Hydraulic Crane Safety - PowerPoint PPT Presentation

1 / 13
About This Presentation
Title:

Hydraulic Crane Safety

Description:

Operators consist of 13% of all victims in crane related fatalities ... Minimum clearance between the lines and any part of the crane or load shall be 10 feet ... – PowerPoint PPT presentation

Number of Views:5922
Avg rating:3.0/5.0
Slides: 14
Provided by: hin3
Category:

less

Transcript and Presenter's Notes

Title: Hydraulic Crane Safety


1
Hydraulic CraneSafety
2
Hydraulic Cranes
  • Can be stationary or attached to trucks, trains
    and boats
  • Lift capacities in excess of 1,000 tons

3
Hydraulic Cranes
  • Cranes represent the largest cause of injury in
    construction today
  • Consider the following accident statistics

4
Hydraulic Cranes
  • Cranes contribute to as many as one third of all
    construction and maintenance fatalities and
    injuries resulting in permanent disabilities
  • 1.4 deaths per 1,000 operators over the past 45
    years
  • Operators consist of 13 of all victims in crane
    related fatalities
  • From 1980-1992 cranes are associated with 306
    construction fatalities (16.1 of all
    construction fatalities

5
  • 1996 OSHA study of 502 crane related fatalities
    identified causes of death as
  • Electrocution (39)
  • Crane assembly/dismantling (12)
  • Boom buckling/collapse (8)
  • Crane upset/overturn (7)
  • Rigging failure (7)
  • Other (27)

6
OSHA Standards1926.550
  • A thorough, annual inspection of the hoisting
    machinery shall be made by a competent person
  • All employees shall be kept clear of loads about
    to be lifted and suspended loads

7
Power Lines
  • Minimum clearance between the lines and any part
    of the crane or load shall be 10 feet
  • Add 0.4 inches for each 1 kV over 50 kV

8
Crane Signals
  • Hand signals to crane and derrick operators shall
    be those prescribed by the applicable ANSI
    standard for the type of crane in use
  • An illustration of the signals shall be posted at
    the job site

9
Crane Signals
10
Inspection Items
  • Operating Manual
  • Machine Guarding
  • Swing Clearance Protection
  • High Voltage Warnings
  • Boom/Jib Boom Stops
  • Boom Angle Locator
  • Boom Hoist Disconnects
  • Anti-Two Block Devices
  • Power Controlled Lowering
  • Leveling Indicator Devices

11
Inspection Items
  • Sheaves
  • Main Hoist and Auxiliary Drums
  • Main Boom/Jib Boom Extensions
  • Hooks/Hook Block
  • Hydraulics
  • Outriggers
  • Load Rating Chart
  • Wire Rope
  • Cab

12
Hydraulic Cranes
  • Careful consideration must be used when planning
    a lift
  • Identify potential hazards inside the cranes
    radius
  • Make sure hoists/slings are secured
  • The operator should be able to see the spotter
    throughout the entire lift

13
Hydraulic CraneSafety
Write a Comment
User Comments (0)
About PowerShow.com