Review Problem: Chapter 15 - PowerPoint PPT Presentation

1 / 47
About This Presentation
Title:

Review Problem: Chapter 15

Description:

... prepared a 0.10 M solution of formic acid (HCHO2) and measured its pH using ... ( a) Calculate Ka for formic acid at this temperature. ... – PowerPoint PPT presentation

Number of Views:44
Avg rating:3.0/5.0
Slides: 48
Provided by: Sim487
Category:

less

Transcript and Presenter's Notes

Title: Review Problem: Chapter 15


1
(No Transcript)
2
Review Problem Chapter 15
  • For the equilibrium PCl5(g) PCl3(g)
    Cl2(g), the equilibrium constant Keq has the
    value 0.497 at 500 K. A gas cylinder at 500 K is
    charged with PCl5(g) at an initial pressure of
    1.66 atm. What are the equilibrium pressures of
    PCl5, PCl3, and Cl2 at this temperature?
  • Answers are 0.97, 0.693, and 0.693, respectively.

3
Chapter 16Acid-Base Equilibria
CHEMISTRY The Central Science 9th Edition
4
What Should You Understand?
  • Acids and bases
  • What are they (example)?.
  • What are their physical and chemical properties?
  • How do they affect the rate of a reaction?
  • How can they be quantified (i.e., expression of
    the concentration of an acid or base in a
    solution?

5
Acids and Bases A Brief Review
  • Acids and Bases
  • Important in biological, industrial, reactions in
    the laboratory, etc.
  • Acids taste sour and cause dyes to change color.
  • Bases taste bitter and feel soapy.
  • Arrhenius concept of acids and bases
  • Addition of acids increase H concentration in
    the solution.
  • Example HCl is an acid.
  • Addition of bases increase OH- concentration in
    solution.
  • Example NaOH is a base.
  • Problem the definition confines us to aqueous
    solution.

6
Brønsted-Lowry Acids and Bases
  • A more general definition for acids and bases,
    based on the bronsted-Lowry concept, is that
    acid-base reactions involve proton transfer.
  • Consider the H in water
  • The H(aq) ion is simply a proton with no
    surrounding valence electrons. (H has one
    proton, one electron, and no neutrons.)
  • In water, the H(aq) form clusters.
  • The simplest cluster is H3O(aq), which is called
    the Hydronium ion.
  • Larger clusters are H5O2 and H9O4.
  • Generally we use H(aq) and H3O(aq)
    interchangeably.

7
Proton Transfer
  • Focus on the H(aq).
  • According to the Arrhenius acid definition, an
    acid increases H and a base increases OH-.
  • Brønsted-Lowry acid donates H and base accepts
    H.
  • Brønsted-Lowry base does not need to contain OH-.
  • Consider HCl(aq) H2O(l) ? H3O(aq) Cl-(aq)
  • HCl donates a proton to water. Therefore, HCl is
    an acid.
  • H2O accepts a proton from HCl. Therefore, H2O is
    a base.
  • Water can behave as either an acid or a base.
  • Amphoteric substances can behave as acids and
    bases.

8
Conjugated Acids and Bases
  • Whatever is left of the acid after the proton is
    donated is called its conjugate base.
  • Similarly, whatever remains of the base after it
    accepts a proton is called a conjugate acid.
  • Consider
  • After HA (acid) loses its proton it is converted
    into A- (base). Therefore HA and A- are
    conjugate acid-base pairs.
  • After H2O (base) gains a proton it is converted
    into H3O (acid). Therefore, H2O and H3O are
    conjugate acid-base pairs.
  • Conjugate acid-base pairs differ by only one
    proton.

9
Class Practice Problem
  • What is the conjugated base of each of the
    following acids in water (a) HClO4 H2S PH4
    HCO3-
  • What is the conjugated acid of each of the
    following bases in water (b) CN- SO4-2 H2O
    HCO3-

10
Strengths of Acids and Bases
  • The stronger the acid, the weaker the conjugate
    base the stronger the base, the weaker the
    conjugated acid.
  • H is the strongest acid that can exist in
    equilibrium in an aqueous solution.
  • OH- is the strongest base that can exist in
    equilibrium in an aqueous solution.

11
Acids and Bases
12
Predicting Direction of Equilibrium
  • Acid-base strengths allow us to predict in which
    direction equilibrium will lie (i.e., to the left
    or right)
  • Example problem
  • Predict whether the equilibrium lies to the left
    or right for the reaction in sample exercise 16.3
    using the previous table.

13
The Autoionization of Water
  • In pure water the following equilibrium is
    established
  • at 25 ?C
  • The above is called the autoionization of water.

14
Class Practice Problem
  • Calculate the value of H and OH- in a
    neutral solution at 25 oC.
  • Indicate whether solutions with each of the
    following ion concentrations is neutral, acidic,
    or basic. (a) H 4 x 10-9 M (b) OH- 1 x
    10-7 M (c ) OH- 7 x 10-13 M.
  • Calculate the concentration of H(aq) in (a) a
    solution in which OH- is 0.010 M (b) a
    solution in which OH- is 1.8 x 10-9 M.

15
Expressing pH amd pOH
  • In most solutions H(aq) is quite small.
  • We define
  • In neutral water at 25 ?C, pH pOH 7.00.
  • In acidic solutions, H gt 1.0 ? 10-7, so pH lt
    7.00.
  • In basic solutions, H lt 1.0 ? 10-7, so pH gt
    7.00.
  • The higher the pH, the lower the pOH, the more
    basic the solution.

16
Class Practice Problem
  • Calculate the concentration of H(aq) in (a) a
    solution in which OH- is 0.010 M (b) a
    solution in which OH- is 1.8 x 10-9 M.
  • A sample of freshly pressed apple juice has a pH
    of 3.76. Calculate H.

17
The pH Scale
  • Most pH and pOH values fall between 0 and 14.
  • pH 7 implies a neutral solution exist.
  • pH gt 7 implies a basic solution exist.
  • pH lt 7 implies an acidic solution exist.
  • There are no theoretical limits on the values of
    pH or pOH. (e.g. pH of 2.0 M HCl is -0.301.)

18
(No Transcript)
19
Expressing pH amd pOH
  • Other p Scales
  • In general for a number X,
  • For example, pKw -log Kw.

20
Measuring pH
  • Most accurate method to measure pH is to use a pH
    meter.
  • However, certain dyes change color as pH changes.
    These are indicators.
  • Indicators are less precise than pH meters.
  • Many indicators do not have a sharp color change
    as a function of pH.
  • Most indicators tend to be red in more acidic
    solutions.

21
Indicators pH Range
22
Strong Acids
  • The strongest common acids are HCl, HBr, HI,
    HNO3, HClO3, HClO4, and H2SO4.
  • Strong acids are strong electrolytes.
  • All strong acids ionize completely in solution
  • HNO3(aq) H2O(l) ? H3O(aq) NO3-(aq)
  • Since H and H3O are used interchangeably, we
    write
  • HNO3(aq) ? H(aq) NO3-(aq)
  • In solutions the strong acid is usually the only
    source of H.
  • Therefore, the pH of the solution is the initial
    molarity of the monoprotic acid
  • Caution If the molarity of the acid is less than
    10-6 M, the autoionization of water needs to be
    taken into account.

23
Strong Bases
  • Most ionic hydroxides are strong bases (e.g.
    NaOH, KOH, and Ca(OH)2).
  • Strong bases are strong electrolytes and
    dissociate completely in solution.
  • The pOH (and hence pH) of a strong base is given
    by the initial molarity of the base. Be careful
    of stoichiometry.
  • In order for a hydroxide to be a base, it must be
    soluble.
  • Bases do not have to contain the OH- ion
  • O2-(aq) H2O(l) ? 2OH-(aq)
  • H-(aq) H2O(l) ? H2(g) OH-(aq)
  • N3-(aq) H2O(l) ? NH3(aq) 3OH-(aq)

24
Class Example Problems
  • What is the pH of a 0.040 M solution of HCl?
  • pH -logH
  • An aqueous solution of HNO3 has a pH of 2.34.
    What is the concentration of the acid?
  • Antilog (- pH) Antilog logH
  • What is the pH of a 0.028 M solution of NaOH?
  • This can be solved to ways.

25
Weak Acids
  • Most acidic substances or weak acids
  • Weak acids are only partially ionized in
    solution.
  • There is a mixture of ions and unionized acid in
    solution.
  • Therefore, weak acids are in equilibrium

interchangeable
26
Weak Acids
  • Ka is the acid dissociation constant.
  • Note H2O is omitted from the Ka expression.
    (H2O is a pure liquid.)
  • The larger the Ka the stronger the acid (i.e. the
    more ions are present at equilibrium relative to
    unionized molecules).
  • If Ka gtgt 1, then the acid is completely ionized
    and the acid is a strong acid.
  • See Table 16.2 (example Ka values typically less
    than 10-3).

27
Calculating Ka from pH
  • Weak acids are simply equilibrium calculations.
  • The pH gives the equilibrium concentration of H.
  • Using Ka, the concentration of H (and hence the
    pH) can be calculated.
  • Write the balanced chemical equation clearly
    showing the equilibrium.
  • Write the equilibrium expression. Find the value
    for Ka.
  • Write down the initial and equilibrium
    concentrations for everything except pure water.
    We usually assume that the change in
    concentration of H is x.
  • Substitute into the equilibrium constant
    expression and solve. Remember to turn x into pH
    if necessary.

28
Percent Acid Ionization
  • Percent ionization is another method to assess
    acid strength.
  • For the reaction

29
Ionization of Weak Acids
  • Percent ionization relates the equilibrium H
    concentration, Heqm, to the initial HA
    concentration, HA0.
  • The higher percent ionization, the stronger the
    acid.
  • Percent ionization of a weak acid decreases as
    the molarity of the solution increases.
  • For acetic acid, 0.05 M solution is 2.0 ionized
    whereas a 0.15 M solution is 1.0 ionized.

30
Class Example Problems
  • A student prepared a 0.10 M solution of formic
    acid (HCHO2) and measured its pH using a pH meter
    of the type illustrated in Figure 16.6. The pH
    at 25 oC was found to be 2.38. (a) Calculate Ka
    for formic acid at this temperature. (b) What
    percentage of the acid is ionized in this 0.10 M
    solution?
  • (c) Know calculate the same problem only knowing
    the Ka value (1.8 x 10-4) and the initial
    concentration, 0.30 M, of acid (HCHO2) at 25 oC.
    (d) Calculate the pH.

31
Weak Acids (Polyprotic)
  • Polyprotic acids have more than one ionizable
    proton.
  • The protons are removed in steps not all at once
  • It is always easier to remove the first proton in
    a polyprotic acid than the second.
  • Therefore, Ka1 gt Ka2 gt Ka3 etc.

32
Example of Polyprotic Acids
33
Weak Bases
  • Weak bases remove protons from substances.
  • There is an equilibrium between the base and the
    resulting ions
  • Example
  • The base dissociation constant, Kb, is defined as

34
Types of Weak Bases
  • Bases generally have lone pairs or negative
    charges in order to attack protons.
  • Most neutral weak bases contain nitrogen.
  • Amines are related to ammonia and have one or
    more N-H bonds replaced with N-C bonds (e.g.,
    CH3NH2 is methylamine).
  • Anions of weak acids are also weak bases.
    Example ClO- is the conjugate base of HOCl (weak
    acid)

35
Relationship Between Ka and Kb
  • We need to quantify the relationship between
    strength of acid and conjugate base.
  • When two reactions are added to give a third, the
    equilibrium constant for the third reaction is
    the product of the equilibrium constants for the
    first two
  • Reaction 1 reaction 2 reaction 3
  • has

36
Conjugate acid-base Ka and Kb
  • For a conjugate acid-base pair
  • Therefore, the larger the Ka, the smaller the Kb.
    That is, the stronger the acid, the weaker the
    conjugate base.
  • Taking negative logarithms
  • at 25 oC

37
Acid-Base Properties of Salt Solutions
  • Nearly all salts are strong electrolytes.
  • Therefore, salts exist entirely of ions in
    solution.
  • Acid-base properties of salts are a consequence
    of the reaction of their ions in solution.
  • The reaction in which ions produce H or OH- in
    water is called hydrolysis.
  • Anions from weak acids are basic.
  • Anions from strong acids are neutral.

38
Anions Ability to React with Water
  • Anions, A-, can be considered conjugate bases
    from acids, HA.
  • For A- comes from a strong acid, then it is
    neutral.
  • If A- comes from a weak acid, then
  • The pH of the solution can be calculated using
    equilibrium!

A-
HA
39
Cations Ability to React with Water
  • Polyatomic cations with ionizable protons can be
    considered conjugate acids of weak bases.
  • Some metal ions react in solution to lower pH.

40
Effect of Cation and Anion in Solution
  • Anions from strong acids have no acid-base
    properties.
  • Anions that are the conjugated bases of weak
    acids will cause an increase in the pH of the
    solution.
  • A cation that is the conjugate acid of a weak
    base will cause a decrease in the pH of the
    solution.
  • Metal ions will cause a decrease in pH except for
    the alkali metals and alkaline earth metals.
  • When a solution contains both cations and anions
    from weak acids and bases, use Ka and Kb to
    determine the final pH of the solution.

41
Factors that effect Acid Strengths
  • Consider H-A. For this substance to be an acid
    we need
  • H-A bond to be polar with H? and A?- (if A is a
    metal then the bond polarity is H?-, A? and the
    substance is a base),
  • the H-A bond must be weak enough to be broken,
  • the conjugate base, A-, must be stable.

42
Other Acid Groups (Carboxylic Acids)
  • Carboxylic acids all contain the COOH group.
  • All carboxylic acids are weak acids.
  • When the carboxylic acid loses a proton, it
    generate the carboxylate anion, COO-.

43
Lewis Acids and Bases
  • Brønsted-Lowry acid is a proton donor.
  • Focusing on electrons a Brønsted-Lowry acid can
    be considered as an electron pair acceptor.
  • Lewis acid electron pair acceptor.
  • Lewis base electron pair donor.
  • Note Lewis acids and bases do not need to
    contain protons.
  • Therefore, the Lewis definition is the most
    general definition of acids and bases.

44
Lewis Acids and Bases Cont.
  • Lewis acids generally have an incomplete octet
    (e.g. BF3).
  • Transition metal ions are generally Lewis acids.
  • Lewis acids must have a vacant orbital (into
    which the electron pairs can be donated).
  • Compounds with p-bonds can act as Lewis acids
  • H2O(l) CO2(g) ? H2CO3(aq)

45
Hydrolysis of Metal Ions
  • Metal ions are positively charged and attract
    water molecules (via the lone pairs on O).
  • The higher the charge, the smaller the metal ion
    and the stronger the M-OH2 interaction.
  • Hydrated metal ions act as acids
  • The pH increases as the size of the ion increases
    (e.g. Ca2 vs. Zn2) and as the charge increases
    (Na vs. Ca2 and Zn2 vs. Al3).

46
Hydrolysis of Metal Ions Schematic
47
End of Chapter 16Acid-Base Equilibria
Write a Comment
User Comments (0)
About PowerShow.com