Title: Identification and Management of Shock Sensitive
1Identification and Management of Shock Sensitive
Reactive Chemicals
- Lydia Boada-Clista
- U.S. Department of Energy
- Ohio Field Office
2Identification and Management of Shock Sensitive
Reactive Chemicals
- Thousands of containers of chemicals are in use
at DOE facilities and laboratories. Amongst
these are several classes of chemicals that may
pose significant health and safety risks to the
worker. These include - - Shock
- - Reactive Chemicals, and
- - Energetic Compounds
3Identification and Management of Shock Sensitive
Reactive Chemicals
- This presentation focuses on the following
aspects of chemical management - - Identification of Highly Hazardous
Chemicals - - Management and Handling of Highly
Hazardous Chemicals - - Treatment and Disposition of Shock
Sensitive Chemicals - - Identification of Energetic Compounds
4Identification and Management of Shock Sensitive
Reactive Chemicals
- - Management of Energetic Compounds
- - Handling and Disposition of Energetic
Compounds - - Regulatory Issues
- - Recent Chemical Disposition Efforts at
Mound - - Questions and Answers
5Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification of Highly Hazardous Chemicals
- - Over 60,000 chemicals, trade names and
synonyms - - Many of these pose high hazards through
their reactive or highly toxic nature - - Many of these are present at DOE
facilities and laboratories
6Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification (cont..)
- - REACTIVE CHEMICALS are those chemicals
that react with air, water or other materials
resulting in the generation of toxic gases or
large quantities of heat. The gas and heat
generation may result in significant pressures
when the material is compressed or contained.
7Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification (cont)
- - PEROXIDIZABLE COMPOUNDS are
- solvents and reagents (i.e., ether, dioxane,
THF) that form reactive peroxides by
reacting with molecular oxygen through a
process called autoxidation or
peroxidation. - Peroxides in solutions greater than 1 percent
present a - significant hazard
- Lower concentration may still be hazardous if
peroxides - have accumulated on the walls of the container
or near - the cap
8Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification (cont)
- - Reactive Chemicals May Cause
- Spontaneous combustion, conflagration or
explosion - Generation of toxic gas such as hydrogen cyanide
or - hydrogen Sulfide
- - Peroxidizable Chemicals Become More
- Dangerous as Time Passes
- Formation of shock sensitive peroxides
- Common in certain highly volatile chemicals
- Also possible with Organometallic compounds
9Identification and Management of Shock Sensitive
Reactive Chemicals
- Management Handling Highly Hazardous Chemicals
- - Have an Effective Chemical
Management Program at Your Site - - Have Written Procedures and Training at
- Your Facility for Proper Management
- - Have Procedures that Specify Actions to
- be Taken When Problems are Identified
10Identification and Management of Shock Sensitive
Reactive Chemicals
- Inventory Control
- - Maintain Up-to-Date Chemical Inventory
- - Create a Subcategory on Inventory to
- Track High Hazard Chemicals, Especially
- Peroxidizable Chemicals
- - Use Chemicals on a First-In / First-Out
Basis - - Purchase and Store Small Quantities (Only
- what will be used in a three to twelve
month - period)
- - Look for Less Hazardous Substitutes
- - Ensure Proper Labeling
-
-
11Identification and Management of Shock Sensitive
Reactive Chemicals
- Management Handling (cont.)
- Storage and Use
- - Proper Storage, as Applicable, for
Chemicals - Flammable Cabinets
- Temperature Control
- Inert Atmosphere
- Keep Containers Sealed Tight
- - Refer to MSDS for Special Requirements
- Store out of Light and Away from Heat
- or Ignition Sources
12Identification and Management of Shock Sensitive
Reactive Chemicals
- Management Handling (cont..)
- - Sunlight is Especially Dangerous
- - Treat all Peroxidizable Chemicals as if
They Have Peroxide Accumulation - - Test Peroxidizable Compounds for
Peroxide Accumulation - - Dispose of Older or Unused Chemicals
- - Use Caution When Distilling or
Evaporating Peroxidizable Chemicals
13Identification and Management of Shock Sensitive
Reactive Chemicals
- Management Handling (cont..)
- - Testing for Peroxidization
- Test every three or twelve months depending on
the chemical - Use the proper test methods (iodide test,
ferrous - thiocyanate test, and test strips)
- Test only actively used chemicals
- - Inspect Containers Prior to Each Use
- Check for discoloration
- Check for crystallization
14Identification and Management of Shock Sensitive
Reactive Chemicals
- Treatment Disposition
- - Do Not Handle or Open Containers Suspected
of Containing Accumulated Peroxides - - Do Not Open Containers That Have Been
Stored For Long Periods Without Testing - - Keep Personnel Out of the Area
- - Post and Control Access to the Area
- - Contact Trained Specialist, the Fire
- Department, or the Bomb Squad
15Identification and Management of Shock Sensitive
Reactive Chemicals
- Treatment Dispositions
- - Treatment by Passing Through a Column of
Activated Alumina - - Treatment of Water-Soluble Compounds
- With a concentrated Ferrous Salt
Solution - - There are Several Other Reduction Methods
Each Specific to the Type of Peroxidized
Compound - - Controlled Detonation by Bomb Squad
16Identification and Management of Shock Sensitive
Reactive Chemicals
- Treatment Disposal
- - Reactive Metals Can be Placed Into Stable
Environments - Handling Methods
- - Handle with Remote Equipment
- - Handle in Inerted Containment
- - Use of Intrinsically Safe Tools and
Equipment - - Use Proper Personal Protective
Equipment
17Identification and Management of Shock Sensitive
Reactive Chemicals
- Disposal
- - Disposal by Detonation or Burning
- - Disposal through Professional Waste
- Management Company
18Identification and Management of Shock Sensitive
Reactive Chemicals
- Special Conditions for Radiological Facilities
- - Must Address Radiological Facilities
- - Detonation not a Viable Method
- - Stabilize/Reduce Peroxides and Add an
- Inhibitor
- - Sample for Radiological Contamination
and Attempt Unrestricted Release to a Waste
Disposal Facility - - Solidify in Polymer if Contaminated
19Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification of Explosive Compounds
- - Numerous Energetic Compounds Have Been and
are Still in Use at DOE Facilities - - Used for Manufacture of Explosive
- Components
- - Discovered Frequently at Facilities
- Undergoing Decommissioning
- - Usually in Gram Quantities or Less
- - Can Present Significant Risk to Workers
20Identification and Management of Shock Sensitive
Reactive Chemicals
- Identification of Explosives
- Types of Energetic Material
- PETN Lead Axide
- TATB HMX
- HNS PBX
- HNAB N Lead Styphnate
- RDX TIHX
21Identification and Management of Shock Sensitive
Reactive Chemicals
- Managing Energetic Compounds
- - Follow the Requirements of the DOE
- Explosives Manual
- - Have Written Procedures for Management of
These Materials - - Have Trained and Qualified Personnel
- - Maintain an Up-to-Date Inventory
22Identification and Management of Shock Sensitive
Reactive Chemicals
- Managing Energetic Compounds
- - Proper Storage
- - Grounded Work Surfaces
- - Intrinsically Safe Tools and Equipment
- - Store and Transport Using Explosives Cases
- - Follow Posted Guidelines and Quantity
- Restrictions
- - Proper Personal Protective Equipment
23Identification and Management of Shock Sensitive
Reactive Chemicals
- Disposition of Energetic Materials
- - Package and Ship to a Waste Disposal
- Company Licensed to Handle Explosives
- - Mound Used Safety Kleen (Formerly
Laidlaw Thermal Services) in Louisiana - - Determine if Other Facilities can Use
- These Materials or Devices
- - Special Requirements for Shipping and
Transportation
24Identification and Management of Shock Sensitive
Reactive Chemicals
- Radiological Issues
- - No Commercial Disposal Option if Energetic
Materials have Radiological Contamination - - Dissolve Material in Appropriate Solvent
- - Sample for Radiological Activity
- - Attempt Unrestricted Release to
Commercial Waste Disposal Facility - - Solidify/Polymerize Material if
Contaminated
25Identification and Management of Shock Sensitive
Reactive Chemicals
- Regulatory Issues
- - OSHA (Lab Safety and Industrial
Standards) for Storage and Handling - - OSHA (HAZWOPER) for Disposition
- - RCRA (Hazardous Waste Requirements-
- Most of These Chemicals will be D001
Ignitable and/or D003 Reactive Waste) - - RCRA (Emergency Treatment Permit,
- Temporary Treatment Permit, or Generator
- Treatment)
26Identification and Management of Shock Sensitive
Reactive Chemicals
- Recent Efforts At Mound
- - Mound Chemical Disposition Project 1998
- Disposed of more than 8000 containers of
- excess chemicals
- gt 1000 Gas Cylinders
- gt 1000 RCRA Hazardous Chemicals
- gt 750 Mixed (Radioactive/RCRA) Chemicals
- gt 2200 Non-Radioactive Chemicals
- gt 3000 Radioactive Chemical
- gt 750 Unknowns Sampled Characterized
27Identification and Management of Shock Sensitive
Reactive Chemicals
- Mound (cont.)
- - 15 Container of Ether, Dioxane, and THF
- Stabilized and Inhibited. These were
then Sampled, Released and Sent to Off- Site
Waste Disposal - - 2 Containers of Potassium Metal were
- Surveyed, then Stabilized in an Inerted
Glove Box with Mineral Oil, and Released for
Off-Site Disposal -
28Identification and Management of Shock Sensitive
Reactive Chemicals
- Mound (cont)
- - 17 Classified Energetic Components were
Machined on a Remote Operation Lathe to
Remove Energetic Material and Declassify the
Component - - 27 Energetic Powders from a Radiological
Contamination Area were - Dissolved in Acetone or DMSO, Sampled, and
Released for Off-Site - Waste Disposal
-
29Identification and Management of Shock Sensitive
Reactive Chemicals
- Mound (cont.)
- - Packaged and Shipped Remaining 95
- Energetics Off-Site for Disposal
- - Disposed of 48 Reactive Pyrotechnic
- Powders
- - No Contamination Incidents
- - No Spills or Releases
- - No Accident or Injuries to Workers
30Identification and Management of Shock Sensitive
Reactive Chemicals
- Questions Answers
-
- Credits
- - Babcock Wilcox of Ohio (Mound)
- - John Ross, Los Alamos Technical
- Associates