Laser Holography

1
Laser Holography
2

• Hologram Basics
• A laser-generated image with three-dimensional
  properties
• Created by capturing the intensity and phase
  information produced by the interference of two
  (or more) beams of light
• 2 basic types of holograms Transmission and
  Reflective

3

• Transmission Type Holograms
• the holographic plate is placed behind the object
  and laser, or to the side at 45 degree angle
• Must be viewed with laser light
• Captures an image much bigger than the
  holographic plate
• Allows an image can be projected onto a screen or
  other surface with a laser

4
Litiholo Setup Instant Hologram Film
5

• White Light Reflection Type Holograms
• the holographic plate is placed between the
  object and laser
• can be viewed with white incandescent light (or
  the sun)

Contact Style Exposure
6
Integraf Setup wet process Hologram Film
7

• Hologram Tips
• Follow all printed instructions
• Insure proper and safe use of all laser equipment
• Lasers should be run for approximately 5 minutes
  before attempting any exposure
• Any kind of vibration or movement (this includes
  talking which produces sound wave vibrations)
  will destroy the interference pattern and leave
  you with a blank holographic plate
• Holographic equipment and plates are expensive
  , if in doubt about any step in the
  process.ask!!!

8
Good Luck