30 Tube Solar Installation By Smart Solar - PowerPoint PPT Presentation

1 / 15
About This Presentation
Title:

30 Tube Solar Installation By Smart Solar

Description:

Paraparaumu, New Zealand. Presentation by Zaplutus Solutions Limited ... Air Temp Max. Cloud Base (ft) Solar Collector Max. Cylinder Bottom Max. Cylinder Top ... – PowerPoint PPT presentation

Number of Views:141
Avg rating:3.0/5.0
Slides: 16
Provided by: nic1109
Category:
Tags: air | big | installation | new | smart | solar | tube | zealand

less

Transcript and Presenter's Notes

Title: 30 Tube Solar Installation By Smart Solar


1
30 Tube Solar Installation By Smart Solar
  • Paraparaumu, New Zealand

2
General Location
  • Paraparaumu 1 Hour north of Wellington
  • Average Annual Sun Hours 2,050
  • Average Annual Rainfall 1,040 mm
  • Average Summer Temperature 21oc
  • Average Winter Temperature 12oc

3
The Site
  • The Section
  • Tree Line Residential Property
  • Good North Facing Position for Collector
  • Collector set for maximum Winter Sun
  • The Occupants
  • 2 adults, 2 Children
  • Big Hot water users.

4
The Solution
  • 30 Tubes Leap Technology evacuated tube solar
    collector.
  • Made up of 1 10 Tube 1 20 Tube system
  • Purpose Built Aluminium Frame
  • Existing 180Litre mains pressure hot water
    cylinder

5
The Frame
  • Purpose built frame by Smart Solar
  • All Aluminium Construction
  • Retrofit or New Installation
  • Low Wind Resistance

6
The Frame
  • Frame laid out on roof.
  • Frame attached via 150mm stainless coach screws
    through rubber waterproof insulator

Frame in place on north facing roof To be
done Secure to Roof Add in back support
7
The Frame
  • Back Support in place.
  • Support also attached via 150mm coach bolts
    through rubber waterproof insulator.
  • Bolted to main frame.
  • Built to make face of the collector at the
    optimum latitude for the location
  • For example Kapiti 41o

Frame in place on north facing roof including
back support
8
The Plumbing
  • Copper pipe through roof into Hot Water Cylinder
  • Sealed with water proof rubber feet
  • Copper Pipe insulated with foam rubber

Insulated In flow pipe Release Valves
9
The Plumbing
  • Copper piping connected to Existing Hot Water
    Cylinder.
  • Install water pump to circulate water.
  • Pump connected to controller only in use when
    the collector and the bottom of the tank water
    temperature are greater than 8 degrees.
  • All New Copper Piping insulated with Foam Rubber

600 watt pump for circulating water
10
The Controller
  • Connected to
  • sensor at the collector (T1)
  • Sensor at the bottom of the tank (T2)
  • Sensor at the top of the tank (T3)
  • The Pump
  • Gives read outs at
  • T1
  • T2
  • T3
  • Controls the pump

Installed Controller showing T3 Output
11
Finished Installation
30 Tubes Open For Business
12
Some Live Data
Maximum Readings First Five Days of Operation
13
Some Live Data
3 hourly data readings (600am 900pm)
Collector(t1), Cylinder Bottom(t2) and Cylinder
Top (T3)
14
From the owners
  • Awesome Quick install, professional job
  • The minute all of the tubes were connected up we
    were producing hot water!
  • We want to see if we can turn off the power to
    the hot water cylinder over summer 4 to 5
    months of completely free hot water - why
    wouldnt you!
  • Nice to support New Zealand technology.
  • These should be part of every new house build.

15
More Information
  • Smart Solar
  • Ph 0274 421 764
  • Fax 64 4 297 1403
  • www www.smartsolar.co.nz
  • Email info_at_smartsolar.co.nz
Write a Comment
User Comments (0)
About PowerShow.com