US-Canada Bilateral/MIP - PowerPoint PPT Presentation

About This Presentation
Title:

US-Canada Bilateral/MIP

Description:

US-Canada Bilateral/MIP – PowerPoint PPT presentation

Number of Views:35
Avg rating:3.0/5.0
Slides: 17
Provided by: DOT56
Category:

less

Transcript and Presenter's Notes

Title: US-Canada Bilateral/MIP


1
US-Canada Bilateral/MIP
2
US-Canada Bilateral/MIP
  • MIP signed August 31, 2006
  • Effective 60 days after
  • Recognizes each others AMOs
  • Identifies special conditions

3
US-Canada Bilateral/MIP
14 CFR Part 145 Special Conditions TCCA CAR 573
4
US-Canada Bilateral/MIP
  • References
  • AC 43-10B
  • CFR 14, Part 43.17
  • 8300.10, Vol 3, Ch 100

5
US-Canada Bilateral/MIP
  • FAA repair station may work on Canadian products
    if
  • Repair station is located in the US
  • Meets special conditions of the MIP
  • Excludes annual inspections

6
US-Canada Bilateral/MIP
  • TCCA acceptance may not exceed repair station
    ratings
  • Data approved or acceptable to TCCA
  • Procedures in CRS manuals to meet special
    conditions for Canadian air carriers

7
US-Canada Bilateral/MIP
  • Use only TCCA approved or accepted parts
  • Major repairs documented on
  • Form 337 or,
  • In accordance with Standard 571, App. L

8
US-Canada Bilateral/MIP
  • Canada Standard 571 app L.htm
  • Canada major repair form.pdf

9
US-Canada Bilateral/MIP
  • Ensure repairs and alterations are accomplished
    with TCCA approved or accepted data
  • Report unairworthy conditions to TCCA
  • SUPs reporting

10
US-Canada Bilateral/MIP
  • Special Conditions when working on Canadian Air
    Carriers
  • Procedures to ensure
  • Compliance with operators work order or contract
  • Applicable TCCA ADs are available
  • Major repairs and alterations are accomplished in
    accordance with TCCA approved data

11
US-Canada Bilateral/MIP
  • Special Conditions when working on Canadian Air
    Carriers
  • Procedures to ensure
  • Major repairs and alterations reported to TCCA
  • Reporting of serious defects to TCCA
  • Compliance with MMM or ICA and handling
    deviations
  • Training program

12
US-Canada Bilateral/MIP
  • Special Conditions when working on Canadian Air
    Carriers
  • A supplement
  • Describing the procedures OR
  • Explain where in the RSM those procedures are
    located

13
US-Canada Bilateral/MIP
  • Special Conditions
  • Must allow inspection by TCCA
  • Cooperate with investigations or enforcements

14
US-Canada Bilateral/MIP
  • Canadian AMO has similar requirements to work on
    US products
  • Canadian AMO must have a supplement to work on US
    air carrier aircraft or parts.

15
US-Canada Bilateral/MIP
  • MIP requires FAA and TCCA to notify each other of
    any investigations that could result in
    revocation, suspension or penalty

16
US-Canada Bilateral/MIP
Write a Comment
User Comments (0)
About PowerShow.com