WindO/I-NV2 version 4.62 (AO v1.82)

1
WindO/I-NV2 version 4.62(AO v1.82)

• New Features
• 10/19/2012

2
Overview

• Support New Drivers/Protocols
• New Recording Functions
• Other Improvements
• Visible / Invisible of functional parts or
  objects
• Alarm Log (increased number of blocks)
• Change Target PLC IP Address on OI Touchscreen
• Increased Refreshing time of web page (Execution
  time)
• User Communication via Ethernet
• Conversion Update
• Message Alert is added when selecting USB for
  communication using HG2G-5ST.

3
New Protocols

• Emerson FloBoss 107 Series
• ROC Protocol
• Mainly for US market
• Emerson FloBoss 107 controllers are widely used
  in Oil and Gas industries
• Applicable to the following OI Touchscreen
• 5.7 HG2G-5S/-S HG2G-5FT22TF
• 8.4 10.4 HG3G Series
• 12.1 HG4G Series
• YASKAWA MP2000 Series (Ethernet)
• Fuji MICREX-SX (Serial / Ethernet)

4
Recording Functions

• Video and Audio can be recorded
• Event Trigger Recording
• Max. 30 seconds
• 15 seconds before
• and after
• It functions globally
• REC button/command
• Max. 30 seconds
• Must be triggered on that specific screen where
  button/command placed

5
Improvements

• Visible/Invisible Parts
• This is supported by most of functional Parts.
• Part can be shown or not shown base on Visible
  Condition configure in Part Properties
• Applicable to High-Performance OI Touchscreen only

6
Improvements

• Alarm Log
• Increased the number of blocks from 64 to 128
  (for Word device only).
• Data Storage Area Management (for Alarm Log)
• Basic Series HG2G-S/5S 5520 points (maximum
  amount of data storage area)
• High Performance Series HG2G-5FT22TF, HG3G/HG4G
  11,660 points

7
Improvements

• Host Interface IP address can be changed via OI
  Touchscreen
• Current limitation
• Host Interface IP address needs to be configured
  using WindO/I-NV2 software
• Using OI Touchscreen System Mode, host interface
  IP address can be changed
• Applicable to
• HG2G-S/-5ST/-5FT, HG3G, and HG4G
• All PLCs with Ethernet 1N communication driver

8
Improvements

• How to change Host Interface IP Address
• Press and hold top-left corner for 3 or more
  seconds
• Press System Mode ? Offline
• Press Initial Setting ? Communication I/F ? Host
  IP Address
• Enter Station No. and press the ENT key
• Change the IP Address and press the ENT key
• Press SAVE button

9
Improvements

• Web Page Refreshing Time
• Current Limitation
• Web page is refreshed constantly
• This creates problem for customers who use our OI
  Touchscreen with cellular modem where data is
  being consumed
• Users now can set the refreshing rate
• Max. of 5 seconds (5000ms) can be set

10
Improvements

• Enhancement of User Communication
• Support User Communications using Ethernet
  interface
• Conversion Update
• If Zooming Conversion is selected, it will
  automatically adjust the registered text and
  coordinates of the screens (i.e. Overlay Screens,
  Goto Screen Buttons)

11
Improvements

• Warning Dialog when selecting USB for
  communication with HG2G-5ST models