Scorpion DCP

1
Scorpion DCP
2
Scorpion DCP

• Remote Access Dry-Coupled Crawler System

3
Scorpion DCP

• Non-encoded dry coupled crawler designed to be
• Cost effective
• Simple to set up and use
• Compatible with any UT set

4
Scorpion DCP

• Adds remote access thickness measurement
  capability to existing UT equipment

5
Scorpion DCP

• Unique Dry Coupled Wheel Probe
• No liquid couplant required
• 2.5mm near surface resolution

6
Scorpion DCP

• A 5mhz, twin crystal transducer is mounted in the
  centre of the wheel probe axle

7
Scorpion DCP

• A pair of 12mm thick Ro-Cee rubber tyres fit over
  the Probe axle
• A cork washer prevents cross-talk between each
  side of the transducer

8
Scorpion DCP

• Unique Properties of Ro-Cee rubber
• High wear resistance
• Attenuation very close to water
• Similar impedance to Perspex
• An effective alternative to liquid or gel
  Ultrasonic couplant

9
Scorpion DCP

• A neodymium magnet mounted in front of the wheel
  probe maintains adequate probe pressure

10
Scorpion DCP

• No wasteful water-feed required
• Able to climb higher than a water fed crawler (no
  water to carry)
• Supplied with 50M Umbilical

11
Scorpion DCP

• Simple to setup
• Easy to use

12
Scorpion DCP

• Compatible with most UT set
• UT set connects to Control Module via standard
  BNC connectors

13
Scorpion DCP

• Neodymium belly magnets wheel magnets
• 13.6KG pull-off force

14
Scorpion DCP

• Powered by 12V battery Pack
• Ruggedized for site use
• Provides 8 hours continuous operation
• Audible low voltage alarm

15
Scorpion DCP

• Four independently controlled drive-wheels
  provide full steering control

16
Scorpion DCP

• Cost effective
• Simple to set up and use
• Minimal training required
• No water required
• Able to climb higher than water fed alternatives
  (50M)

17
www.silverwinguk.com
Silverwing
NOT OPERATOR DEPENDENT
TECHNOLOGY DRIVEN