Title: Time and Geology
1Chapter 3
2Geochronology
- The science that deals with determining the ages
of rocks is called geochronology.
3Methods of Dating Rocks
- Relative dating - Using fundamental principles of
geology (Steno's Laws, Fossil Succession, etc.)
to determine the relative ages of rocks (which
rocks are older and which are younger). - Absolute dating - Quantifying the date of the
rock in years. This is done primarily by
radiometric dating (or analysis of the breakdown
of radioactive elements in the rocks over time).
4Geologic Time Scale
- The geologic time scale has been determined
bit-by-bit over the years through relative
dating, correlation, examination of fossils, and
radiometric dating. - Boundaries on the time scale are drawn where
important changes occur in the fossil record,
such as extinction events.
5Geochronologic Units
- The geologic time scale is divided into a number
of types of units of differing size. From the
largest units to the smaller units, they are - Eons
- Eras
- Periods
- Epochs
- These units are geochronologic units.
- Geochronologic units are time units.
6(No Transcript)
7Eons
- Eons are the largest division of geologic time.
In order from oldest to youngest, the three eons
are - Archean Eon - "ancient or archaic" - oldest rocks
on Earth - Proterozoic Eon - "beginning life" (2.5 billion
to 542 million years ago) - Phanerozoic Eon - "visible life" (542 million
years ago to present)
8The Precambrian
- The Archean and Proterozoic are together referred
to as the Precambrian, meaning before the
Cambrian Period. - The Precambrian covers 87 of geologic history.
9Eras
- There are three eras in the Phanerozoic Eon. Eras
are divided into geologic periods. In order from
oldest to youngest, the three eras are - Paleozoic Era - "ancient life" (such as
trilobites) - Mesozoic Era - "middle life" (such as dinosaurs)
- Cenozoic Era - "recent life" (such as mammals)
10Periods
- Eras are divided into periods.
11Paleozoic Era
- Permian Period
- Carboniferous Period (Mississippian and
Pennsylvanian Periods in North America) - Devonian Period
- Silurian Period
- Ordovician Period
- Cambrian Period (oldest)
12Mesozoic Era
- Cretaceous Period
- Jurassic Period
- Triassic Period (oldest)
13Cenozoic Era
- Neogene Period (youngest today)
- Paleogene Period (oldest)
- On maps and in publications prior to 2003, you
will see the two periods of the Cenozoic Era
listed as - Quaternary Period
- Tertiary Period (oldest)
- These are not the same as the current two periods.
14Epochs
- Periods can be subdivided into epochs
- Epochs can be subdivided into ages
15Epochs of the Cenozoic Era
- Neogene Period
- Holocene Epoch (youngest - today)
- Pleistocene Epoch
- Pliocene Epoch
- Miocene Epoch
- Paleogene Period
- Oligocene Epoch
- Eocene Epoch
- Paleocene Epoch (oldest)
16Chronostratigraphic units
- Chronostratigraphic units are the actual rocks
formed or deposited during a specific time
interval. -
- (They are sometimes called time-rock units.)
17Chronostratigraphic units
- Chronostratigraphic units include
- Eonothem (all rocks corresponding to a given eon)
- Erathem (all rocks corresponding to a given era)
- System (all rocks corresponding to a given
period) - Series (all rocks corresponding to an epoch)
- Stage (all rocks corresponding to a particular
age)
18Periods and Systems
- Geochronologic units (time units) have the same
names as the chronostratigraphic units (time rock
units) that they represent.For example, the
Cambrian System is a rock unit, and the Cambrian
Period is a time unit. The rocks of the Cambrian
System were deposited during the Cambrian Period.
19Principles of Radiometric Dating
20Review of Atoms
- Atom smallest particle of matter that can exist
as a chemical element. - The structure of the atom consists of
- Nucleus composed of protons (positive charge) and
neutrons (neutral) - Electrons (negative charge) orbit the nucleus
- Various subatomic particles
21Two models of atoms
22Ions
- Most atoms are neutral overall, with the number
of protons equaling the number of electrons. - If there is an unequal number of protons and
electrons, the atom has a charge (positive or
negative), and it is called an ion.
23Atomic Number
- Atomic number of an atom number of protons in
the nucleus of that atom. - Example The atomic number of uranium is 92. It
has 92 protons.
24Mass number
- Mass number is the sum of the number of protons
plus neutrons.Example Uranium-235 has 92
protons and 143 neutrons. - The mass number may vary for an element, because
of a differing number of neutrons. -
25Isotopes
- Elements with various numbers of neutrons are
called isotopes of that element. - Example uranium-235 and uranium-238
- Some isotopes are unstable. They undergo
radioactive decay, releasing particles and
energy. - Some elements have both radioactive and
non-radioactive isotopes. - Examples carbon, potassium.
26What happens when atoms decay?
- Radioactive decay occurs by releasing subatomic
particles and energy. - The radioactive parent element is unstable and
undergoes radioactive decay to form a stable
daughter element. - Example Uranium, the parent element, undergoes
radioactive decay, releases subatomic particles
and energy, and ultimately decays to form the
stable daughter element, lead.
27Radioactive Parent Isotopes and Their Stable
Daughter Products
Radioactive Parent Isotope Stable Daughter Isotope
Potassium-40 Argon-40
Rubidium-87 Strontium-87
Thorium-232 Lead-208
Uranium-235 Lead-207
Uranium-238 Lead-206
Carbon-14 Nitrogen-14
28Radioactive Decay of Uranium
- As uranium-238 decays to lead, there are 13
intermediate radioactive daughter products formed
(including radon, polonium, and other isotopes of
uranium), along with and 8 alpha particles and 6
beta particles released.
29Radioactive Decay of Uranium
30Subatomic Particles and Radiation Released by
Radioactive Decay
- Alpha particles - large, easily stopped by
paper charge 2 mass 4 - Beta particles - penetrate hundreds of times
farther than alpha particles, but easily stopped
compared with neutrons and gamma rays. charge
-1 mass negligible - Neutrons - highly penetrating no charge mass
1 - Gamma rays (high energy x-rays) - Highly
penetrating electromagnetic radiation can
penetrate concrete. Lead shield can be used.
Photons (light). No charge or mass.
31Radioactive Decay
- Naturally-occurring radioactive materials break
down into other materials at known rates. This is
known as radioactive decay.
32Radioactive Decay Rate
- Many radioactive elements can be used as geologic
clocks. Each radioactive element decays at its
own constant rate. - Once this rate is measured, geologists can
estimate the length of time over which decay has
been occurring by measuring the amount of
radioactive parent element and the amount of
stable daughter elements.
33Mass Spectrometer
- The quantities and masses of atoms and isotopes
are measured using an instrument called a mass
spectrometer. - The mass spectrometer came into use after WWI
(1918). This led to the discovery of more than
200 isotopes.
34Measuring Decay Rates
- The decay rates of the various radioactive
isotopes are measured directly using a mass
spectrometer. - Basically, the mass of a quantity of a
radioactive element is measured. Then after a
particular period of time, it is analyzed again.
The change in the number of atoms over time gives
the decay rate.
35Decay Rates are Uniform
- Radioactive decay occurs at a constant
exponential or geometric rate. - The rate of decay is not affected by changes in
pressure, temperature, or other chemicals. - The rate of decay is proportional to the number
of parent atoms present.
36Half-Life
- Each radioactive isotope has its own unique
half-life. - A half-life is the time it takes for half of the
parent radioactive element to decay to a daughter
product.
37Half Lives for Radioactive Elements
Radioactive Parent Stable Daughter Half life
Potassium-40 Argon-40 1.25 billion yrs
Rubidium-87 Strontium-87 48.8 billion yrs
Thorium-232 Lead-208 14 billion years
Uranium-235 Lead-207 704 million years
Uranium-238 Lead-206 4.47 billion years
Carbon-14 Nitrogen-14 5730 years
38Decay Curve for Uranium-238
39Decay Curve for Potassium-40
40Rocks That Can Be Dated
- Igneous rocks are best for age dating.
-
- The dates they give tell when the magma cooled.
- When the magma cools and crystallized, the newly
formed crystals may contain some radioactive
elements, such as potassium-40 or uranium that
can be dated.
41Minerals That Can Be Dated
- Potassium-40 decays and releases argon gas,
which is trapped in the crystal lattice. - Potassium-40 is found in these minerals
- Potassium feldspar (orthoclase, microcline)
- Muscovite
- Amphibole
- Glauconite (greensand found in some sedimentary
rocks)
42Minerals That Can Be Dated
- Uranium may be found in
- Zircon
- Urananite
- Monazite
- Apatite
- Sphene
43Dating Sedimentary Rocks
44Dating Sedimentary Rocks
- Radioactive mineral grains in sedimentary rocks
are derived from the weathering of igneous rocks.
Their dates are the time of cooling of the magma
that formed the igneous rock. - The date does not tell anything about when the
sedimentary rock was deposited.
45Dating Sedimentary Rocks
- If the sedimentary rock has a mineral that
formed on the seafloor as the rock was cemented,
then it may be possible to age date it. - The greensand mineral, glauconite, contains
potassium, and can be dated using the
potassium-argon technique.
46Dating Sedimentary Rocks
- The ages of sedimentary rocks and fossils are
determined using both relative and absolute
dating.
47Dating Fossils
- The ages of fossils in a sequence of sedimentary
rocks can be determined using both relative and
absolute dating.
48Dating sedimentary rocks and fossils
- Locate a sequence of sedimentary rocks that
contains some igneous rocks (such as a lava flow,
volcanic ash bed, intrusion, or underlying
igneous rock). - Get a radiometric date for the igneous rocks.
- Use relative dating to determine the relative
ages of the sedimentary rocks. Bracket the
sedimentary rocks between two igneous rocks of
known age.
49Dating sedimentary rocks and fossils contd
- Correlate the sedimentary rocks with sedimentary
rocks in another area which contain the same
fossils. They are correlated (or "matched up") on
the basis of the fossils they contain. They must
contain the same species of fossils. - Using this method, the age of the rocks in other
areas is determined indirectly, from the ages of
the fossils they contain.
50- The geologic time scale was established by doing
this repeatedly for many locations around the
world. - The geologic time scale is a composite vertical
sequence representing all known rock units and
their fossils, worldwide, in sequential order. - Absolute ages of rocks have been determined
through radiometric dating where possible. - The geologic time scale provides a calibrated
scale for determining the ages of rocks worldwide
by examining their fossils.
51Carbon-14 dating
- Cosmic rays from the sun strike nitrogen-14 atoms
in the atmosphere and cause them to turn into
radioactive carbon-14, which combines with oxygen
to form radioactive carbon dioxide.
52Carbon-14 dating
- Living things are in equilibrium with the
atmosphere, and the radioactive carbon dioxide is
absorbed and used by plants. The radioactive
carbon dioxide gets into the food chain and the
carbon cycle. -
- All living things contain a constant ratio of
carbon-14 to carbon-12. (1 in a trillion).
53Carbon-14 dating
- At death, carbon-14 exchange ceases and any
carbon-14 in the tissues of the organism begins
to decay to nitrogen-14, and is not replenished
by new C-14. -
- The change in the carbon-14 to carbon-12 ratio
is the basis for dating.
54Carbon-14 dating
- The half-life is so short (5730 years) that this
method can only be used on materials less than
70,000 years old. - Assumes that the rate of carbon-14 production
(and hence the amount of cosmic rays striking the
Earth) has been constant over the past 70,000
years.
55(No Transcript)
56Fission Track Dating
- Charged particles from radioactive decay pass
through mineral's crystal lattice and leave
trails of damage called fission tracks. - These trails are due to the spontaneous fission
(or radioactive decay and breakdown) of uranium.
57Fission Track Dating
- Procedure to study
- Enlarge tracks by etching in acid (to view with
light microscope) - Or view with electron microscope
- Count the etched tracks (or measure track density
in an area) - The number of tracks per unit area is a function
of age and uranium concentration.
58Fission Track Dating
- Useful in dating
- Micas (up to 50,000 tracks per cm2)
- Tektites (glassy rocks produced when meteorite
impact melts bedrock forming molten droplets
which cool quickly as they are thrown into the
atmosphere.) - Natural and synthetic (manmade) glass
59The Oldest Rocks
- The oldest rocks that have been dated are
meteorites. They date from the time of the origin
of the solar system and the Earth, about 4.6
billion years old.
60The Oldest Rocks
- Moon rocks have similar dates, ranging in age
from 3.3 to about 4.6 billion years. - The oldest Moon rocks are from the lunar
highlands (lighter-colored areas on the Moon),
and may represent the original lunar crust
61The Oldest Rocks
- The oldest dates of Earth rocks are 4.2
billion-year-old detrital zircon grains in a
sandstone in western Australia. - These grains probably came from the weathering
and erosion of 4.2 billion-year-old granite that
must have been exposed at the time the sand
grains were deposited.
62Other Old Earth Rocks
- Southwestern Greenland (4.0 b.y. granites)
- Minnesota (4.0 b.y. metamorphic rocks)
- Northwest Territories, Canada (3.96 b.y. Acasta
gneiss) - Beartooth Mountains, Montana (3.96 b.y. zircons
in quartzite) - China (3.8 b.y.)
- South Africa (3.7 b.y.)
- West Africa (3.6 b.y.)
- Still older rocks may remain to be found and dated
63Why are Earth Rocks Younger than Meteorites and
Moon Rocks?
- The Earth is geologically active. The older rocks
may have been eroded away. - Older rocks may have been deeply buried under
sedimentary rocks, or beneath thrust sheets. - Older rocks may have been heated, metamorphosed,
or melted, and their dates "reset" to the time of
heating, metamorphism, or melting.