AirMux200 Product Launch

1
AirMux-200Product Launch
Ramon Horkany Product Line Manager Ramon_h_at_rad.co.
il
2
AirMux-200 Highlights

• Up to 48 Mbps air interface throughput
• Net payload is 18 Mbps, full-duplex
• Combination of E1 or T1 and Ethernet
• Range up to 80 km/50 miles
• Carrier-class performance
• RADview SNMP network fault management
• Easy to install

Rate is adaptive to range
3
Roll Out

• Released
• 5.725 - 5850 GHz
• Up to 2 x E1 or 2 x T1, and Ethernet
• December 2004 Pre-Release Version
• 5.250-5.350 GHz
• 2.400-2.4835 GHz ETSI and FCC regulation
• 4 x E1 or 4 x T1 ports, and 2 x Ethernet ports
• Carrier-class indoor unit (IDU)
• Power over Ethernet IDU
• February 2005 Pre-Release Version
• 5.470-5.725 GHz complying with ETSI and FCC
• Supports Transmit Power Control (TPC) and Dynamic
  Frequency Selection (DFS)
• Encryption according to AES 128

4
Typical Application
HQ
Remote Site
Packet
Server
Up to 80 km/50 miles
Switch
Switch
LAN
LAN
PBX
V24
Megaplex
AirMux-200
AirMux-200
n x E1
n x E1
n x FXS
V.35
PSTN
Router

• Main Drivers
• Fast ROI versus leased lines
• Fast deployment and equipment reuse
• Broadband infrastructure enabler
• Backup for terrestrial lines

5
AirMux-200 System ComponentsOutdoor Units (ODU)

• ODU with integrated antenna, includes pole and
  wall mount brackets
• ODU for connecting an external antenna, includes
  N type connector
• Standard outdoor Cat.5e cable for connecting ODU
  to IDU

6
Indoor Unit (IDU) Configurations

• IDU Standard indoor unit
• Ethernet
• Ethernet E1 or T1
• Ethernet 2 x E1 or 2 x T1
• IDUE Carrier-class indoor unit
• 2 x Ethernet 4 x E1 or 4 x T1
• IDUD Power over Ethernet unit
• Ethernet

7
Air Interface Features
8
Typical Throughput
Figures are for 22 dBi integrated antenna, at
5.725-5.850 GHz band. Maximum range is 80
km/50 miles with 28 dBi antenna at same band.
9
Carrier-Class Performance

• Jitter and wander according to G.823.4
• Clock recovery (lt0.05 PPM)
• E1 delay is 8 msec
• TDM circuit BER lt 10e-11 _at_ sensitivity threshold
• Ethernet delay less then 3 msec
• Lossless Ethernet traffic

10
Management

• Airmux Manager
• SNMP-based
• Installation wizard
• Link-based configuration for management of link
  with single IP address
• On-line monitoring of air interface, E1/T1 and
  Ethernet services
• Maintenance
• E1/T1 Local and Remote loopbacks
• Over-the-air software upgrade
• RADview SNMP Network Fault Management

11
Easy Installation and Alignment

• No need for digital volt meter (DVM)
• Survey performed by ODU
• Audio indication for optimal received signal
  strength (RSS)
• Per-link configuration and settings
• Unique system signal identification
• No pre-installation setting is required
• Light-weight ODU

12
License-Free Coverage
Special limitations or requirements may apply
here

• Regulated coverage in many other regions

13
AirMux-200 Applications

• AirMux-200 provides a high return on investment
  in a variety of campus, enterprise and service
  provider applications. These include
• Lossless Hot Spot Backhauling
• Telephone Service Extension to Remote/Rural
  Locations
• Multiple Services in Daisy Chain Topology
• Multiple Services with Unique E1/T1 Ring
  Protection
• Emergency Services and Temporary Deployment
• Wireless Backup
• Interconnecting Multiple Legacy Services over
  Packet Networks
• Cellular Backhaul
• Cellular Backhaul with TDMoIP Mesh Protection
• Voice Traffic Extension over Wireless

14
Lossless Hot Spot Backhauling
ISP
Hot Spot
5.x or 2.4 GHz
Ethernet
Ethernet
Packet
AirMux-200
Router
AirMux-200
Access Point

• Supports full 5.x GHz and 2.4 GHz bands for
  lossless hot spot backhauling including band and
  channel separation
• Transparent Ethernet forwarding
• Ethernet and power over Ethernet ODU/IDU
  connection

15
Telephone Service Extension to Remote/Rural
Locations
5.x or 2.4 GHz
Remote/Rural Location
MP-104/204
E1
MP-2104/2100
E1
AirMux-200
PSTN
CPE
AirMux-200
E1
Remote/Rural Location
5.x or 2.4 GHz
MP-104/204
Central Site
E1
AirMux-200
AirMux-200
CPE

• Extends telephony services to remote or rural
  areas
• Megaplex units serve as channel banks at the
  remote end, and as aggregation devices at the
  center

16
Multiple Services in Daisy Chain Topology
AirMux-200
AirMux-200
AirMux-200
AirMux-200
MP-2104
FCD-IP
MP-2104
FCD-IP
V.52

• Drop-and-insert topology saves cost of lease
  lines or infrastructure investment
• Drop of any service
• Optimized solution for specific node
  requirements
• Target markets utilities, cellular,
  transportation

17
Multiple Services with Unique E1/T1 Ring
Protection
Fire Alarm
FCD-IP
MP-2104
4 x E1/T1 Ring

• Typical users
• Campus
• Cellular
• Utilities

• Unique ring protection
• Optimized solution for specific node requirements
• Any service

MP-2100
NMS
PBX
Servers
18
Emergency Services and Temporary Deployment
Central Site
AirMux-200
Remote Site
n x links
Switch
Switch
Megaplex
AirMux-200
n x E1
AirMux-200
DXC

• Enables mobility and fast deployment
• Typical users military, emergency services,
  broadcast, etc.

19
Wireless Backup
Site B
Site A
AirMux
AirMux
CPE
CPE
DXC
DXC
G.703
G.703
F.O or Copper
RADview NMS

• Automatic switch-over with DXC
• Typical users financial organizations,
  government, military

20
Interconnecting Multiple Legacy Services over
Packet Networks
Router
AirMux-200
V.35
IPmux-14
AirMux-200
Ethernet
LAN
IPmux-8/16
Ethernet Services
4-16 E1/T1
Ethernet
PBX
n x E1/T1
IPmux-14
Ethernet over Fiber Cable PLC
Ethernet
LAN
NMS

• End-to-end transmission of multiple user services
  over IP, with central demarcation and aggregation
  IPmux units
• Adds Ethernet traffic engineering tools such as
  rate limiting and VLAN stacking
• End-to-end service provisioning with
  RADview-SC/TDMoIP

21
Cellular Backhaul
BTS Site
BTS
BSC Site
AirMux-200
n x E1
Switch
Packet
10/100BT
AirMux-200
BSC
n x links
TDM
BTS Site
E3
BTS
n x E1
AirMux-200
DACS
Ethernet
AirMux-200

• Integration of cellular, monitoring and
  management traffic
• Future migration to IP 3G BTS
• Cost-effective alternative to Microwaves
• High link availability

• 0.05 ppm clock recovery
• 8 msec E1 or T1 delay
• 3 msec Ethernet delay

22
Cellular Backhaul with TDMoIP Mesh Protection
BTS Site
BTS
BSC Site
1-4 x E1
AirMux-200
IPmux-14
BSC
2 x 10/100BT
AirMux-200
Up to 16 x E1
Backbone
BTS Site
n x links
n x F.Eth
IPmux-16
BTS
1-4 x E1
AirMux-200
IPmux-14
2 x 10/100BT
AirMux-200

• Complies to clock accuracy, jitter and wander
  GSM requirements
• Protection via packet ring or mesh topology
• 25-50 equipment savings versus 11 protection

23
Voice Traffic Extension over Wireless
Branch 1
PBX
Up to 80 km/50 miles
E1/T1
Vmux-110
AirMux-200
Headquarters
AirMux-200
Router
Vmux-2100
Branch 2
E1/T1
PBX
IP / TDM Network
IP or E1/T1
E1/T1
Vmux-110
PBX
E1/T1
PSTN

• High link utilization with up to 161 compression
  ratio
• Enables extending E1 or T1 over IP for up to 80
  km/50 miles

24
Summary of AirMux-200 Benefits

• Best price/performance in the industry - Fast ROI
• Combination of up to 4 x E1/T1 plus Ethernet,
  with high traffic throughput
• High link availability with carrier-class
  performance
• Reduction of deployment time and expenses as part
  of a complete interoperable solution with other
  RAD devices (e.g. Megaplex Multiservice Access
  Multiplexers)
• Management of hundreds of links and access
  devices from a single SNMP fault management
  application
• Enhanced security with standard encryption
  mechanism
• Easy deployment via installation and alignment
  tools

25

• Thank You

for your attention
www.rad.com