Electric Charge, Force, and Field - PowerPoint PPT Presentation

About This Presentation
Title:

Electric Charge, Force, and Field

Description:

Chapter 20 Electric Charge, Force, and Field Answers to Even Numbered Problems Chapter 20: Problem 14 1.6 1020 Answers to Even Numbered Problems Chapter 20 ... – PowerPoint PPT presentation

Number of Views:112
Avg rating:3.0/5.0
Slides: 37
Provided by: Brook264
Learn more at: https://personal.tcu.edu
Category:

less

Transcript and Presenter's Notes

Title: Electric Charge, Force, and Field


1
Chapter 20
  • Electric Charge, Force,and Field

2
Properties of Electric Charges
  • Two types of charges exist (named by Benjamin
    Franklin) positive and negative
  • Like charges repel and unlike charges attract one
    another
  • Natures most basic positive charges are the
    protons (held firmly in the nucleus and do not
    move from one material to another)
  • Natures most basic negative charges charge are
    the electrons an object becomes charged by
    gaining or losing electrons

3
Properties of Electric Charges
  • Electric charge is always conserved (not created,
    only exchanged) in an isolated system
  • Objects become charged because negative charge
    (electrons) is transferred from one object to
    another
  • Charge is quantized (a multiple of a fundamental
    unit of charge, e) electrons have a charge of
    e and protons have a charge of e
  • The SI unit of charge is the Coulomb (C)
  • e 1.6 x 10-19 C

4
Particle Summary
5
Coulombs Law
  • Electric force is
  • Along the line joining the two point charges
  • Inversely proportional to the square of the
    separation distance, r, between the particles
  • Proportional to the product of the magnitudes of
    the charges, q1 and q2 on the two particles
  • k 8.9875 x 109 N m2/C2 Coulomb constant
  • Attractive if the charges are of opposite signs
    and repulsive if the charges have the same signs

6
Electric Forces
  • Electric forces are vector quantities
  • Electric force on q1 is equal in magnitude and
    opposite in direction to the force on q2
  • Electric force is exerted by one object on
    another object without physical contact between
    them field force
  • The superposition principle applies resultant
    force on any one charge equals the vector sum of
    the forces exerted by the other individual
    charges that are present

7
Superposition Principle
8
Chapter 20Problem 40
  • A charge 3q is at the origin, and a charge -2q is
    on the positive x-axis at x a. Where would you
    place a third charge so it would experience no
    net electric force?

9
Electric Field
  • Electric field exists in the region of space
    around a charged object (source charge)
  • When another charged object q0 (test charge)
    enters this electric field, the field exerts an
    electric force F on the test charge
  • Electric field
  • SI units N / C

10
Electric Field
  • The field is produced by some charge or charge
    distribution, separate from the test charge
  • The existence of an electric field is a property
    of the source charge the presence of the test
    charge is not necessary for the field to exist
  • The test charge serves as a detector of the field

11
Direction of Electric Field
  • The direction of the vector of electric field is
    defined as the direction of the electric force
    that would be exerted on a small positive test
    charge placed at that point
  • The electric field produced by a negative charge
    is directed toward the charge (attraction)
  • The electric field produced by a positive charge
    is directed away from the charge (repulsion)

12
Relationship Between F and E
  • If q is positive, the force and the field are in
    the same direction if q is negative, the force
    and the field are in opposite directions
  • Coulombs law, between the source and test point
    charges, can be expressed as
  • Then

13
Superposition of Electric Fields
  • At any point P, the total electric field due to a
    group of source charges equals the vector sum of
    the electric fields of all the charges

14
Continuous Charge Distribution
  • Charge ultimately resides on individual
    particles, so that the distances between charges
    in a group of charges may be much smaller than
    the distance between the group and a point of
    interest
  • In this situation, the system of charges can be
    modeled as continuously distributed along some
    line, over some surface, or throughout some volume

15
Continuous Charge Distribution
  • Divide the charge distribution into small
    elements, each of which contains ?q
  • Calculate the electric field due to one of these
    elements at point P

16
Continuous Charge Distribution
  • Evaluate the total field by summing the
    contributions of all the charge elements

17
Charge Densities
  • Volume charge density when a charge is
    distributed throughout a volume
  • dq ? dV ? Q / V with units C/m3
  • Surface charge density when a charge is
    distributed over a surface area
  • dq s dA s Q / A with units C/m2
  • Linear charge density when a charge is
    distributed along a line
  • dq ? dl ? Q / l with units C/m

18
Charge Densities
  • Linear charge density when a charge is
    distributed along a line
  • dq ? dl ? Q / l with units C/m

19
Problem-Solving Strategy
  • Categorize (individual charge? group of
    individual charges? continuous distribution of
    charges?) and take advantage of any symmetry to
    simplify calculations
  • For a group of individual charges use the
    superposition principle, find the fields due to
    the individual charges at the point of interest
    and then add them as vectors to find the
    resultant field
  • For a continuous charge distribution a) the
    vector sums for evaluating the total electric
    field at some point must be replaced with vector
    integrals b) divide the charge distribution into
    infinitesimal pieces, calculate the vector sum by
    integrating over the entire charge distribution

20
Chapter 20Problem 46
  • A 1.0-µC charge and a charge 2.0-µC are 10 cm
    apart. Find a point where the electric field is
    zero.

21
Electric Field of a Uniform Ring of Charge
(Example 20.6)
22
Electric Field of a Uniformly Charged Disk
(Problem 71)
  • The ring has a radius R and a uniform charge
    density s
  • Choose dq as a ring of radius r
  • The ring has a surface area 2pr dr

23
Electric Field of a Uniformly Charged Disk
(Problem 71)
24
Motion of Charged Particles
  • When a charged particle is placed in an electric
    field, it experiences an electrical force
  • If this is the only force on the particle, it
    must be the net force
  • The net force will cause the particle to
    accelerate according to Newtons second law
  • If the field is uniform, then the acceleration is
    constant
  • If the particle has a positive (negative) charge,
    its acceleration is in the direction of
    (opposite) the field

25
Particle Summary
26
Electric Dipole
  • An electric dipole consists of two charges of
    equal magnitude and opposite signs separated by
    2a
  • The electric dipole moment p is directed along
    the line joining the charges from q to q and
    has a magnitude of p 2aq
  • Assume the dipole is placed in a uniform field,
    external to the dipole (it is not the field
    produced by the dipole) and makes an angle ? with
    the field
  • Each charge has a force of F Eq acting on it

27
Electric Dipole
  • The net force on the dipole is zero
  • The forces produce a net torque on the dipole
  • t 2Eqa sin ? pE sin ?
  • The torque can also be expressed as the cross
    product of the moment and the field

28
Electric Dipole
29
Classification of Substances vs. Their Ability to
Conduct Electric Charge
  • Conductors are materials in which the electric
    charges move freely in response to an electric
    force (e.g., copper, aluminum, silver, etc.)
  • When a conductor is charged in a small region,
    the charge readily distributes itself over the
    entire surface of the material
  • Insulators (dielectrics) are materials in which
    electric charges do not move freely (e.g., glass,
    rubber, etc.)
  • When insulators are charged (by rubbing), only
    the rubbed area becomes charged (no tendency for
    the charge to move into other regions of the
    material)

30
Classification of Substances vs. Their Ability to
Conduct Electric Charge
  • Semiconductors their characteristics are
    between those of insulators and conductors (e.g.,
    silicon, germanium , etc.)

31
An Atomic Description of Dielectrics
  • Molecules are said to be polarized when a
    separation exists between the average position of
    the negative charges and the average position of
    the positive charges
  • Polar molecules are those in which this condition
    is always present
  • Molecules without a permanent polarization are
    called nonpolar molecules
  • The average positions of the positive and
    negative charges act as point charges, thus polar
    molecules can be modeled as electric dipoles

32
An Atomic Description of Dielectrics
  • A linear symmetric molecule has no permanent
    polarization (a)
  • Polarization can be induced by placing the
    molecule in an electric field (b)
  • Induced polarization is the effect that
    predominates in most materials used as
    dielectrics in capacitors

33
An Atomic Description of Dielectrics
  • In the absence of an electric field the molecules
    that make up the dielectric (modeled as dipoles)
    are randomly oriented
  • An external electric field produces a torque on
    the molecules partially aligning them with the
    electric field alignment of dipoles reduces the
    electric field

34
Answers to Even Numbered Problems Chapter 20
Problem 14 1.6 1020
35
Answers to Even Numbered Problems Chapter 20
Problem 26 5.2 1011 N/C
36
Answers to Even Numbered Problems Chapter 20
Problem 42 (1.6 iˆ - 0.33 jˆ) N or 1.7 N at an
angle of - 11
Write a Comment
User Comments (0)
About PowerShow.com