Demolition 29 CFR 1926, Subpart T

1
Demolition29 CFR 1926, Subpart T
2
Overview of the OSHA regulation

• Preparations
• Pre-job survey
• By competent person
• Determine structural integrity
• Have evidence in writing

1a
3
Overview of the OSHA regulation

• Preparations
• All utilities shut off
• Needed utilities relocated to temporary hook-up
• Identify hazards guard (glass)
• Cover all floor openings not to be used

1a
4
Stairs, Passageways, Ladders

• Close those not to be used
• Maintain only those for access
• Proper illumination needed

2a
5
Chutes

• No dropping of materials outside the building w/o
  protection (chute)
• Totally enclose chutes 45 degrees greater
• End of chute guarded

2b
6
Masonry Removal

• Do not overload floors with materials from other
  floors or components
• Totally enclose chutes 45 degrees greater
• Safe access to scaffolds walkways required

2b
7
Floor Removal

• Provide adequate work surfaces for employees
• Minimum 2X10 (undressed) planks
• Openings less than 16

3a
8
Using Equipment for Removal

• Check structures ability to support load
• Provide curbs to prevent driving over edge
• Meet all aspects of Subparts N O

3b
9
Storage

• Debris on floors must not exceed allowable floor
  loads

3c
10
Mechanical Demolition

• Keep employees out of work area
• Remove heavy building attachments prior to demo
• Cut steel prior to pulling over
• Competent person must oversee job

3d