KEYLESS ENTRY SYSTEMS - PowerPoint PPT Presentation

1 / 12
About This Presentation
Title:

KEYLESS ENTRY SYSTEMS

Description:

keyless entry systems chapter 14 pages 513c - 518c pages 544l - 549l main components control module coded button key pad door lock motors system functions unlocks all ... – PowerPoint PPT presentation

Number of Views:208
Avg rating:3.0/5.0
Slides: 13
Provided by: vocationa6
Category:

less

Transcript and Presenter's Notes

Title: KEYLESS ENTRY SYSTEMS


1
KEYLESS ENTRY SYSTEMS
  • CHAPTER 14
  • PAGES 513C - 518C
  • PAGES 544L - 549L

2
MAIN COMPONENTS
  • CONTROL MODULE
  • CODED BUTTON KEY PAD
  • DOOR LOCK MOTORS

3
SYSTEM FUNCTIONS
  • UNLOCKS ALL DOORS WHEN 3-4 BUTTON IS PRESSSED
    WITHIN 5 SECONDS AFTER CODE ENTERED
  • RELEASES TRUNK LID
  • ACTIVATES ILLUMINATED ENTRY
  • OPERATES IN CONJUNCTION WITH AUTOMATIC LOCKS
    SYSTEM

4
KEY MODULE
  • Controls all functions for Keyless and Autolock
    systems
  • Located in Trunk on Fords
  • On newer cars, built into BCM
  • Code usually on module itself.

5
KEYPAD
  • FIVE NORMALLY OPEN SINGLE POLE, SINGLE THROW
    SWITCHES
  • EACH PAD REPRESENTS TWO NUMBERS
  • LOCATED ON DRIVERS DOOR
  • PROVIDES INPUT TO CONTROL MODULE

CLASS 513
6
LOCK MOTOR
  • USES EITHER SOLENOID OR PERMANENT MAGNET
    REVERSIBLE MOTOR
  • MODULE CONTROLS PM LOCK MOTORS BY REVERSING
    CURRENT

CLASS 363
7
REMOTE OPERATION
  • TRANSMITTER
  • RECEIVER BUILT INTO MODULE
  • ANTENNA
  • SOMETIMES USED WITH ALARM SYSTEM

LAB 549
8
SYSTEM DIAGNOSIS
  • INSURE WHAT SYSTEM YOU HAVE
  • CHECK BASIC LOCK SYSTEM FIRST
  • ROLL DOWN WINDOWS OR KEYS IN POCKET
  • PERFORM FACTORY FUNCTION TEST
  • HIDDEN CODE SOMETIMES ON CONTROLLER MODULE

LAB 548
9
FUNCTION TEST
  • Unlock and lock doors using lock switches
  • Illuminate Keypad
  • Lock doors using keypad
  • Unlock Drivers door using permanent Code
  • Unlock passenger doors using 3/4 key
  • Unlock luggage using 5/6 key
  • Check for Auto Lock function (Through reverse
    gear)
  • Open and close drivers door to check Autolock
  • Open drivers door, key on, trans in drive, turn
    off courtesy lights with door switch using left
    foot

Contd on next slide
10
FUNCTION TEST (CONTD)
  • Key off, trans in park, get out of car, close
    door Press Keypad to turn on illuminated entry.
  • While illuminated entry is on, press 7/8 and 9/0
    simultaneously within 5 seconds of turning on the
    illuminated Entry system
  • Key off, transmission in Park, door closed, lift
    handle to open door, within 25 seconds, get
    inside car and turn ignition switch on
  • Enter Permanent code, within 5 seconds, push 1/2
    (this tells module to accept a alternate code)
  • Unlock all doors using alternate code
  • Disable alternate code. (Follow procedure)

11
CHECK INPUTS AND OUTPUTS
INPUTS
OUTPUTS
  • Door Handles
  • Drivers seat sensor
  • Transmission back up light switch
  • Ignition Switch
  • Electric door lock/unlock switches
  • Keypad
  • Courtesy Light Switch
  • Door ajar switch
  • Keypad illumination
  • Door lock actuating solenoid/motor
  • Trunk lid release solenoid
  • Interior courtesy lights

LAB 547
12
SYSTEM DIAGRAM
Write a Comment
User Comments (0)
About PowerShow.com