Wheel Alignment System

2
Cabinet and Computer

• The cabinet can be
• Located anywhere
• convenient, as it
• doesnt need to be
• close to the actual
• work area . . .
• as the Measuring tower
• has it own PDS
• (personal display system).

3
Measuring towers

• There is a measuring
• tower on each side of
• the vehicle. Each
• measuring tower has
• its own handheld and
• measuring arm that
• can be extended or
• retracted.

4
Rails

• A measuring rail is
• mounted on each
• side of the rack for
• the measuring
• towers to roll on.

5
Wheel alignment

• Wheel alignment
• is very easy to do . . .
• simply press the
• alignment button on
• the handheld and
• follow the instructions
• on the display screen.

6
Reports

• Reports can be
• done before, during
• and after the repairs
• along with before and
• after wheel alignment.

7
Measuring toe angle

• Measuring toe is
• done by measuring
• the rear of the wheel
• then the front of the
• wheel

8
Measuring camber angle

• Measuring camber
• angle is done by
• measuring the bottom
• of the wheel, then the
• Top of the wheel.

9
Measuring caster angle

• Caster angle is done
• by turning the front wheel
• inward 10 degrees and
• measuring the camber
• angle. Then turn the
• wheel outward 10 degrees
• and measure the camber
• angle. The computer will do
• the calculating and display
• the caster angle.

10
Under body measuring

• a

11
Measuring apron and A pillars

• a

12
Measuring upper body panels
13
Using measuring to position dedicated fixtures

• a

14
Use fixtures along with measuring arm

• a

15
Check out different repairs using the AUTO-VISION
16
(No Transcript)
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
Full frame repairs
21
Attach arms to monitor pulls
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
Again attach arm to monitor the pull
26
(No Transcript)
27
(No Transcript)
28
(No Transcript)
29
(No Transcript)
30
(No Transcript)
31
Rear end repairs
32
(No Transcript)
33
(No Transcript)
34
Side repair
35
(No Transcript)
36
(No Transcript)
37
(No Transcript)
38
(No Transcript)
39
(No Transcript)
40
THE END

• Call CJJ, Inc. 1-800-445-8244 or 218-847-2608