TWO%20WHEELER%20SELF%20SIDE%20STAND

1
TWO WHEELER SELF SIDE STAND

• PROJECT MEMBER-
• N.KAMAL
  (85909144004)
• S.ARAVINDANATHAN (85909144501)
• PROJECT GUIDE-
• Mr. SURENDAR.G M .Tech.,
• (Head of the dept of mechanical
  engineering)

2
ABSTRACT

• In now a days two wheelers plays a
  important role in transport. Due to humans
  carelessness accidents happening. In that most
  important in due to forget to hold this side
  stand in two wheeler.
• In earlier days buzzer method in used
  for remedy in this case and next gear pedal
  method. But two methods are not efficient. In now
  a days people are most of them want simple
  operation.
• So we designed fully automatic self side
  stand method. Its most efficient compared to
  other, While we switch on the bike. By self
  start method is used start this vehicle. By using
  this method we can relieve this side stand from
  its position easily.

3
INTRODUCTION

• Our aim of prevent the two wheeler accident in
  our project.
• Now a day people transport one place to another
  place using mostly two wheeler vehicle.
• Same time late of accident in rods in human
  careless of side stand un hold .
• We requirement this problem so solve in this our
  project.
• For self transmission system it is sufficient to
  rotate at 1500 rpm.
• A pinion having gear ratio with the teeth on
  flywheel of 151 ratio.
• We can be used drive the flywheel.
• So that high torque is required to start the self
  transmission system then lift the side stand.

4
DISADVANTAGE-
WWW.USBILITYMATTER.ORG WWW.GOURAV
5
LITERTURE SURVEY

• In current status compare to other
  project through internet,
• But in our project this new creation by
  more the advantage if due to our project.
• First look the figure is old model and
  failure model.

6

• GEAR PEDAL METHOD
• Author DANIEL SIMONS.
• Gear pedal method is the all two
  wheeler are not suitable trouble shooting
  problem.

7

• BUZZER METHOD
• Author GORILLA
• Buzzer method is always so high noise
  pollution from any one two wheeler vehicle user
  

8

• INDICATOR METHOD
• Author christopher
• Indicator method is the electric device
  so any one problem cannot reuse.

9
WORK IN PROGRESS
FLOW CHART
DECEMBER- Select the
suitable project name distribute the separate
work our project member. JANUARY-
To create the block diagram two wheeler self
side stand using power point to complete
them. FEBRUARY- The design
work for initial condition and always material
collections for initial condition.
This month end design and fabrication works
complete in our project. MARCH-
The full project work design, fabrication and
record work surely finished.
10
BLOCK DIAGRAM
(1).BATTERYDC (2).SOLENOID SWITCH (3).STARTING
MOTAR (4).SELF TRANSMISSION SYSTEM (a).
TROSION SPRING (b). UNBALANCE WEIGHT
(c). PINION (5). FLY WHEEL (6).SLEEVE (7).ROPE (8)
.BEARING (9).SIDE STAND
c
5
6
a
b
2
3
4
7
1
8
9
11
APPROXIMATE DETAILS
S.NO MATERIALS SIZE QUANTITY
1. Battery lead acid 12 dc medium One
2. Side stand Normal One
3. Starting motor 1500rpm One
4. Solenoid switch medium One
5. Fly wheel - One
6. Pinion - One
7. Torsion spring - One
8. Unbalance weight - One
9. Rope - One
10. Shaft sleeve - One
12
PURCHASE DETAILS
S.NO MATERIAL DATE AMOUNT
1. Battery 3-1-2012 500
2. Side stand 7-1-2012 240
3. Solenoid switch 15-1-2012 190
13
THANKING YOU