Honda Fit Turbo Kit

1
Honda Fit Turbo Kit

• Installation Manual

2
Take off windshield wiper
3
Take this part off
4
Take off the engine of windshield wiper
5
Uninstall the protecting hood
6
Take off the front bumper
ZAGE
7
Take off the stock manifold
8
Remember to keep the stock O2 Sensor that you
take off
9
Take off the stock mid-pipe
10
Remember to keep the stock O2 Sensor that you
take off
11
Install manifold on the turbocharger
12
Please note this particular bolt should be locked
from the bottom up, so it doesnt block another
bolt beside it. Other 3 bolts are locked the
normal way from top.
13
Install the silicon hose first, remember the
turbo clamp, too
14
Turbocharger can be installed from this angle
15
Connect compressor housing inlet and air filter
with Aluminum pipe
Lock up spot
16
Please assemble the pipes according to the
specified order above
5
1
2
4
3
17
Aluminum Pipe 1
1
Lock up spot
18
Aluminum Pipe 2
2
19
Aluminum Pipe 3
3
Lock up spot
20
Install intercooler, please pay attention to the
3 lock up spots.
21
Aluminum Pipe 4
4
Lock up spot
22
Aluminum Pipe 5
Install the smaller air filter
Install blow off
5
23
Install vacuum pipe
Set up of aluminum pipe and vacuum pipe
Blow off
MAP sensor
24
Install oil feed line
Please lock it tight to prevent oil leakage
25
Oil feed line set up
26
Connection of oil feed line on the engine side
27
Install oil drain pipe
28
Install front pipe
29
Install mid pipe
Connect O2 Sensor onto mid pipe first, then
install both onto to car
30
Remember to connect O2 Sensor
31
Install the protecting hood back up
32
Install engine of windshield wiper back up
33
Put the cover back
34
Install windshield wiper back on
35
Put the front bumper back
ZAGE
36
THE END