Title: Environmental, Health and Safety Considerations in Construction Projects
1Environmental, Health and Safety Considerations
in Construction Projects
- Successful Project Planning
2Topics
- Environmental Issues Impacts
- Fire and Life Safety
- Construction Site Safety
- Insurance
3Environmental Issues
4Asbestos Assessment
- Every project is subject to having Risk
Management verify the presence or absence of
asbestos-containing materials (ACM) and
developing a scope of abatement in conjunction
with the Project Manager (PMs). - Document all verifications in writing
5Planning Abatement Actions
- An accurate scope of abatement will ensure
projects are completed within budget and on-time - RM needs to review the project scope during the
design phase - To accurately estimate abatement costs and
timeframe - Plans review
- Building inspections to identify or confirm the
type and extent of ACM - Abatement actions and demolitions typically
- require 10-day notification to a local regulatory
agency - occur prior to the start of construction, but may
occur in planned phases throughout the project if
necessary
6Funding Asbestos Actions
- Each project is responsible for funding all
asbestos-related actions including - Building inspections/surveys and accompanying
laboratory analyses - All environmental consultant and contractor costs
including waste disposal - On a funds-available basis Risk Management
covers abatement costs for - OM of plant
- small carpet replacement projects
7Scheduling Asbestos Actions
- All asbestos services requests
- Allow sufficient turnaround time for surveys,
estimates or bids - General timeframes and guidance (RSK 106)
- Asbestos Abatement Project Management
Responsibility Matrix - Request for Asbestos Services form
- Emergency or peak season abatement involves
paying premium costs
8Building Owner Liability/Worker Protection
- ASU must notify contractors
- location, extent and type of ACM in or adjacent
to the work area - Utility tunnel system Restricted Access Provision
(RSK 109) - Any other known hazards
9Emerging Issues
- Lead paint
- If known to be present, notify the contractor
- Painted wooden or metal structures highly suspect
of lead paint and building constructed before
1978 - Concentrated lead paint waste is hazardous waste
and must be tested prior to disposal
10Confined Space Entry
11A Confined Space is a Space That
- Is large enough and so configured that an
employee can bodily enter and perform assigned
work and - Has limited or restricted means for entry or
exit and - Is not designed for continuous human occupancy.
12Two Types of Confined Spaces
- Permit Required
- Non-Permit Required
13Indoor Air Quality Management
- Undertaking Construction Remodeling Activities
- Things to Think About Before You Start
14Common Pollutants Sources
- Particulates (dust fibers)
- Volatile Organic Compounds (VOCs)
- Combustion Products (exhaust, smoke)
- Biological Materials (mold, bacteria)
- Other (sewer gas, ozone, metal fumes, ammonia,
chlorine)
15Six Steps to Avoid IAQ Complaints
- Initial Planning Identify contaminants,
pathways, and controls - Isolate Major Construction Areas and Use Source
Control - Protect the Ventilation System
- Notify Occupants
- On-going Management
- Consult References ASHRAE/ANSI, SMACNA, EPA
16Other Activities That Impact IAQ
- Water Restoration
- Custodial Activities
- HVAC Maintenance
- HVAC Ventilation Design
- Pesticide Applications
- Roofing Projects
- Painting
- Asbestos Abatement
17Other Environmental Impacts
18Other Environmental Issues
- EPA
- Hazardous Materials Waste
- Air Pollution Permit
19Hazardous WasteLamp and Ballast Disposal
- Hazardous Waste
- Universal Waste Compliance Guidelines
- All electronic lamps
- All ballasts
- Risk Management manages shipment from ASU
- Project Manager ensures
- Removal of devices from discarded fixtures
- Lamps and ballasts are packaged in appropriate
drums. -
20Air Pollution Permit
- Fuel Burning Equipment
- Boilers/Generators
- Hazardous Air Pollutants
- Solvents and Paints
- Designed to monitor air pollution generating
equipment - Notification prior to installation
- Engineering Description Equipment and Operation
- Estimated Emissions
- May require a permit modification
- Time and money
-
21BREAK
22Fire and Life Safety
23Plans Review Approval
- State Law
- All plans specifications for construction,
remodel, etc for any state, county, or public
school SHALL be submitted to the State Fire
Marshal prior to construction. - Two Review Stages
- Preliminary/Estimating/Planning
- Approved to Proceed Funded
24Building Fire Code
- Code Analysis Research/Study
- Plans Review
- Inspection Phases
25Fire Protection System
- Three Fire Protection Categories
- Fire Separation (Automatic Manual)
- Fire Detection (Automatic Manual)
- Fire Suppression (Automatic Manual)
26Fire Protection System
- Most Common Rules for Upgrades
- Existing Nonconforming Conditions
- 50 of Value
- 50 of Square Footage
- Accumulation of Projects
- Type of Occupancy
- Hazardous Conditions/Concerns
- Occupied Construction Concerns
27Certificate of Occupancy
- Certification of all life safety systems are
inspected, tested, and verified operational per
code (C of O by State Fire Marshal) - Green Tag Yellow Tag
(Red Tag no occupancy allowed) - Inspector Checklist
- Punch List
28Construction Site Safety and Petroleum Fuel
Storage
29Petroleum fuel storage (PFS) Underground
Storage Tanks (USTs)
- Notify RM when
- A project increases or decrease PFS on campus,
i.e., storage tanks, generators, exterior wet
transformers - USTs
- In-service underground tanks located at
- Central Plant/Motor Pool
- No other known USTs remain on campus
30Construction Site Safety
- Safety measures may exceed regulatory
requirements - Contractors responsibility
- comply with OSHA
- RM involvement
- A contractor performing an unsafe act
- Inspect in tandem with PM ? PM notifies
contractor ? contractors mitigates or is reported
to OSHA - An ASU employee performing an unsafe act
- Inspect area ? notifies department/supervisor ?
supervisor mitigates situation
31Construction Liability and Property Insurance
32Insurance Coverage
- Third Party Liability
- Direct any injured 3rd party to RM
- ASU Property (real or personal)
- Damaged by contractor ? covered by contractor
- Damaged by vandalism, flooding, lightning
strikes, etc. ? covered by State of Arizona - Exclusions obsolescence, maintenance, and
mysterious disappearance
33Insurance Recovery Projects
- RM
- Processes claims/liaison to State Risk Management
- Property claims must be submitted within 90 days
from date of loss or discovery - 10,000 real property damage ? SRM notified
within 24 hours - PM and Trade Shops
- Restores property
- Manage project per ASU protocol
- SRM approval needed on large projects
- 1 year total restoration time or request
extension
34Questions Answers