Sputtering - PowerPoint PPT Presentation

1 / 27
About This Presentation
Title:

Sputtering

Description:

Sputtering The removal of surface atoms due to energetic particle bombardment Sputtering Sputtering First observations: W.R. Grove 1853, J.P. Gassiot and M. Faraday ... – PowerPoint PPT presentation

Number of Views:88
Avg rating:3.0/5.0
Slides: 28
Provided by: henricb
Category:
Tags: sputtering

less

Transcript and Presenter's Notes

Title: Sputtering


1
Sputtering
  • The removal of surface atoms due to energetic
    particle bombardment

2
Sputtering
3
Sputtering
First observations of cathode erosion in gas
discharges W.R. Grove 1853
4
Sputtering
Removal of surface material as a result of
energetic particle bombardment.
  • First observations W.R. Grove 1853, J.P. Gassiot
    and M. Faraday 1854, 1858. J. Plücker 1858.
    Useful for thin film coating?
  • First systematic studies W. Crookes 1891, G.
    Granquist 1897. Independent of target
    temperature.
  • J. Stark 1908, 1909. Hot spots? Binary elastic
    collisions?
  • Cosine emission distribution R. Seeliger 1935.
    Rules out the collision theory?
  • Crystal structure effects, G.K. Wehner 1956.
    Collisions back in. Sputtering yields always
    decrease at high energy 1/E.
  • Linear collision cascades, relation to nuclear
    stopping power, J. Lindhard et al. 1963, J.
    Davies et al. 1960-64. P. Sigmund 1967-69.
  • BCA Monte Carlo, MARLOWE, TRIM. M.T. Robinson
    1974, J. Biersack and J.F. Ziegler 1974
  • Applications in semiconductor industry, coating
    industry, surface analysis, fusion plasma physics
    and and space physics

5
Sputter deposition
DC- and RF sputter deposition is a convenient and
inexpensive coating Technique.
6
Sputter deposition
Magnetron sputter deposition is very widely used
and allows low pressure discharge, high coating
quality and fast deposition
7
Secondary Ion Mass Spectrometry (SIMS)
8
Secondary Ion Mass Spectrometry (SIMS)
JET divertor
1999-2001
1998-2004
Elemental mapping by static SIMS
J.P. Coad et al. J. Nucl. Mater 363-365(2007)
9
Sputtering
10
Sputtering yield measurements
11
Sputtering yield measurements
12
Sputtering yield measurements
Yield energy dependence.
Ejection angle distribution, B. Emmoth, H.
Bergsåker et al 1989, 1990
13
Sputtering
Velocity distribution of sputtered atoms,
measured by laser induced fluoresence. W.
Husinsky et al. 1986
14
Sputtering
Energy distribution of sputtered Tungsten atoms
and tungsten clusters. G. Staudenmaier 1984
15
Crystal structure effect in Sputtering
Single crystal effects in sputtering, G. K.
Wehner, Phys. Rev. 102(1956)690-704
16
Non linear Sputtering yield with heavy ions
Non linear sputtering yield, evidence of spikes .
H.H. Andersen and H. Bay 1974
17
Three different regimes for theory
Single knock-on regime
Linear cascade regime
Spike regime
18
Nuclear stopping power
19
Electronic stopping power
20
Results from linear cascade theory
The linear cascade regime theory got its
semi-final form from P. Sigmund, 1969
21
Monte Carlo calculations
TRIM , J.P. Biersack and W. Eckstein 1984
MARLOWE
22
Monte Carlo calculations
Molecular dynamics, C. Erginsoy et al 1964
23
Monte Carlo calculations
TRIM
24
A simple plasma impurity model
25
Sputtering in fusion devices
26
Sputtering in fusion devices
Impurity fluxes in TEXTOR
I. Gudowska, H. Bergsåker et al. J. Nucl. Mater.
176-177(1990)363
27
Conclusions
  • Sputtering by particle bombartment has been
    observed since 150 years. Apart from being a
    nuisance in many technical systems it also has a
    wide range of useful applications.
  • Physical sputtering is well understood today,
    especially in the linear cascade regime.
    Monte-Carlo methods are very useful in the
    single-knockon regime and with special boundary
    conditions.
  • Physical sputtering is a central physical
    phenomenon in fusion devices. For plasma modeling
    Monte Carlo codes and semi-empirical fits are
    used and give satisfactory results.
Write a Comment
User Comments (0)
About PowerShow.com