Title: More Control Charts
1More Control Charts
2Why?
- There are many probability distributions in our
world
3(No Transcript)
4The Binomial Distribution, The distribution of
coin tosses.
5(No Transcript)
6(No Transcript)
7Two types of data
- Variables----Continuous
- AttributesDiscrete, Countable
- Two types of attributes data
- You can count occurrences and non-occurrences.
- You can only count occurences.
Examples?????
8Some Variables Shewart Charts
- X-mR aka i-Chart, Individuals Chart
- X-bar-range
- X-bar-sigma
9Some Attributes Shewart Charts
- p-Chart
- np-Chart
- u-Chart
- c-Chart
10Decide on type of data
Continuous (Variables) Data
Discrete (Attributes) Data
Yes
No
Yes
No
Yes
No
Yes
Yes
No
No
?R
?s
XmR
c-chart
11Example Individuals Chart
12Example X-Range Chart
13Example X-Sigma Chart
14How did they do that?
15The basic pattern.
- Plot observed measurements over time.
- Measurements, counts, rates
- Plot Centerline
- Average measurement or count, pooled rate.
- Plot Control Limits
- Centerline /- Multiplier X Standard Deviation
16Multiplier does 3 Things
- Determines the number of sigmas
- usually 3
- Converts standard deviations to standard errors
(variables data). - Can include factor to adjust for unusually small
or large number of subgroups or time intervals.
Note How multiplier is constructed and used
varies by author.
17Standard Deviation
- Based on sample estimate of population standard
deviation. - Based on moving ranges.
- Based on ranges.
18The i-Chart or XmR Chart
- Calculate average of all individual values x
- Calculate all the moving ranges (MRi)
- MRi xi-xi-1
- Calculate the average MR Rbar
- Calculate control limits xbar /- 2.66Rbar
- Plot xbar
- Plot control limits
- Plot individual values, points
19The Xbar-Range Chart
20The Xbar-Sigma Chart
21The Xbar-Sigma Chart (Part II)
22Is 3 always OK?
- Notice 3 is multiplied by the SD.
- This gives /- 3 Sigma Control Limits.
- Designed for 25 observations.
- When you have only 7 observations
- ß risk is too high
- When you have 200 observations
- a risk is too high
- Can use T-Sigma Limits
23T-Sigma Limits
No. of Plotted Points T
2 1.5
3-4 2.0
5-9 2.5
10-34 3.0
35-199 3.5
200-1500 4.0
24How to use T-Sigma Limits
- Substitute the T-Sigma limit from the table for
the 3 in A3, B3, and B4 above. - For attributes charts, simply substitute the
T-Sigma Limits for the multiplier in front of the
standard error.
25The attributes Shewart Charts
- p-Chart
- np-Chart
- u-Chart
- c-Chart
26Example p-Chart
27Example np-Chart
28Example u-Chart
29Example c-Chart
30How did they do that?
31The p-Chart
32The np-Chart
Pooled over all subgroups
33The c-Chart
34The u-Chart
35Choosing Charts
- Continuous
- A. Only 1 observation per subgroupuse iChart
- B. More than 1 observation/subgroup
- i) Less than 10 observations/subgroupuse Xbar-R
- ii) 10 or more observations/subgroup--use
Xbar-Sigma - 2. Attributes
- A. Occurrences (heads) and non-occurrences
(tails) can be counted. - i) Subgroups of equal sizeuse np-Chart
- Ii) Subgroups of unequal sizeuse p-Chart
- B. Only occurrences can be counted.
- i) Equal area of opportunity (denominators)use
c-Chart - ii) Unequal area of opportunity use u-Chart
36See Flow Chart onpage 72 of Carey and Lloyd
Decide on type of data
Continuous (Variables) Data
Discrete (Attributes) Data
Yes
No
Yes
No
Yes
No
Yes
Yes
No
No
?R
?s
XmR
c-chart