Title: Food Preparation Reheating of leftovers
1Food PreparationReheating of leftovers
- Leftovers shall be heated to an internal
temperature of 165 degrees for 15 seconds in no
longer than a two hour period - Foods reheated in a microwave must be heated to
165 degrees, rotated or stirred, and let stand
(covered) for two minutes prior to serving - The steam table should not be used for reheating,
Why not?
2Food PreparationMicrowave Cooking
- If foods are cooked from a raw state, they must
be cooked to a temperature of 165 degrees - The item must be stirred and temped in several
places
3Food PreparationCold foods
- If preparing at risk items that will need
refrigeration prior to service such as tuna
salad, the item must - Be down to 41 degrees within four hours of
preparation
4Hygienic PracticesHand washing
5Hygienic PracticesHand washing
- Critical to prevent FBI from fecal to oral route
Wash hands after - Entering the kitchen
- Touching face, nose, hair etc
- Handling raw and prior to handling ready to eat
- Touching anything soiled
6Hygienic Practices Hand Sanitizers
- Cannot use in lieu of hand washing due to the
vigorous friction necessary in order to
kill/remove micro organisms - Can use in addition to hand washing
- This applies to food preparation in the kitchen
not necessarily serving food
7Hygienic PracticesFingernails Should be Clean
- Gloves must be worn if the employee has
artificial fingernails or is wearing nail polish
8Hygienic PracticesClothing
9Hygienic PracticesJewelry
- One single plain ring is acceptable
- No watches or bracelets
- Jewelry can collect soil and can hinder proper
hand cleaning - Jewelry can fall into the food
10Hygienic PracticesHair
- Some type of hair restraint is required
- No requirement for beards or moustaches
- For persons working in the kitchen, not servers
in the dining room
11Hygienic PracticesEating, Smoking, Drinking
- Staff can have beverages if they are in cups with
lids and preferably a straw - Beverage must be covered and be spill-proof
- Otherwise, no eating, smoking or drinking in food
preparation areas
12Hygienic Practices Sick employees
- The sick person must report to the person in
charge
13Hygienic Practices Sick employees
- An employee
- infected with a communicable disease that can be
transmitted by foods or - while afflicted with a boil, infected wound on an
exposed body part, or - Having an acute respiratory infection cannot work
14Hygienic Practices Boil, infected wounds
- The employee should wear a dry durable bandage
and a single-use glove if on hands or wrists
15Hygienic Practices Discharge from the eyes,
nose, mouth
- Employees with persistent sneezing, coughing, or
a runny nose with discharge may not work with
exposed food, clean equipment, utensils, etc. - Refer to Exclusions Restrictions CDPHE
16Distributing FoodDispensing ice
- The scoop can be stored in ice if the handle is
facing out and not touching the ice - If ice is used as a coolant, it cannot be reused
for consumption
17Distributing FoodCovering
- Food should be covered during transportation
- Insulated plate covers
- Lids or plastic wrap for cups, mugs, glasses
- Others?
18Serving FoodTray line holding temperatures
- Cold holding temperatures must be 41 degrees or
colder (to kill listeria) - Hot holding temperatures must be at least 135
degrees or hotter (to kill perfringens)
19Tray line Temperatures
- A sanitized thermometer should be used
- Temps will usually be checked at the start of
tray line to cause the least interference
possibly at the end - Hot and cold foods with food borne illness risk
should be checked including mechanically altered
foods and milk
20Soiled Equipment, Utensils, and Surfaces
Requirements for Sanitizing
- Quaternary ammonia 200 ppm
- Chlorine bleach 50 ppm
- Iodine 12.5 (rarely seen)
- Hot water 180 degrees
21Requirements for Ware Washing Machines
- An accurate thermometer is required
- Manufacturers data plate has to be affixed to
the machine (look for metal plate) - Information regarding requirements for wash and
rinse cycle temperatures - Pressure required for sanitizing rinse (15 25)
- Required type and concentration of sanitizing
solutions
22Requirements for Ware Washing Machines
23Requirements for Ware Washing Machines
- Food must be rinsed or scraped off dishes prior
to being run through the machine - Dishes must be allowed to air dry after being
removed from the dish machine - Machines must be cleaned at least daily or as
often as necessary to maintain satisfactory
condition
24Requirements for Ware Washing Machines Use
- Staff must wash hands between handling dirty
dishes (i.e. loading the machine) and removing
clean dishes from the machine
25Requirements for Ware WashingChemical
Sanitizing Machine
- Minimum rinse temperature of 120 degrees, or in
accordance with Manufacturers specifications - Wash water kept clean
- Chemical sanitizer dispensed according to
Manufacturers specifications - The sanitizer level should be 50 ppm on the dish
surface in final rinse
26Requirements for Ware Washing Hot Water
Sanitizing Machine
- The water should be kept clean
- The rinse temperature should be at least 180
degrees and wash 150 165 - Achieving a surface temperature (plate for
example) of 160 degrees is an acceptable means to
test for adequate temperature - Surveyors will use heat sensitive strips to test
for 160 degrees, apply to a clean plate - It should turn black if 160 degrees is reached
27Soiled Equipment, Utensils, and Surfaces
Requirements for Wiping Cloths
- Wiping cloth should be stored in sanitizer
solution, can be out for a few minutes but must
be at the proper concentration when checked - Facility should have test strips
- Quat or ammonia and chlorine/bleach are most
common - Not in food containers
28Soiled Equipment, Utensils, and Surfaces
Chemical Test Kits are Required
29Soiled Equipment, Utensils, and Surfaces-
Sanitizers
- Read chlorine level within seconds
- Read ammonia level 10-90 seconds
- If Chlorine is too strong it can leave a toxic
residue (Greater than 200 ppm)
30Soiled Equipment, Utensils, and Surfaces
Requirements for Manual Dish/Pot Washing
31Soiled Equipment, Utensils, and Surfaces
Requirements for Manual Dish/Pot Washing
- A three compartment sink must be used
- Wash must be 110 degrees
- Rinse
- Sanitize same requirements for wiping cloths
- Must be immersed in chemical sanitizer sink for
at least 30 seconds - Hot water of 171 degrees for 30 seconds
32Soiled Equipment, Utensils, and Surfaces
Requirements for Storing
- Is there anything wrong with how these utensils
are stored?
33Soiled Equipment, Utensils, and Surfaces
Requirements for Storing
- Cleaned and sanitized equipment and utensils
shall be handled in a way protecting them from
contamination - The handles should be pointing out
- Silverware should be touched by the handle
34Soiled Equipment, Utensils, and Surfaces
- Cups, glasses, bowls, plates and similar items
should be handled without contact with the
inside surfaces or surfaces that contact the
users mouth - Clean dishes, utensils, equipment shall be
stored in a way to protect from contamination by
splash, dust or other means - Mixers? Slicers? Inverted?
35Refuse/Garbage storage
- Garbage cans must be clean and lined with plastic
bags
36Exterior Trash Dumpster Area
37Exterior Trash Dumpster Area
- Should be clean area without grease, garbage or
evidence of rodents - Dumpster should be enclosed and not open when
there is garbage inside
38Other Environmental Issues
- Light bulbs should have covers
39Other Issues
- All chemicals should be labeled