Subpart I Tool Hand

1
Subpart ITool - Hand Power

• Beginning on page 255

2
1926.300 page 255

• (b) Guarding
• (1) When power operated tools are designed to
  accommodate guards, they shall be equipped with
  such guards when in use.

3
Guards on power tools shall not be removed
Table saws, Circular saws, Nailers, Joiners
4
1926.300 page 255

• (b) Guarding
• (5) Exposure to blades.

5
lt7
6
1926.300 page 256

• (c) Personal protective equipment
• Employees using hand and power tools and exposed
  to the hazard of falling, flying, abrasive, and
  splashing objects, or exposed to harmful dusts,
  fumes, mists, vapors, or gases shall be provided
  with the particular PPE necessary to protect them
  from the hazard.

7
1926.301 page 256

• Hand Tools
• (c) Impact tools, such as drift pins, wedges, and
  chisels, shall be kept free of mushroomed heads.

8
1926.302 page 256

• Power-operated hand tools
• (b) Pneumatic power tools

9
Pneumatically powered tools with automatic
fastener feed, which operate at more than 100 psi
10
1926.302 page 256

• Power-operated hand tools
• (b) Pneumatic power tools
• (4) Compressed air shall not be used for cleaning
  purposes except when reduced to less than 30 psi.
  This does not apply to concrete form, mill scale
  and similar cleaning purposes.

11
1926.302 page 256

• (c) Fuel powered tools

12
Turn off power tools when refueling
13
1926.302 page 256

• Power-operated hand tools
• (e) Powder-actuated tools
• (5)Tools shall not be loaded until just prior to
  the intended firing time. Neither loaded nor
  empty tools are to be pointed at any employees.
  Hands shall be kept clear of the open barrel end.

14
Grinding Wheels 1926.303 (e) page 257
15
1926.307 page 260

• Mechanical power-transmission apparatus
• (o) Approved materials
• (5) Guardrails and toeboards
• (i) Guardrails shall be 42 in height with
  midrails between top rails and floor

16
1 X 4 Midrail (Min)
Toe board 4 high
Wood Posts 2 X 4s Spaced not over 8 Feet Pipe
Posts 1-1/4 I.D.
17
(No Transcript)