Overview (2 pages max)

1
Overview (2 pages max)

• What works (Give the TA as much info as you can
  here. Special cases that work are fine. e.g. we
  got mode 1 fine. Mode 2 works if we use a big
  pixel and transmit letters with even parity, but
  only if we turn out the room lights.)
• How does your mode 2 implementation work? (the
  following is suggested format only. As long as
  you cover all of the material, organize it
  however you like)
• Frame Size (e.g. 64x128)
• When do you transmit mode 2 info? (e.g. end of
  frame, immediate, )
• When do you compute thresholds, check for falling
  edges, latch message data? (e.g. between pixels,
  at end of line, end of frame,)
• What caused the most problems?
• What are you most proud of?
• How many hours did you each spend on the project?
  (e.g. Bob 50, Bill 35)
• How was the work divided? (e.g. Sally did the
  datapath and debugged mode 1, and Tran did most
  of the controller parts that worked. We both
  worked together on debugging mode 2. Trans
  first datapath blew up the ADC, but he was a
  wizard with a Moore machine.)

2
Datapath

• Make sure to show OE, CLK, LATCH, and other
  important control signals! Ive left out lots of
  detail that you should include.

REG A
to PC
Data bus
3
Control

• Show a block diagram of the controller indicating
  all of the control signals (inputs, outputs,
  handshaking, ) No state machines please.