Title: Measurement of Landslide Movement with 3D Laser Scanner
1Measurement of Landslide Movement with 3D Laser
Scanner
ASANO, Hiroki Erosion and Sediment Control
Research Group Public Works Research Institute
2Contents
- Most observation techniques and problem
- Outline of 3D Laser Mirror Scanner
- Attempt of landslide movement measurement
- with 3D Laser Scanner
- Result of movement measurement
- Summary
3When landslide calamity occurs
Based on the site situation and the observation
value (ground expansion and contraction meter
etc.).
The judgment is demanded promptly. Appropriate
measures is demanded.
Hard measuresFirst aid restoration
worker Software measures Precaution and shelter
recommendation
4Observation technique at calamity suddenly
- Watch with CCD cameras
- Watch with ground expansion and contraction meter
5Concept chart of watch at calamity
6Ground expansion and contraction meter
Storage box
crack
Paling
7Principle of ground expansion and contraction
meter
Record pen
Inn bar line
Rotation of drum
Movement of landslide
Recording paper
8Drum of ground expansion and contraction meter
9Example of setting up ground expansion and
contraction meter
10Insufficient point of ground expansion and
contraction meter
- The installation and the measurement are
difficult in the place with danger. - It takes time for the installation (The expansion
and contraction meter is one/day). - The installation and the observation at nighttime
are difficult.
11Measurement image of 3D scanner
landslide
laser scanner
123D Laser Scanner
13Composition of 3D laser scanner
? range finder electronics of the 3D scanner
LMS-Z210 ? laser beam ? rotating polygon ?
slow scan ("frame scan") ? ECP compatible LPT
printer port ? PC ? software
14Outline of 3D laser scanner
- Measurement range2 350, reflectivity gt 80
Measurement accuracy/- 2.5 cm, - in the worst case /- 10 cm
- Range which can be measured 80300 total
- Beam divergenceapprox. 3 mrad
- Eye safetyClass 1 for the scanned beam
15Characteristic of 3D laser scanner
- The pulse of the laser beam is launched
repeatedly at very short intervals of time. - Each pulse reflects, the time to returning is
measured, and the distance is measured. - The direction of the laser beam is changed and
three-dimensional shape is scanned. The
measurement principle is the same as the machine
and the total station etc. of a general light
wave measurement. - A new part is technically a method of scanning
- It is possible to measure without setting up the
reflection mirror .
16laser pulse
t
t
t
laser scanner
L
?t
Lc ?t (??)
17mirror
laser pulse
laser scanner
18laser scanner
19laser scanner
20laser scanner
Extension angle of 3mrad
21The measurement data displayedto
personal-computer
22Computational graphic
23Computational graphic
24Landslide measurement which uses 3D laser scanner
- Geographical features measurement of landslide
?Making of DEM(digital elevation model)
?Making of topographical map - Measurement two or more times
- ?Grasp of displacement situation
- Making of vector chart
- Grasp of range of landslide movement
25laser scanner
Overlapping the data is difficult if there is no
points in evaluation.
Z
X
Y
26point(X,Y,Z)
point (X,Y,Z)
laser scanner
Z
X
Y
27point (X,Y,Z)
point (X,Y,Z)
laser scanner
laser scanner
Z
X
Y
28Reflection seal
29Situation of measurement
30laser scanner
Landslide
Range of measurement (top and bottom) 40
(right and left )85
31Procedure of the measurement data analysis
?The data measurement
?The point data making
?Making of TIN model
?Movement amount calculation
?Plan and section chart making
32Vector chart
33Frequency distribution of measurement error
3411?16?
11?24?
??????
35Landslide movement range chart
36Summary
- ?7cm or less roughly against the amount of the
movement of 15-20cm. - ?The respect grasp of the range of the movement
was possible because of overlapping the
topographical map before and behind the movement
amount. - ?The examination is scheduled to be advanced for
the improvement of the accuracy in the future.
37Finished
- Thank you for your attention.