Title: Numerical Weather Prediction and Data Assimilation
1Numerical Weather Prediction and Data Assimilation
- David Schultz, Mohan Ramamurthy, Erik Gregow,
John Horel
2What is a model?
- Resource Kalnay, E., 2003 Atmospheric Modeling,
Data Assimilation and Predictability - model tool for simulating or predicting the
behavior of a dynamical system such as the
atmosphere - Types of models include
- heuristic rule of thumb based on experience or
common sense - empirical prediction based on past behavior
- conceptual framework for understanding physical
processes based on physical reasoning - analytic exact solution to simplified
equations that describe the dynamical system - numerical integration of governing equations by
numerical methods subject to specified initial
and boundary conditions
3What is Numerical Weather Prediction?
- The technique used to obtain an objective
forecast of the future weather (up to possibly
two weeks) by solving a set of governing
equations that describe the evolution of
variables that define the present state of the
atmosphere. - Feasible only using computers
4A Brief History
- Recognition by V. Bjerknes in 1904 that
forecasting is fundamentally an initial-value
problem and basic system of equations already
known - L. F. Richardsons (1922) attempt at practical
NWP - Radiosonde invention in 1930s made upper-air data
available - Late 1940s First successful dynamical-numerical
forecast made by Charney, Fjortoft, and von
Neumann - 1960s Edward Lorenz shows the atmosphere is
chaotic and its predictibility limit is about two
weeks
5NWP System
- NWP entails not just the design and development
of atmospheric models, but includes all the
different components of an NWP system - It is an integrated, end-to-end forecast process
system
6Data Assimilation
7Components of an NWP model
- 1. Governing equations
- Fma, conservation of mass, moisture, and
thermodynamic eqn., gas law - 2. Numerical procedures
- approximations used to estimate each term
(especially important for advection terms) - approximations used to integrate model forward
in time - boundary conditions
- 3. Approximations of physical processes
(parameterizations) - 4. Initial conditions
- Observing systems, objective analysis,
initialization, and data assimilation
8Model Physics
- Grid-scale precip. (large scale condensation)
- Deep and shallow convection
- Microphysics (increasingly becoming important)
- Evaporation
- PBL processes, including turbulence
- Radiation
- Cloud-radiation interaction
- Diffusion
- Gravity wave drag
- Chemistry (e.g., ozone, aerosols)
9Grid spacing (resolution) defines the scale of
the features you can simulate with the model.
10Good Numerical Forecasts Require
- Initial conditions that adequately represent the
state of the atmosphere (three-dimensional wind,
temperature, pressure, moisture and cloud
parameters) - Numerical weather prediction model that
adequately represents the physical laws of the
atmosphere over the whole globe
11Sources of error in NWP
- Errors in the initial conditions
- Errors in the model
- Intrinsic predictability limitations
- Errors can be random and/or systematic errors
12Sources of Errors - continued
- Initial Condition Errors
- Observational Data Coverage
- Spatial Density
- Temporal Frequency
- Errors in the Data
- Instrument Errors
- Representativeness Errors
- Errors in Quality Control
- Errors in Objective Analysis
- Errors in Data Assimilation
- Missing Variables
- Model Errors
- Equations of Motion Incomplete
- Errors in Numerical Approximations
- Horizontal Resolution
- Vertical Resolution
- Time Integration Procedure
- Boundary Conditions
- Horizontal
- Vertical
- Terrain
- Physical Processes
Source Fred Carr
13Given all these assumptions and limitations, we
have no right to do as well in forecasting the
weather as we do!
Dave sez
- What other disciplines forecast the future with
as much success as meteorology?
14NWP in Finland
- Currently, NWP models are run by FMI (limited
domain over Europe) and by the European Centre
for Medium-Range Weather Forecasts (global) - Currently the FMI model is run at about 9 22 km
and the ECMWF model is run at 25 km grid spacing,
meaning that these models can resolve features
about 6 times those grid spacings. - The new AROME experimental model is running at
2.5 km grid spacing.
1522 km HIRLAM 9 km HIRLAM 2.5 km AROME
16 9 km HIRLAM 2.5 km AROME observed radar
reflectivity
17 9 km HIRLAM 2.5 km AROME
18The Hopes of the Testbed
- Higher-resolution observations will provide
higher-resolution initial conditions, which could
be put into a higher-resolution NWP model,
producing higher-resolution forecasts. - The hope is that precise forecasts of convection,
the sea breeze, rain/snow forecasting, and winds
could be made up to a few hours in advance. - BUT
19Difficulties Lie Ahead
- The reality is often that you end up with a
higher-resolution, less-accurate forecast. - Results from forecasting/research experiments at
the NOAA/Storm Prediction Center show value can
be added sometimes with high-resolution
forecasts. - When that value can be added is a very important
forecasting/research question!!!
20Difficulties Lie Ahead
- Producing the initial conditions from sparse
resolution (in space and time) and incomplete
observations is not easy. - Creating a gridded 3-D/4-D dataset suitable for
initializing a NWP model is called data
assimilation. - How it is proposed to be done in the Helsinki
Testbed is described next
21Erik Gregow Project Manager LAPS
22- Numerical weather prediction model that
adequately represents the physical laws of the
atmosphere over the whole globe - Initial conditions that adequately represent the
state of the atmosphere (three-dimensional wind,
temperature, pressure, moisture and cloud
parameters)
23Good Numerical Forecasts Require
- Numerical weather prediction model that
adequately represents the physical laws of the
atmosphere over the whole globe - Initial conditions that adequately represent the
state of the atmosphere (three-dimensional wind,
temperature, pressure, moisture and cloud
parameters)
24Monitoring Current Conditions
September 6 20GMT
A D A S
25Potential Discussion Points
- Why are analyses needed?
- Application driven data assimilation for NWP
(forecasting) vs. objective analysis (specifying
the present, or past) - What are the goals of the analysis?
- Define microclimates?
- Requires attention to details of geospatial
information (e.g., limit terrain smoothing) - Resolve mesoscale/synoptic-scale weather
features? - Requires good prediction from previous analysis
- Whats the current state-of-the-art and whats
likely to be available in the future? - Deterministic analyses relative to ensembles of
analyses (ensemble synoptic analysisGreg
Hakim) - How is analysis quality determined? What is
truth? - Why not rely on observations alone to verify
model guidance?
26Observations vs. Truth
- Truth? You cant handle the truth!
- Truth is unknown and depends on application
expected value for 5 x 5 km2 area - Assumption average of many unbiased observations
should be same as expected value of truth - However, accurate observations may be biased or
unrepresentative due to siting or other factors
27Whats an appropriate analysis given the
inequitable distribution of observations?
Case 3
Case 2
Case 1
?
?
x
?
x
x
grid cell
observation
28Whats an appropriate analysis given the variety
of weather phenomena?
Elevated Valley Inversions
Front
O
?
O
?
?
O
O
O
O
z
T
29 Analyses vs. Truth
Analysis value Background value observation
Correction
- An analysis is more than spatial interpolation
- A good analysis requires
- a good background field supplied by a model
forecast - observations with sufficient density to resolve
critical weather and climate features - information on the error characteristics of the
observations and background field - good techniques (forward observation operators)
to transform the background gridded values into
pseudo observations - Analysis error relative to unknown truth should
be smaller than errors of observations and
background field - Ensemble average of analyses should be closer to
truth than single deterministic approach IF the
analyses are unbiased
30Truth Continuum vs. Discrete
Truth is unknown Truth depends on application
Temperature
Truth
West
East
31Discrete Analysis ErrorGoal of objective
analysis minimize error relative to Truth not
Truth!
Temperature
Truth
West
East
32ADAS
- Near-real time surface
- analysis of T, RH, V
- (Lazarus et al. 2002 WAF
- Myrick et al. 2005 WAF
- Myrick Horel 2006 WAF)
- Analyses on NWS GFE
- grid at 5 km spacing
- Background field RUC
- Horizontal, vertical anisotropic weighting
33Description In the following slides,
temperature results from LAPS/MM5 analysis are
shown. The objective is to compare a normal MM5
analysis with LAPS/MM5 analysis, also verify
against some observations that are not included
into the LAPS analysis Input to LAPS analysis is
here - MM5 9-km resolution (input to MM5 is
ECMWF 0.35 deg) - 52 surface observations from
HTB area
34MM5 analysis Temperature at 9 m height, with 1
km resolution The analysis is based on 0.35
degree boundary fields from ECMWF operational
analysis.
09 Aug 2005,15 UTC
35MM5 analysis Temperature at 9 m height, with 1
km resolution Verification The figures, within
the plot, are measurements from certain stations
not included in the LAPS analysis
09 Aug 2005,15 UTC
36LAPS/MM5 analysis Temperature at 9 m height,
with 3 km resolution Verification The figures,
within the plot, are measurements from certain
stations not included in the LAPS analysis
09 Aug 2005,15 UTC
37LAPS/MM5 analysis Temperature at 9 m height,
with 1 km resolution Verification The figures,
within the plot, are measurements from certain
stations not included in the LAPS analysis
09 Aug 2005,15 UTC
38LAPS/MM5 analysis Temperature at 9 m height,
with 1 km resolution Verification The figures,
within the plot, are measurements from certain
stations which are not
included in the LAPS analysis
09 Aug 2005,15 UTC
39Data Assimilation Surprises
- Torn and Hakim (unpublished) have applied an
ensemble Kalman filter for several hurricanes to
determine the most sensitive regions for
forecasts in the western Pacific Ocean. The
largest sensitivities are associated with
upper-level troughs upstream of the tropical
cyclone. Observation impact calculations indicate
that assimilating 40 key observations can have
nearly the same impact on the forecast as
assimilating all 12,000 available observations. - Sensitivity of the 48 hour forecast of tropical
cyclone minimum central pressure to the analysis
of 500 hPa geopotential height (colors) for the
forecast initialized 12 UTC 19 October 2004.
Regions of warm (cold) colors indicate that
increasing the analysis of 500 hPa height at that
point will increase (decrease) the 48 hour
forecast of minimum central pressure. The
contours are the ensemble mean analysis of 500
hPa height.
40More Data Assimilation Woes
- Adaptive observations collecting data where the
forecast is most sensitive - Sometimes assimilating more data produces a worse
forecast (Morss and Emanuel) - Heretical thought What if none of the hundreds
of observations from the Helsinki Testbed made
any difference to the forecast?
41Challenges Ahead for Testbed/LAPS
- The Testbed only samples the lower troposphere at
best, not the mid and upper troposphere. - Weather phenomena, even adequately sampled by the
Testbed data, will move out of the Testbed domain
within an hour or two. - Weather phenomena inadequately sampled by the
Testbed data will move into the domain and screw
up your forecast. - Predictability of mesoscale weather features is
unknown. - All of this assumes a perfect model.
42Challenges Ahead for Forecasters
- Determinism is deadlong live probabilistic
forecasting! - High-resolution model output cannot be
interpreted the same way as a coarser-resolution
model output. - Forecasters need to be retrained.
- Communication of high-resolution forecasts to end
users is not simple (i.e., you cannot just send
raw model output to users and expect them to use
it). - This ensures jobs for good forecasters in the
future.