Motorola gp2009 manual ????gp2009???

1
Motorola gp2009 manual????gp2009???
2
Installation and removal of antenna
???????
1. The bottom of the thread of the antenna into
the antenna coupling, antennaFasten to the
transceiver. ????????????????,??? ???????? 2.
Clockwise until tighten ????????????
??
Until it is disengaged from the walkie-talkie on
the counter-clockwise rotating antennaDetachment.
???????????????????? ??
3
Installation and removal of the battery ???????
Installing the battery ????1.A slot of the
battery into the notch of the walkie-talkie. ????
??????????2 slide-phone battery until you hear
a "click" sound. ????????????????

• Removing the Battery
• ????
• 1 battery card allocated from the
  transceiver
• ???????????
• Slide the battery down
• 2. ??????

4
Installation and removal of the belt clip
????????

• Install the belt clip
• ?????1.Adjust the belt clip slot at the
• Installation on the walkie-talkie batteryTrack.
• ????????????
• ?????????
• 2.Slide down the belt clip
• until you hear a clicking sound.
• 2. ??????????????

Removing the belt clip ?????In the demolition
button and walkie-talkie back of the battery
between the end of the key inserted. Up the
proposed demolition button. Slide the
belt. ??????????????????????? ???????????????
5
Charge for walkie-talkie??????
1.A turn off the intercom and to the charger's DC
power supply. (Such as walkie-talkie and
electricalSources are open)2. the transceiver
into the charger socket.3.Open the DC power
charger.4.Open the DC power supply.5
walkie-talkie charge until the charger LED
indicator lights up in green(About two hours
later).6.Open walkie-talkie, when charging is
completed, you will see the battery
indicatorDisplays three power bar.
1. ????????????????(?????? ????)2.
???????????? 3. ???????????4. ??????? 5.
????????????LED????????(???????)? 6.
?????,??????,?????????? ???3 ???????
6
Programming port and mode of???????
Programming modeThis mode allows you to enhance
the use of walkie-talkie function by changing the
characteristic parameters of the walkie-talkie.
Enter the programming modeIf the transceiver
is turned on, shut down. Then press and hold the
listener the key to power. Hear a tone after you
in the walkie-talkieProgramming mode. K
indicator lights up, then displays the RW, Exit
the programming Mode. Shutdown exit the
programming mode.
???? ??????????????????????????????? ?????? ??????
???,??????????????????????, ??????????????K?????,?
???RW?
7
Scan and priority scan???????
Scan There are two types normal scan and
priority scan. Ordinary scanning continuous
retrieve the walkie-talkie channel in the scan
list, priority scan 50 of the scan time
assigned to the priority channel(A channel in
the selected scan list) ????????????????? ???????
??????????????,??????50 ???????? ????(???????????
?????)
8
Preset programming functions??????
Button type ???? A key A? B key B? C key C? D key D?
Short-term keys ????? Power Selection ???? Squelch level ???? PL / DPL to start PL/DPL?? Scanning ??
Long keys ????? PTT ID starts PTT ID ?? Phone mode ???? The keypad lock ???? Spurious letter Tao delete ??????
9
Dial??
A telephone conversationAfter the call is
connected, the way of normal use of walkie-talkie
call. Speech, press the PTT key, release the PTT
key to answerSend a voice call1. Press and hold
the PTT key.2.Dial the required selective call
ID.3.Release the PTT key.
???? ??????,??????????????? ??PTT
???,??PTT??? ?????? 1.??PTT?? 2.??????????? 3.??PT
T??
10
Thanks for reading!????!