WT30 Product Explanation

1
WT30 Product Explanation
WT30 Wireless SS Terminal
Wireless SS Terminals
2
Concept

• Target application
• Mainly Remote supervisory of equipment operation
  at FA.
• Sub. Movement such as forklift
• Selling point
• Globalization correspondence
• Export is available by acquisition each radio
  standard of Japan, the U.S., Europe, and China.
• One component with wireless and I/O terminals
• Reduce space, reduce man-hours, reduce cost.
• The small size for the installation in a control
  box
• It is 90mm in height and DIN rail attachment.
• Wiping out of wireless anxiety
• The radio interference can be prevented by the
  antenna series and many frequency channels.
• Monitoring the receiving radio power level by
  the L.E.D.
• Reduction of system cost (systems development,
  installation, maintenance cost)

3
Target Applications The supervisor system in
factory
The best ON/OFF data collection wireless system
for the FA site.
2) RS232C Master Wireless Slave
I/O
1) DeviceNet Master -
Wireless Slave I/O
OC PLC
PC
OR
OC(CS1?CJ1)PLC
DeviceNet
RS232C
WT30-M01 Serial Master
WD30-ME
WT30 Slave
WT30 Slave
Up to 64 slaves
Up to 64 slaves
4
For Global
Available to use in Japan, Europe, U.S.A. and
China.
Applicable Standards
Area Standards
Japan ARIB STD-T66
U.S.A. FCC part15.247
Europe EN 300 440-2
China
5
Wireless Slave has the I/O interface.
We offer the 3 types of Wireless Slaves. 1) 16
Input pts. 2) 8 input and 8 output pts. With
NPN/PNP
Pin Assign
WD30-SMD16 (IN16 pts.)
IN 00
IN 01
IN 02
IN 03
IN 04
IN 05
IN 06
IN 07
COM (IN)
COM (IN)
ERR (P)
V (OUT)
0V (OUT)
ERR (N)
IN 08
IN 09
IN 10
IN 11
IN 12
IN 13
IN 14
IN 15
COM (IN)
COM (IN)
DC 24V
DC 0V
WD30-SMD16(IN8 pts. OUT8 pts. (NPN)) WD30-SMD16-1(
IN8 pts. OUT8pts (PNP))
IN 00
IN 01
IN 02
IN 03
IN 04
IN 05
IN 06
IN 07
COM (IN)
COM (IN)
ERR (P)
V (OUT)
0V (OUT)
ERR (N)
OUT 00
OUT 01
OUT 02
OUT 03
OUT 04
OUT 05
OUT 06
OUT 07
COM (OUT)
COM (OUT)
DC 24V
DC 0V
Note) COM(OUT) is connected to V(OUT) internally
at NPN type. COM(OUT) is connecter to
0V(OUT) internally at PNP type.
6
Design for FA use
Installation in control box with small size and
DIN rail attachment.
105mm
90mm
40mm
Furniture for DIN rail
7
Function Easy setting System registration
System registration can be done by setting SW
only. Tool Software is not required.
System registration can be done by setting SW
only. 1) Scan list Valid / Invalid The
registration for slave entry. 2) The
registration of serial No. Valid / Invalid
This function is for preventing from
miss-communication with the other
wireless group. It's done by the registration
the serial No. Scan list Invalid
There is no entry and registration. You only set
the rotary SW for the number of
slaves. This mode is easy to setting include
exchanging the unit. But this mode has
low security. Scan list Valid Serial No.
registration Invalid Scan list is
automatically created by the setting of the
rotary SW for the number of
slaves. You need to re-set in case of changing
the composition with in I/O size
change. Scan list Valid Serial No.
registration Valid Scan list is
automatically created by the setting of the
rotary SW for the number of slaves.
You have to re-set to exchange the slaves,
even if the same type of slave. But this
mode has high security.
Easy setting
High security
8
FunctionThe display by L.E.D.
You can confirm the R.S.S.I. in L.E.D. You can
do the trouble shooting easily with the L.E.D.s.
The WT30 shows the status in L.E.D.s. WSThe
Status of the Wireless Communication MSThe
Status of the Wireless Unit ERRORSlaveThe
alarm of wireless communication error I/O
LEDsSlaveThe Status of I/O Serial Com.
LEDSerial MasterThe status of Serial
communication
Received Signal Strength Indicator (RSSI) LED
Stability
Instability
Caution
Display at the 9 levels
ERRORSlaveThe output signal that shows the
wireless communication is instability.
9
FunctionFree from Interferences
The construction of more wireless systems becomes
possible.The frequency that can be set is
doubled from current model,WD30. So that, the
interferences such as intermodulation are
decreased.
New added CH
Current CH(WD30)
Current Max34CH ? Max67CH
The decrease of intermodulation
10
FunctionM.C.A.
A steady communication is realized by MCA.This
avoids the obstruction wave automatically.
In case of the frequency SW is set 00, the MCA,
Multi Channel access, function is available. The
wireless units automatically select the good
frequency channel from 2ch,11ch and 21ch when the
wireless communication is interfered.
Rotary SW00
The obstruction wave
2ch 11ch 21ch
Note 1) M.C.A. function is effective for a single
system. Please do not use this
function at the two or more system
installation. Note 2) The frequency channel under
the communication can be confirmed with LED.
11
FunctionRelay function
One slave unit can be used as a repeater. The
communication area can be expanded.
PC
?
RS232C
Serial Master

Wireless slave can be used as a repeater by
setting SW.
?
Repeater
Note1) Becoming the repeater, the slave can't
handle the I/O signal. (I/O
terminal of repeater does NOT work.) Note 2) If
the slave is in the area where wireless master
can communicate, the slave connect
directly to the wireless master. Note 3) Repeater
function works without M.C.A. function.
You can NOT use both repeater function and
M.C.A. function.
Slave
12
System configuration-- Serial master WT30-M01 --
WT30 (Serial Master)
- I/O of the repeater does NOT work.
- WD30-SE/-SE01 can NOT connect to WT30 Serial
Master.
WT30 Slave (Repeater)
WT30 (Slave)
WT30 (Slave)
WD30-SE
- Repeater can be exist only 1 unit in the
system.
WT30 (Slave)
WT30 (Slave)
WT30 (Slave)
WT30 (Slave)

• The number of the wireless slaves is up to 64
  including the number of connected slaves via
  repeater

13
System configuration-- Wireless DeviceNet
Master, WD30-ME/-ME01 --
WD30-ME (Wireless Master)

• WT30 can NOT connect as a repeater.

WT30 (Slave)
WD30-SE (Slave)
WD30-SE (Repeater 1)
WT30 Slave (Repeater)
WD30-SE (Repeater 1)
WT30 (Slave)
WD30-SE (Slave)
WD30-SE (Repeater 2)
WD30-SE (Slave)
WT30 (Slave)
WT30 (Slave)
WD30-SE (Slave)
WD30-SE (Repeater 3)
- Repeater is up to 3 steps
WT30 (Slave)
WD30-SE (Slave)
- The number of slaves is up to 64 including the
repeater - The number of slaves are limited by
the total I/O size of slave's.
14
FunctionRoaming -- Serial master WT30-M01 --
The Serial master automatically changes the
communication route by using 1 repeater.
PC
Serial Master
Repeater(Only 1 unit in a system)
The frequency channel is used in the same one.
RS232C
2) The communication route is automatically
changed!
3) Wireless master tries to find the slave
via the repeater.
1) If the wireless communication becomes
instability, .
Move
15
Serial Communication on CompoWay/F
Using CompoWay/F, you can monitor the condition
of wireless system.

• - Addition information
• - Input signal at slave
• - The status of wireless slaves
• - The number of times on communication error
• The R.S.S.I of the repeater or the slave
  connected to the master directly.
• - The frequency channel
• - The cycle time of wireless communication
• - The route infomaition
• - Out put signal at slave
• - The I/O size of slave
• - The R.S.S.I of each frequency channel
• The result of the radio monitoring in all
  frequency channels

PC
RS232C
WT30-M01 Serial Master
16
Antenna Series
A suitable antenna for installation features can
be selected. The interference reduction is
possible by the directional antenna.
3 types of antennas
1/2? antenna gain up to 2.14dBi Direction
omunidirectional Connector SMA-P(reverse) Cable
No Wave polarization vertical Impedance 50O
1/2? antenna gain up to 2.14dBi Direction
omunidirectional Connector SMA-P(reverse) Cable
2m coaxial cable Wave polarization
vertical Impedance 50O Others Magnet based
1/2? planar antenna gain up to
2.14dBi Direction 60-60 Connector
SMA-P(reverse) Cable 2m coaxial cable Wave
polarizationvertical horizontal Impedance 50O
17
Product Series
Wireless Units
Type (tentative) Master / Slave Interface Connector
WT30-M01-FLK Serial master RS-232C D-sub 9 pin (Inch screw)
WT30-SID16 I/O slave DC input 16 pts. (NPN,PNP Commonness) Screw less
WT30-SMD16 I/O slave DC input 8 pts. (NPN,PNP Commonness) Transistor output 8 pts. (NPN) Screw less
WT30-SMD16-1 I/O slave DC input 8 pts. (NPN,PNP Commonness) Transistor output 8 pts. (PNP) Screw less
Note The antenna is not attached to the wireless
units.
Option
Type (tentative) Contents Contents
WT30-AT001 Magnet based antennas ( 2 peaces) Magnet based antennas ( 2 peaces)
WT30-AT002 Planar diversity antenna
WT30-AT003 Pencil type antennas ( 2 peaces)
WT30-FT001 Furniture for TH35-7.5
WT30-FT002 Furniture for TH35-15
WT30-FT003 Furniture for surface mount
WT30-FT011 Furniture for the Planar diversity antenna with magnet
WT30-CA2M Extension cable for antenna (2m)
18
Specifications
General specifications
Item Item Serial Master I/O Slave
Power supply Rated voltage DC24V DC24V
Power supply Range of permissible voltage DC20.4 to 26.4V DC20.4 to 26.4V
I/O Power supply (for I/O circuit) Rated voltage DC24V DC24V
I/O Power supply (for I/O circuit) Range of permissible voltage DC20.4 to 26.4V DC20.4 to 26.4V
Ambient operating temperature Ambient operating temperature Input 16 pts. ON -10 to 50 ? Input 10 pts. ON -10 to 55 ? Input 16 pts. ON -10 to 50 ? Input 10 pts. ON -10 to 55 ?
Ambient operating humidity Ambient operating humidity 25 to 85 (with no condensation) 25 to 85 (with no condensation)
??????? ??????? ??????????? ???????????
Ambient storage temperature Ambient storage temperature -25 to 65? -25 to 65?
Protective construction Protective construction IP30 IP30
???? ???? ???????????? (????????????FFKDS/V1- 5.08??????) ????D???9???(??),?????????? (???? XM2F-0910-132??? ???) ?????????? (????????????FFKDS/V1-5.08??????)

19
Specifications
Wireless interface specifications
Item Specifications
Electromagnetic waveform Spread spectrum (direct sequence DS-SS)
Communications method Simplex (half-duplex) operation
Frequency band 2400 to 2483.5MHz
Number of channels 67 (using frequency division)
Antenna power 10mW
Wireless interval data transfer velocity 100kbps
Repeater function Serial Master 1 repeater is available with I/O slave WD30-ME 3 repeaters are available with WD30-SEs
???????????? Min 10 systems
Maximum number of connectable Wireless Slaves 64 slaves max.
Applicable Standards
Area Standards
Japan ARIB STD-T66
U.S.A. FCC part15.247
Europe EN 300 440-2
China
20
END