HAMMER MAZE

1
HAMMER MAZE
2
CEILING BOLT
3
FLOOR BOLT
4
POSTS THESE ARE TWO SIZES OF SQUARE METAL POSTS
ONE SLIDING IN OTHER. THERE IS A CLIP THROUGH
THIS THAT HOLDS THE POST AT A CERTAIN HEIGHT. THE
BOTTOM AND TOP ARE PLACED OVER THE BOLTS IN FLOOR
AND CEILING. THE TWO POSTS ARE SLID APART AND
LOCKED INTO PLACE
5
LATCHES HOLDING PANELS IN PLACE
6
SLIDING LATCH
7
PANELS FASTENED TO POSTS
8
(No Transcript)
9
PANEL TO SIMULATE WALL STUDS
10
PROP LAID ON FLOOR TO SIMULATE RAFTERS
11
(No Transcript)
12
(No Transcript)
13
(No Transcript)
14
RAMP TO SECOND FLOOR SO YOU WILL HAVE TO GET
LADDER TO CLIMB OR USE OTHER METHODS
15
(No Transcript)
16
METHOD THAT WE WILL BE USING IN OAK HARBOR
USE ONE METAL POST AND THREADED POST THAT SLIDES
INTO. THIS WILL BE SCREWED UP INTO A 2X4 ACROSS
CEILING AND BOLTED INTO PLACE. THE METAL POST
WILL BE PLACED OVER A BOLT ANCORED INTO THE
FLOOR. WE WILL THEN MAKE PANELS AND HOLD IN PLACE
LIKE HAMMER