NSN / FGC UPDATE

1
NSN / FGC UPDATE

• UPON COMPLETION OF THIS COURSE, THE STUDENT WILL
  BE ABLE TO
• PERFORM FGC UPDATE
• PERFORM REPAIRABLE NIIN UPDATE
• PERFORM RFI/POH UPDATE
• PERFORM REPAIRABLE STOCK STATUS
• INQUIRY

2
NSN / FGC UPDATE

• Establish high AWP percentage and critical
  level
• quantity for a FGC
• Establish movement priority designator and DOP
  
• UIC
• Establish an On Hand RFI quantity
• Inquire on Repairable Stock Summary data
• Establish or Update High AWP Percentage
• Establish or Update Critical Level Quantity
  (this is usually set to 25 of your FAQ depending
  on command policy)

3
NSN / FGC UPDATE

• FGC UPDATE

4
FGC UPDATE
Purpose (1) Update FGC repairable management
data used in the control and
management of repairable assets. (2) High AWP
percentage. (3) Critical level
Quantity. System action (1) Updates FGC
repairable management data on system. (2)
Performs necessary updates in regards to SERNO
control processing.
5
Enter FGC KK
Click on OK
6
Enter CRLT QTY 02 This is usually set to 25 of
your FAQ
Click on Apply
7
NSN / FGC UPDATE

• REPAIRABLE NIIN UPDATE

8
REPAIRABLE NIIN UPDATE
Purpose Update repairable NIIN data currently
maintained in the system. (1)
SRC Card IND. (2) Pool Code.
(3) Security Class.
(4) DOP UIC. (5) MPD (This is
usually set to either 03 for red stripe, or
06 for blue stripe material.
when separating material for shipment this
provides a visual identification to make it
easier) Reference
NAVSUP P485 VOL III pg 7-11 (Adobe pg
437)
9
(No Transcript)
10
CONTINUED

• Long Supply IND. When applicable, indicates that
  there are sufficient quantities in the supply
  pipeline to meet the current demand, and that an
  RFI replacement should be requisitioned rather
  than repaired locally.
• (7) Note Codes (Special Programs,
  Containers, Etc.)
• System Action Updates repairable NIIN data on
  the system.

11
Select Rep NIIN
Enter DOP N00189
Enter MPD 06
Click on Apply
Update Successful
Click on Close
12
Click on Cancel
13
NSN / FGC UPDATE

• RFI / POH UPDATE

14
RFI / POH UPDATE
PURPOSE This is done when establishing an RFI
quantitiy for a newly added item. It also is
used to make adjustments as necessary. The system
normally makes the appropriate adjustments to the
RFI and packup on-hand (POH) inventory counters
during various supply processes. However, you
may need to increase or decrease the RFI or POH
quantities manually. The RFI/POH Update option
enables you make such changes. System Action
(1) Update RFI quantity data (2)
Creates RFI item record(s) (3) Deletes
RFI item record(s) WARNING Unlimited
Quantities. TASK Controlled.
15
(No Transcript)
16
Enter NIIN 00 - 222 - 77
Click on OK
17
Update Qty 6
Select New RFI Qty
Click on Save
18
Close on Cancel
19
NSN / FGC UPDATE

• REPAIRABLE STOCK SUMMARY INQUIRY

20
REPAIRABLE STOCK SUMMARY INQUIRY
Purpose Displays the stock position of a
particular NIIN, FGC, CAGE/PN in a RFI
status. System Action (1)
Displays summary stock status of repairable
component (2) Displays indicative
data for FGC
21
REPAIRABLE STOCK SUMMARY INQUIRY

• CRITICAL LVL
• TAT
• FAQ
• ACBAL
• RFI
• DIFM
• DUE

• SUB-CUSTODY
• SUSPENSE
• PACK-UP ON HAND
• PACK-UP DEPLOYED
• SO IOU
• EXREP IOU

22
(No Transcript)
23
Enter FGC KK
Click on OK
24
Any Bolded Field can be Viewed by Double
Clicking
25
ANY QUESTIONS ???
26
REVIEW AND SUMMARY

• DESCRIBED FGC UPDATE

• DESCRIBED REPAIRABLE NIIN UPDATE

• DESCRIBED RFI/POH UPDATE

• DESCRIBED REPAIRABLE STOCK SUMMARY
• INQUIRY