Lexmark Wireless

1
Lexmark Wireless Printer Adaptor Instructions
Step 1. For a Mac, go to network preferences/
select built-in-ethernet and click on TCP/IP tab
and annotate your Computers ethernet IP address.
For PC, go to Control Panel/ Network Connections
and select TCP/IP, then annotate IP
address. Step 2. Change the Ethernet IP
Address/subnet/router to 169.254.98.201 /
255.255.0.0/169.254.98.200 Click apply now.
2
Lexmark Wireless Printer Adaptor Instructions
Step 3. For a Mac Click on the Proxies Tab,
write down your proxy settings and remove all
proxy selections in the left window under select
a proxy server to configure.
For a PC, change the proxy within
the web browser you will be
using.
3
Lexmark Wireless Printer Adaptor Instructions
Step 4. Open internet explorer and type
http//169.254.98.200/ in the address and press
enter. Step 5. Enter admin in user ID and
public in password block and click OK.
4
Lexmark Wireless Printer Adaptor Instructions
Step 4. The Admin window appears. Type in the
device Name (location-Room Printer ) I.e.
9858-205K-2. Step 5. Check static for IP
address Mode. Leave the default IP address in the
device. Step 6. Leave Admin and Password
default. Step 7 Click on Save button.
5
Lexmark Wireless Printer Adaptor Instructions
Step 8. Click on Reboot window when it
appears Step 9. The reboot in 3 second
window will appear.
6
Lexmark Wireless Printer Adaptor Instructions
Step 10. Once the printer adapter completes the
reboot process it will display the Information
page.
7
Lexmark Wireless Printer Adaptor Instructions
Step 11. Click on the Security Tab and check
Enable WEP. Step12 Select the WEP Key 1 Step 13
Select Deny encrypted Data Step14 Select Open if
Airspace/Proxim/Dell and Shared if Apple wireless
network. Step 15 Type in the HEX code for the 5
or 13 digit WEP encryption password. Remember
there is 2 hex values for every 1 ASCII code. Go
to http//d21c.com/sookietex/ASCII2HEX.html if
you dont know how to do the conversion Click on
Save
8
Lexmark Wireless Printer Adaptor Instructions
Step 16. Click on Reboot window when it
appears Step 17. The reboot in 3 second
window will appear. Step 18 Plug in the
wireless device to the printer with a CAT5e cable
and plug in the Wireless print adapter into the
Printer for power using the Y connector. Step19
Test the printer to be sure it works..