NOTIFIER - PowerPoint PPT Presentation

About This Presentation
Title:

NOTIFIER

Description:

Honeywell approved template with minimum user hints and tips – PowerPoint PPT presentation

Number of Views:2428
Avg rating:3.0/5.0
Slides: 30
Provided by: dbot58
Category:

less

Transcript and Presenter's Notes

Title: NOTIFIER


1
NOTIFIER
  • IP Communicators
  • The Modern Age of Central Station Reporting

2
Agenda
Agenda
  • An Overview of IP for Monitoring
  • IP Solutions
  • Code Compliance 
  • Compatible Fire Alarm Systems
  • Summary

3
An Overview of IP for Monitoring
  • IP Fire Alarm Monitoring
  • Secure, reliable fire alarm communications method
    using IP network
  • Viable choice for those experiencing POTS
    communications troubles
  • Telco providers are multiplexing to save cost
  • Analog lines going away!
  • Reduces or eliminates monthly cost of analog
    phone lines to the end user
  • Compatible to VoIP routers and VoIP provider
    networks
  • Connection Supervision increased from once every
    24 hours to once every 90 seconds

4
An Overview of IP for Monitoring
  • Why IP? Why now?
  • Current TCP/IP networks are mature, robust and
    reliable
  • Mission-critical services (bank and stock
    transactions, retail, etc) rely on IP, why not
    Fire Alarm?
  • Traditional telephone systems removed in favor of
    VoIP
  • Increases efficiency of alarm transmission
  • Always on - No need for call setup
  • High transmission speeds - Alarm is transmitted
    in seconds
  • Internet access is shared - No need to pay for
    an extra IP line
  • At the customer location
  • Many lines at the Alarm Receiving Center (ARC)

5
An Overview of IP for Monitoring
  • Faster alarm transmission
  • Means help arrives faster
  • Full Contact ID reporting to pinpoint trouble
    fast
  • Always on - No need for call setup
  • High transmission speeds - Alarm is transmitted
    in seconds
  • Internet access is shared - No need to pay for
    an extra IP line
  • At the customer location
  • Many lines at the Alarm Receiving Center (ARC)

6
An Overview of IP for Monitoring
  • Telco Dialer Model
  • Transmission can take gt1 minute end-to-end
  • Monitoring stations usually pay for 800 numbers
    (or even local calls) for the panels to dial in
  • Cost passed to end users in fees typically on a
    per call basis
  • Comm failures are not detected by the monitoring
    station until a 24 hour test signal is lost
  • Not compatible with VoIP scenarios

7
An Overview of IP for Monitoring
  • Easy to install
  • Fits right inside or right beside the panel
  • Fast programming and simple interfaces
  • Can set up at the office and transport to the job
    site
  • Programs via laptop/desktop
  • It answers any phone number dialed by the panel
    so no panel changes required

8
An Overview of IP for Monitoring
  • None of the private radio network problems
  • Large investment for a capable radio network
  • Best in metro/city where accounts are close
  • At network fringe, finding multiple paths
    difficult
  • Panel is relying on the integrity of the accounts
    around them to relay messages.
  • Some radio systems use the Fire panel printer
    output as the connection means.
  • Printer output is not expected in the critical
    alarm communications path
  • Software updates may alter Printer output

9
An Overview of IP for Monitoring
  • This is a business building opportunity for
    installers
  • The savings in phone line charges will pay for
    the installation
  • Its a source of new work for installers

10
IP Solutions - IP Communicator
  • The IP communicator module allows NOTIFIER panels
    to use a customers existing IP network as a
    communication path to transmit alarms
  • It offers performance, functionality
    enhancements, and cost savings to traditional
    digital dialer communicators

11
IP Solutions - IP Communicator
  • Full bi-directional access to the alarm panel
    over the internet
  • No third party access to information (latest 512
    bit encryption)
  • No geographic limitations (UD operator can be
    anywhere)
  • Supervision is outstanding every 90 seconds
  • Works with any fire panel
  • Remote Diagnostics allows troubleshooting from
    any connected PC

12
IP Solutions - IP Communicator
IPDACT-2 IPDACT-2UD
12
13
IP Solutions VisorAlarm Receiver
  • Central station Teldat IP receiver
  • Top quality turn key IP solution with Teldats
    experience and expertise
  • Plug and play with any automation software
  • UL listed for fire and security
  • Emulates existing popular receivers

14
IP Solutions VisorAlarm Receiver
  • The IP receivers are synchronized to each other
    for immediate backup turnover
  • Subscriber data is stored/backed up to a smart
    card
  • Allows a replacement to be put back into service
    within 30 seconds
  • IP Receivers are very robust not a patch to
    existing telephone receivers but designed
    specifically for IP alarm monitoring

15
IP Solutions VisorAlarm Receiver
Serial port 2
Alarm printer
Ethernet port
Internet
Automation Server
Serial port 1
  • Teldat IP receiver emulates a conventional phone
    receiver
  • Ademco 685
  • Radionics 6500
  • Surgard MLR2000 / MLR2D
  • Serves IP Alarms generated by Contact-ID Alarm
    Panels
  • Supervises the IP Link to each registered account
  • Supports Upload / Download over IP (to select
    FACPs)

16
IP Solutions System Integrity
  • Provision for disaster recovery
  • Based on the architecture of IP receivers, remote
    duplicate receivers can be located anywhere!
  • If a site is brought down for any reason, (fire,
    flood, etc.) a remote site can provide immediate
    switch over
  • IP receivers permit duplicate monitoring for
    troubles by an end user or alarm dealer for
    better service to end user subscribers

17
IP Solutions - Secure Access
  • Confidentiality
  • All exchanged IP traffic is encrypted in AES-512
  • Meets and exceeds SIA IP specification-512 bit
    Advanced Encryption Standard (AES)
  • Anti-replay protection, man-in-the-middle
    protection
  • The VisorALARM only serves registered IP
    Communicators
  • The registration process is password protected
  • IP Communicator programming access is password
    protected
  • The VisorALARM programming is user and password
    protected
  • Three user access levels
  • Anti-device substitution
  • IP Communicator registers into the VisorALARM
    during installation with unique and non-writable
    information

18
IP Solutions Central Station Application
Alarm L1D005
FACP with DACT
Contact ID
IP Receiver
IP Router
EIA-232
IP Communicator
Smoke Alarm 2nd Fl. Hallway Acct 4321 XYZ
Co. 555 Main St
World Wide Web
IP Router
Customer Network
19
IP Solutions Proprietary System Application
Alarm L1D005
FACP with DACT
Contact ID
IP Receiver
IP Router
EIA-232
IP Communicator
World Wide Web
IP Router
Customer Network
20
Code Compliance - NFPA
  • IP Communicator meets all requirements for a
    single communication line
  • Allowed by NFPA72-2007
  • Under 8.6.4 Other Communications Technologies
  • Allowed by NFPA72-2010
  • Under 26.6.2.2 Alternative Methods
  • No redundant path required
  • Alarm transmission meets the 500 sec reporting
    requirement
  • Instant reporting of connection loss
  • Keep alive polling increases line security from
    once every 24 hours to once every 90 seconds

21
Code Compliance - UL
  • UL 864 listing of IP Communicator meets the
    requirements in NFPA 72 for Internet/Intranet
    fire alarm communications
  • Permits the IP Communicator to operate on a
    single communications line to a central station
    equipped with UL 864 listed VISORALARM-PLUS IP
    receivers
  • Without requirement for a backup/redundant
    communications line
  • For UL listing found on the UL web site
  • http//database.ul.com/cgi-bin/XYV/template/LISEXT
    /1FRAME/index.htm

22
Compatible Fire Alarm Systems
  • IPDACT is UL 864 Ninth Edition Listed with the
    following panels
  • NFS-320
  • NFS2-640
  • NFS2-3030
  • NCA-2
  • NFW-50
  • NFW2-100
  • SFP-5UD
  • SFP-10UD
  • 411UDAC/411UD
  • Requires the IPDACT-2

23
Compatible Fire Alarm Systems
  • IPDACT can be used with the following panels in
    retrofit applications
  • NFS-3030
  • NFS-640
  • NCA
  • AFP1010/AM2020
  • AFP-300/400
  • AFP-200
  • AFP-100
  • System 5000
  • System 500
  • SFP-1024
  • Requires the IPDACT-2

24
Non-NOTIFIER Panel Monitoring
  • The 411, 411UD or 411UDAC dialers are UL listed
    for use with the IP Communicator
  • The 411 series dry contact inputs are connected
    to the Alarm, Trouble, and Supervisory relay
    outputs of any panel
  • The IPDACT connects to PH-1,PH-2 outputs of the
    411 series products

25
Central Stations that Support IP Comm.
  • Affiliated Central
  • Alarm Tech Central Service
  • AlarmWatch
  • AmerX Security
  • Bay Alarm
  • Blue Ridge Security Systems
  • C.O.P.S Monitoring
  • Devcon Security Services
  • Emergency Systems Inc. (ESI)
  • EMERgency24
  • ESC Central
  • Monitoring Center (NMC)
  • Rapid Response
  • Security Central
  • Southwest Dispatch Center
  • United Central Control (UCC)
  • USA Central Station

26
IP Communicator Summary
  • Saves high cost of phone lines and meets NFPA
    requirements
  • Higher line security (every 90 seconds vs. once a
    day)
  • Provides non-hackable security via 512 bit AES
    encryption
  • Supports either static IP or dynamic IP
  • Optional, simultaneous dual alarm monitoring at
    end users location using maintenance receiver
  • Easy to program and uses customers existing
    shared network equipment

27
Questions?
  • Please submit your questions by typing them into
    the questions box on the right side of your
    screen

28
Thank you! A recording of todays webinar will
be posted on www.magni-fire.com
29
www.honeywell.com
Write a Comment
User Comments (0)
About PowerShow.com