Marine Products

1
Marine Products
From. Australian Inhibitor
2
The Marine Silk story

• Leaving boats moored for long stints in water
  presents its own unique problems. Algae and
  Barnacle growth.
• Resale values of boats up to 5.48 meters can be
  affected if fully anti fouled.
• Long term residents of a tidal river system
  approached Australian Inhibitor to come up with a
  solution to treat boats for short durations in
  water.
• Australian Inhibitor with its vast chemical and
  engineering resources conducted both laboratory
  and sea trials of a range of formulas.
• After 159 separate sea trials a workable product
  was formed that not only protected the hull from
  algae and barnacles however also provided
  significant increases in boat speed and fuel
  savings
• Further results can found within our technical
  data on the accompanying pages .

3
How Marine Silk works.

• Marine silk when applied provides a textured
  surface not unlike that of the skins of sharks
  and dolphins .This results in reduced drag
  through the water thereby allowing greater speed
  and reduced fuel consumption.
• Marine Silk will inhibit the growth of Barnacle
  and Algae and other marine organisms on a short
  term basis by preventing anchoring of such
  organisms on to the hull.
• Marine Silk will make the removal of of such
  organisms easier for boats left in the water for
  periods up to 1 month .
• Marine Silk should be applied to a clean dry
  hull where it will form a highly impervious water
  repellent film.
• Marine Silk is proudly developed in Australia .

4
Trials on the water
A total of 159 separate tests were carried out on
Port Phillip bay In displacement mode speeds
cruising speeds on the plane.
5
What we discovered .

• 
  Displacement Speeds
• Clean hull rpm
  marine silk applied
• Knots kph
  knots kph increase
• 3.82 7.075 1250
  4.14 7.67 8.48
• 4.90 9.075 1500
  5.18 9.67 6.05
• cruising
  /Planing speeds
• 16.47 30.50 4000
  17.00 31.50
  3.28
• 18.76 34.76 4250
  19.17 35.50
  2.16
• 20.79 38.50 4500
  21.19 39.25
  1.95
• Knots kph litres
  /hour litres/hour fuel
  savings
• 16.2 30
  14.32 13.97
  2.44
• 18.9 35
  16.15 15.50
  4.02
• 21.6 40
  19.67 18.07
  8.13
• A total of 158 tests were performed over many
  weeks the above being a precise version of all
  tests

6
Laboratory /on water tests
One month in the water without any application
Note.. severe algae and barnacle growth
One month Marine silk applied Traces of dirt and
scum only no algae growth
7
Marine kit grease
for Boat zippers .
Small compact pack 15 gram for on boat use ideal
for Boat zippers, battery terminals, anchor
winches Product is thermally stable from -40 ºC
to 260º C .
8
VCI emitters

• VCI emitters for control panels and sensitive
  electronic equipment

Product saturates the internal free space of
cabinet and protects vital components from
corrosion .
9
Rust preventatives Aerosol Liquids
400 gram aerosol 20litre / 200 litre liquid.
Thermally stable
Thixotropic Non stain -40ºC to
260º C Sunlight resistant
Lubricates and penetrates
10
Innovation.. Do not go where there is a path,
go instead where there is no path and Leave a
trail
Australian Inhibitor Pty ltd 6-Nicholas
drive, Dandenong South 3175 Phone 03
9768 2322 Fax [phone] Email
enquiries_at_australianinhibitor.com.au
Webwww.australianinhibitor.com.au
Proudly Protecting Australias Local Export
Industries