Title: 7th Grade Science Midterm Review
17th Grade ScienceMidterm Review
2What is science?
- Science is the study of the natural world.
- Science is divided up into three areas
- Biology/Life science
- Geology/Earth science
- Physics/Physical science
3What is empirical evidence?
- The observations, measurements, and other types
of data that people gather and test to support
and evaluate scientific explanations.
4What is a theory?
- The explanation for some phenomenon that is based
on observation, experimentation, and reasoning
that is supported by a large quantity of
evidence and that does not conflict with any
existing experimental results or observations.
5What is a law?
- A descriptive statement or equation that reliably
predicts events under certain conditions.
6What is the difference between a theory and a law?
- Theory is an explanation for why something is the
way it is and law describes what is happening in
the natural world.
7Where do scientists get their evidence?
- In the field
- In the laboratory
8How do scientific ideas change?
- By new evidence
- By collaboration and debate
9What is an experiment?
- An organized procedure to study something under
controlled conditions.
10What is an observation?
- The process of obtaining information by using the
senses the information obtained by using the
senses.
11What is a hypothesis?
- A testable idea or explanation that leads to
scientific investigation
12What is an independent variable?
- The factor that is changed by the experimenter
13What is a dependent variable?
- The factor that changes as a result of
manipulation of one or more independent variables.
14What is data?
- Information gathered by observation or
experimentation that can be used in calculation
or reasoning
15What are the steps of the scientific method?
(Please refer to your notes and foldable)
1. Make an observation 2. Ask a question 3.
Hypothesis 4. Experimentation / collect data 5.
Results (typically represented in data tables,
graphs, mean, median, etc in middle and high
school) 6. Analyze / conclude 7. Repeat
16What is repetition? What is replication? What is
the difference between them?
- Repetition is when a scientist repeats their own
experiment - Replication is when a scientist repeats different
scientists experiment
17What characterizes a good scientific
investigation?
It needs to be able to be repeated
18How do you evaluate the quality of scientific
information?
- The most reliable scientific information is
published in peer-reviewed scientific journals.
(The information has to be peer-reviewed.)
19What is a model?
- A pattern, plan, representation, or description
designed to show the structure or workings of an
object, system, or concept
20How do scientists organize data?
- Scientists organize data in tables and then in
charts, models, and graphs.
21What are the different types of graphs and why do
we use them?
- Circle Graph- shows how each group of data
relates to all of the data - Bar Graph- Used to display and compare data in a
number of categories - Line Graph- Used to show change in variables over
time
22Unit 2 Study Guide
23What is a mineral? How are minerals formed?
- A mineral is a naturally occurring usually
inorganic solid that has a definite crystalline
structure and chemical composition. - Minerals are formed
- As magma and lava cool
- By metamorphism
- From solutions
24What is an element?
- Elements are pure substances that cannot be
broken down into simpler substances by ordinary
chemical means
25What is a compound?
- A substance made up of atoms or ions of two or
more different elements joined by chemical bonds.
26What is the difference between silicate and
nonsilicate minerals?
- Silicate minerals contain silicon and oxygen,
normally in the form of silicate tetrahedrons. - Nonsilicate minerals do not.
27What are the different properties that can be
used to identify minerals? Define each property.
- Color- color of the mineral
- Streak- color of the powdered form of the
mineral. (Remember that if a scientist draws on
a white tile with the mineral, this is how the
streak is found.) - Luster- way a surface reflects light
- Cleavage and Fracture- The way the mineral
breaks/splits - Density- measure of how much matter in a given
amount of space. - Hardness- minerals resistance to being
scratched. - Special Properties- any property specific to the
mineral
28Know the three different rock types What are
they? How are they each created?
- Igneous rock forms when magma or lava cools and
hardens - Sedimentary rock forms from compressed or
cemented layers of sediment. - Metamorphic rock forms from other rocks as a
result of intense heat, pressure, or chemical
processes.
29What is weathering?
- Weathering is the natural process by which
atmospheric and environmental agents, such as
wind, rain, and temperature changes, disintegrate
and decompose rocks.
30What is erosion?
- Erosion is the process by which wind, water, ice,
or gravity moves soil and sediment from one
location to another.
31What is deposition?
- Deposition is the process in which material is
laid down.
32What is the rock cycle?
- The rock cycle is the series of processes in
which rock forms, changes from one type to
another, is destroyed, and forms again by
geologic processes. - Look in your book on page 78 for a diagram of the
rock cycle.
33What is uplift?
- Uplift is the rising of regions of Earths crust
to higher elevations.
34What is subsidence?
- Subsidence is the sinking of regions of the
Earths crust to lower elevations.
35What is a rift zone?
- A rift zone is an area of deep cracks that forms
between two tectonic plates that are pulling away
from each other.
36What are Earths compositional layers?(Make sure
you can label them)
Crust
Mantle
Core
37What is convection? Where does convection take
place in Earth and why is it important?
- Convection is the movement of matter due to
differences in density that are caused by
temperature variations can result in a transfer
of energy as heat. - Convection takes place in the Earths mantle.
- Convection helps rocks move slowing in the
mantle. (Cooler rocks sink and warmer rocks rise)
38What are the Earths physical layers?(Make sure
you can label them)
Lithosphere
Asthenosphere
Mesosphere
Outer Core
Inner Core
39What is Pangaea? Why is the idea of Pangaea
important in understanding Earths history?
- Scientists think that about 245 million years ago
the continents were joined in a single large
landmass that they call Pangaea. - Its important to understand that at one time
scientists think that all the continents were
connected and during millions of years the
continents moved into their current locations.
40What is sea-floor spreading?
- Sea-floor spreading is the process by which new
oceanic lithosphere sea floor forms when magma
rises to Earths surface at mid-ocean ridges and
solidifies, as older existing sea floor moves
away from the ridge. - Older rock- far from ridge
- Newer rock- formed near ridge
41Theory of plate tectonics
- This theory explains how large pieces of the
lithosphere, called plates, move and change shape.
42What is a tectonic plate?
- A tectonic plate is a block of lithosphere that
consists of the crust and the rigid, outermost
part of the mantle.
43Different plate boundaries(Know the arrow
diagrams!)
- Convergent- Two plates collide.
- Divergent- Two plates move away from each other
- Transform- Two plates move past each other
horizontally
44What are the three different mechanisms that
cause tectonic plates to move?
- Mantle Convection
- Ridge Push
- Slab Pull
45What is an anticline?(Look on Page 107 for a
diagram)
- Anticlines- oldest layers of rock are in the
middle of the fold. The youngest rocks are
towards the outside. - Anticlines are shaped like a n
46What is a syncline?(Look on Page 107 for a
diagram)
- In syncline folds the youngest rocks are in the
middle and the older rocks are on the outside
edges. - Synclines are shaped like a u
47Faults
- Strike-Slip Faults
- Formed when rocks are under shear stress and at
transform boundaries - Normal Faults
- Formed when rocks undergo tension and at
divergent boundaries - Reverse Faults
- Formed when rocks undergo compression and at
convergent boundaries
48Faults
- Be able to label a diagram of each fault, with
where the hanging wall, footwall and fault plane
are! (Look on page 109)
49Three types of mountains
- Folded Mountains- Form when rock layers are
squeezed together and pushed upward. - Usually at convergent boundaries
- Volcanic Mountains- Form when melted rock erupts
onto Earths surface - Fault-Block Mountains- Form when tension makes
the lithosphere break into many normal faults.
Along the faults, pieces of the lithosphere drop
down compared with other pieces. The pieces left
standing form fault-block mountains.
50What is an earthquake?
- Earthquakes are ground movements that occur when
blocks of rock in Earth move suddenly and release
energy. - Label 6 page 116 in your book.
- Know that the Focus is the point underneath the
Earth - The Fault Line is the line between both of the
plates - The Epicenter is on the Earths surface.
51Label a volcano
- Label 5 on page 126 in your book.
- Know this!
- Know magma is underneath the Earth lava is when
it has reached the Earths surface
52Three types of volcanoes
- Shield Volcanoes- Broad base, gently sloping
sides, and form from mild eruptions. - Cinder Cones- Steep volcano formed from violent
eruptions - Composite Volcanoes- Alternates between mild and
violent eruptions.
53Where do volcanoes occur?
- Divergent boundaries
- Convergent boundaries
- Hot Spots
54Unit 3 Review
- Please see pages 145-194 in your book for more
information - This study guide is just to get you started
studying please look at your notes and book too.
55What is uniformitarianism?
- A principle that geological processes that
occurred in the past can be explained by current
geologic processes.
56What is climate?
- The weather conditions in an area over a long
period of time.
57What is a fossil?
- The trace or remains of an organism that lived
long ago, most commonly preserved in sedimentary
rock.
58What is a trace fossil?
- A fossilized structure, such as a footprint or
coprolite, that formed in sedimentary rock by
animal activity on or within soft sediment.
59What is an ice core?
- A long cylinder of ice obtained from drilling
through ice caps or ice sheets used to study
past climates.
60How do organisms become preserved as fossils?
- Fossils can be trapped in amber or asphalt
- Buried in rock
- Become frozen
- Become petrified
61What can fossils tell us?
- Fossils tell scientists about changes to the
environment - Fossils tell scientist how life forms have
changed over time
62How does sedimentary rock show Earths history?
- The composition of sedimentary rock show the
source of the sediment that makes up the rock - The texture of the sedimentary rock shows the
environment in which the sediment was carried and
deposited - Features in the rock show what was happening to
the sedimentary rock
63What do Earths surface features tell us?
- How continents move
- How landforms change over time
64What other materials tell us about Earths
climate history?
- Trees
- Sea-Floor sediments
- Ice cores
65What is relative dating?
- Any method of determining whether an event or
object is older or younger than other events or
objects.
66What is superposition?
- A principle that states that younger rocks lie
above older rocks if the layers have not been
disturbed.
67What is unconformity?
- A break in the geologic record created when rock
layers are eroded or when sediment is not
deposited for a long period of time.
68What is a geologic column?
- An ordered arrangement of rock layers that is
based on the relative ages of the rocks and in
which the oldest rocks are at the bottom.
69How are undisturbed rock layers dated?
- Older layers are on the bottom
- Younger layers are on the top
70How are sedimentary rock layers disturbed?
- Tilting
- Folding
- Faults and Intrusions
- Unconformities
71How are rock layers ordered?
- Law of crosscutting relationships states that
- A fault or a body of rock, such as an intrusion,
must be younger than any feature or layer of rock
that the fault or rock body cuts through.
72How are fossils used to determine relative ages
of rocks?
- Fossils can help us determine the relative age of
rocks by giving us a reference point for the
rocks. - Younger fossils younger rocks
- Older fossils older rocks
73What is absolute dating?
- Any method of measuring the age of an event or
object in years.
74What is radioactive decay?
- The process in which a radioactive isotope tends
to break down into a stable isotope of the same
element or another element.
75What is half-life?
- The time required for half of a sample of a
radioactive isotope to break down by radioactive
decay to form a daughter isotope. - If you have 6 milligrams of the original isotope
in one half-life 3 milligrams of the isotope
would be left and 3 milligrams would be the
daughter isotope
76What is radiometric dating?
- A method of determining the absolute age of an
object by comparing the relative percentages of a
radioactive parent isotope and a stable daughter
isotope.
77How can the absolute age of rock be determined?
- Thru absolute dating methods
78What is the best rock for radiometric dating?
79What are some radiometric dating methods?
- Radiocarbon dating
- Potassium-Argon dating
- Uranium-Lead dating
80How is radiometric dating used to determine the
age of Earth?
- Radiometric dating can be done on meteorites to
determine the age of the Earth.
81How are index fossils used?
- Index fossils are markers for the time that
organisms lived on Earth - Index fossils can date different layers of Earth