Title: Unit 1: Mix and Flow of Matter
1Unit 1 Mix and Flow of Matter
2WHMIS
- WHMIS Workplace Hazardous Materials Information
System
3Topic 1 The States of Matter
- Solid has definite shape and volume
- Particles in a solid are tightly packed together.
The cannot move around freely, they can only
vibrate. - Examples??
4Continued
- Liquid has a definite volume but no definite
shape. - Particles in a liquid have enough energy to slide
past one another while they vibrate together in
clusters. - Examples??
5Continued
- Gas has no definite shape or volume
- Enormous amounts of empty space between
particles, they, like liquids will take the shape
of their container. - Examples??
6Continued
- Plasma Makes up approximately 98 of the
universe, however there is very little on earth.
- Plasma is a gas-like mixture of positively and
negatively charged particles. - Examples lightning, auroras, neon signs
7Particle Model of Matter
- The Five Main Points
- All substances are made of matter
- All particles in a pure substance are the same.
Different pure substances are made of different
particles. - Particles are always in motion. The speed of the
particles increases when temperature increases. - Particles have space between them
- There are attractive forces between particles
8Changes of State
9Topic 2 Mixing and Dissolving
10Pure Substances
- All pure substances contain only one type of
particle. - They can exist in three states of matter solid,
liquid and gas. - Examples of Elements??
- Examples of Compounds??
11Mixtures
- Mixtures contain two or more pure substances
- Homogeneous Mixtures Look as though they only
have one substance. - E.g. Kool-aid, Hot chocolate
- A homogeneous mixture where no settling occurs is
called a solution
12Mixtures Continued
- Heterogeneous Mixtures Mixtures that contain two
or more parts that are still visible. - Examples??
13Mixtures Continued
- In-Between Mixtures
- Suspension A heterogeneous mixture in which the
particles settle slowly. E.g. salad dressing - Colloid A heterogeneous mixture in which the
particles do not settle. E.g. Smoke, dust - Emulsion A mixture in which droplets of fat are
prevented from joining together by an emulsifying
agent. E.g. Mayonnaise
14Dissolving
- Dissolving The complete intermingling of the
particles of two or more substances. - Solute The substance that dissolves in the
solvent to form a solution. There is usually less
solute than solvent in a solution. - Solvent The substance that dissolves a solute to
form a solution. There is usually more solvent
than solute. - You dissolve salt in water. Which is the solute??
Which is the solvent??
15Continued
- Soluble means able to dissolve in a particular
solvent - Insoluble means unable to dissolve in a
particular solvent - Give an example of a substance that is soluble in
water? - Give an example of a substance that is insoluble
in water?
16Factors That Affect Dissolving
- Agitation
- Solute Size
- Temperature
- Pressure
- Why do you think these factors can affect
dissolving?
17Solubility
- Solubility The mass of a solute that can
dissolve in a given amount of solvent to form a
saturated solution at a given temperature. - How much can be dissolved??
- Saturated No more solute will dissolve in a
specific amount of solvent at a specific
temperature. - Supersaturated A solution that contains more
solute than would normally dissolve at a certain
temperature.
18Continued
Substance Solubility (g/100g Water) at Solubility (g/100g Water) at Solubility (g/100g Water) at Solubility (g/100g Water) at Solubility (g/100g Water) at Solubility (g/100g Water) at
Substance 0oC 20oC 40oC 60oC 80oC 100oC
Copper Sulfate 15 20 30 40 55 79
Lithium Sulfate 35 35 33 31 30 29
Ammonium Chloride 30 38 45 55 65 78
- Which substance has the greatest solubility at
80oC? - Which solution is saturated at 60oC, with 40g
dissolved in 100g of water? - Mr. Chin wants to add 2g of Copper sulfate to a
solution that already contains 14g of copper
sulfate/ 100 g of water at 0oC. What will happen??
19Solubility
20Topic 3 Viscosity Density
- Viscosity How thick or thin a liquid is. A thick
liquid is more viscous and has a higher
viscosity. - Give examples of liquids with high viscosity.
- Give examples of liquids with low viscosity.
- Flow Rate The time it takes for a liquid to flow
from one point to another.
21The Effect of Temperature on Viscosity of Liquids
- Warmer liquids flow quickly
- Cooler liquids flow slowly
- Examples??
- ThereforeThe viscosity of a liquid _________ as
it is heated and _________ as it is cooled.
22The Effect of Temperature on Viscosity of Gases
- Hotter air particles have more collisions than
cooler ones. - More collisions would cause them to move
- Therefore The viscosity of a gas _________ as it
is heated, and _________ as it is cooled.
23Density
- Density Mass per unit volume of a substance.
Particle Crowdedness - Mass The amount of matter in a substance
(particles) - Volume Measurement of the space taken up by a
substance - Weight Force of gravity on an object
- Force A stress such as a push or pull
- What is the difference between weight and mass????
24Formula for Density
- Density Mass Volume
- D M/V
- 1. Concentrated sugar could have a mass of 10g
and take up a volume of 2cm3. So the density
would be - D M/V
- ???
25Density of Materials
- In general, gases are less dense than liquids and
liquids are less dense than solids of the same
substance. - Explain
- Does that mean all solids are more dense than all
liquids? - Can you think of any exceptions? How do you know??
26Ice Crystals
27Density
Fluid Density (g/ml) Solid Density (g/cm3)
water 1.00 Cork 0.24
seawater 1.03 Oak 0.70
mercury 13.55 Sugar 1.59
- Which fluid has the lowest density?
- Which fluid has the highest density?
- Which solid would sink in seawater?
- Which solid would sink in mercury?
28Buoyancy
- Buoyancy is the tendency for materials to rise
or float in fluid. It is the ability of a fluid
to support an object floating in or on the fluid. - Average Density The total mass of all substances
on board divided by total volume. - Even steel ships can float provided they have a
hollow hull. - It can be used to help floating objects sink too.
A fish bladder enables a fish to increase or
decrease their density by adding or removing air.
29Average Density
- Using the principle of Average Density explain
how a Hot Air Balloon works
30Changes in Buoyancy
- Why is it so much easier to float in the Dead Sea
than in any other ocean?
31Archimedes Principle
- Archimedes was a Greek scientist around 212 BC.
- Archimedes Principle The buoyant force acting on
an object equals the weight (force of gravity) of
the fluid displaced by the object! - What does that mean??
32Archimedes Principle
- Archimedes. Principle
- - states that the buoyant force acting on an
object equals the weight (force of gravity) of
the fluid displaced by the object. - - used his own body (which displaced water in the
bathtub) to prove the kings goldsmith was
cheating the king - - the buoyant force does not depend on the weight
of the submerged - object, but rather on the weight of the displaced
fluid
33Neutral Buoyancy
- If the water in a container is still, or at rest,
then the water particles are neither rising nor
sinking. An object immersed in a fluid such as
water does not rise or sink if the amount of
force pulling down (gravity) equals the amount of
force pushing up (buoyancy). - When gravity buoyancy its called neutral
buoyancy.
34Question??
- Why do you sink the bathtub but float in the
ocean??
35Pressure
- Pressure Force Area
- P F/A
- Force is measured in Newtons and area is usually
measured in m2. The unit for pressure therefore
is N/m2. This is also called a Pascal (Pa) for
the man who invented it. - A kilopascal equals???
36Applications of Pressure
- Water hoses
- Fire extinguishers
- High heels!
- Cushioning materials
- All-terrain vehicles
- Other examples???
37Compression of a Gas
- The gas must be enclosed in a sealed container
with sturdy walls - There is so much space between particles that
even if they are squeezed together they will
still behave as a gas - An external or outside force is applied to the
enclosed gas to push the particles closer
together. - The great thing about applying force to a
compressed gas is that there is a counter force
which acts as a cushion. This is used in shocks
and airbags in a car.
38Balanced and Unbalanced Forces
- The Earths atmosphere is 160km thick and is held
to the earth by gravity. The pressure of the
weight of all that air is called atmospheric
pressure. When you change altitude, you often
feel a pop in your ear this is the pressure
equalizing on either side of your eardrum. - Balanced and Unbalanced Forces In a Container
- Too much force inside, not enough outside
EXPLOSION - Too much force outside, not enough inside
IMPLOSION
39Technologies based on Solubility
- Separation Methods
- Desalination Water is separated from a solvent
via evaporation. The solvent (water) is recovered
but the solute isnt necessarily. - Distillation Boiling water allows it to be
separated from a mixture and have each collected
in different containers, leaving a distillate
(water) and residue.
40More Separation Methods
- Filtering Materials are screened out leaving a
filtrate and residue. - Underground Solids Material is crushed and
dissolved, waste material is removed via a system
of filters and the wanted mineral is left behind.
- E.g. Gold
41Other Technologies
- Convenience foods are often dehydrated, so they
can be stored for long periods of time without
spoiling (you just add water when you want to use
it)
42Technologies Based on Viscosity and Flow Rate
- Lipstick solvents, oils and waxes are mixed in
such a way that their viscosity is increased so
lipstick is solid. - Gravy
- Paint
- Other examples???
43Technologies for Moving Fluids
- Hydraulic Systems Are devices that apply
force/pressure to a liquid to move something
else. E.g. water pump, oil and gas pipeline - Pneumatic Systems Are similar to hydraulic
systems except gases are used instead of liquids.
E.g. Dentist drill, jack hammer - Compressor A device that compresses air