Wave Optics - PowerPoint PPT Presentation

1 / 49
About This Presentation
Title:

Wave Optics

Description:

Particle or wave? Wave Optics Interference and other Mysteries Explained You Predict What happens when a pitcher throws lots of fastballs at two holes? – PowerPoint PPT presentation

Number of Views:341
Avg rating:3.0/5.0
Slides: 50
Provided by: phild47
Category:
Tags: optics | wave

less

Transcript and Presenter's Notes

Title: Wave Optics


1
Wave Optics
Particle or wave?
  • Interference and other Mysteries Explained

2
You Predict
  • What happens when a pitcher throws lots of
    fastballs at two holes?
  • What pattern do you see on the wall beyond?

3
Predict This
  • What happens when a beam of light goes through
    two tiny slits?
  • What pattern do you expect on the screen beyond?

4
Double Slit Interference Applet
  • What if light from two slits interferes?
  • http//www.ece.gatech.edu/research/ccss/education/
    Java/1998.Winter/Projects/pierce-woods/project/bin
    /projApp.htm
  • Experiment performed by Young in 1801
  • Convincing evidence for wave nature of light
  • Another Double Slit Applet

5
Double Slit Derivation
  • http//noether.physics.ubc.ca/Teaching/Physics101/
    StudySheets/Double.html

6
Understanding Path Difference
  • dsinq Dd is the path difference for waves
    traveling to a given point on the fringe pattern
  • If path difference is an integer number of
    wavelength, interference is constructive
  • (bright fringe)
  • If path difference is a half integer number of
    wavelengths, interference is destructive
  • (dark fringe)

7
Line Spacing
  • d sinq ml m 0, 1, 2 constructive
  • d sinq (m 1/2) l m 0, 1, 2 destructive
  • x Lq Lml/d for bright fringes
  • using sinq q q in radians

x
q tanq x/L
q
d
L
8
What Will Happen to the Fringe Spacing
  • x Lml/d
  • if the wavelength increases?
  • if the distance to the screen increases?
  • if the slit width increases?

9
Find l
  • x Lml/d
  • l dx/Lm 6.12 x 10 7 m 612 nm
  • x 2.5 mm
  • L 2.6 m
  • d 0.6 mm
  • l 5.78 x 10 7 m 578 nm

10
Varying the Slit Separation
Courtesy of Siltec Ltd. http//www.infoline.ru/g23
/5495/Physics/English/feedback.htm
11
  • x Lml/d
  • lxd/L for adjacent fringes 4x10-3 x 5x10-4

  • 2.6
  • 7.7 x 10-7 770 nm

12
Problem
  • When white light passes through two slits 0.50mm
    apart an interference pattern appears on a screen
    2.5m away. The fringe separation is 2.5 mm for
    the violet light. Find the wavelength of this
    light.

Hint solve x Lml/d for l
L dx/mL dx/L 5.0 x 10-7 m 500nm
13
Single Slit Interference
  • Also called diffraction
  • Fringes are larger
  • Size of fringes decreases out from center of
    pattern
  • Derivation http//oldsci.eiu.edu/physics/DDavis/11
    60/Ch25WO/Diff.html

14
Homework
  • Ch 24 Problems
  • 3,5,7,9,10(613 nm), 11

15
More On Single Slit Interference
  • Pattern dominated by central maximum
  • Called central diffraction maximum
  • Width measured from minimum to minimum
  • Twice as wide as other fringes
  • Much brighter than other fringes

16
Single Slit Diffraction- Varying the Slit Width
  • Fringes get bigger as slit gets smaller

17
Double Slit vs. Single Slit
  • Double
  • d sinq ml bright
  • d sinq (m 1/2) l
  • Dark
  • modest central maximum
  • m0,1,2,etc
  • Single
  • d sinq ml dark
  • d sinq (m 1/2) l
  • bright
  • Dominant central maximum
  • Fringes usually larger
  • m1,2,3, etc

18
Single Slit Problem
  • 500 nm light is incident on a slit of width 0.001
    mm which is 1.0 m from a screen. Find the width
    (2q ) of the central diffraction maximum. (hint
    use dsinq ml )
  • 60 degrees

19
Dispersion
  • Spreading of white light into spectrum of
    wavelengths

20
Why Dispersion Occurs
  • Index of refraction, n, depends on wavelength l
  • Typically n decreases as l increases
  • Exit angle from prism depends on l

White light
21
Forming a Rainbow
  • Java Applet

22
Diffraction Gratings
  • Diffraction Grating has thousands of lines per cm
    cut into glass plate
  • Light from each slit interferes with light from
    all other slits
  • Analysis like Double Slit
  • Sin q ml/d principal maxima (bright)
  • Lines very close so maxima occur at large angles
  • Q 900 is maximum possible so only a few maxima
    (orders)exist

23
Courtesy http//fermi.bgsu.edu/stoner/P202/interf
ere/sld015.htm
24
(No Transcript)
25
Grating Set-Up
  1. Mercury lamp
  2. Spectrometer
  3. Gratings

Courtesy http//physics.okstate.edu/courses/experi
ments/o5.html
26
How Grating Works in Practice
  • Purpose is to analyze spectrum of light from
    source such as unknown gas or a star

27
Spectrum Produced by Grating
28
Diffraction Grating Problem
  • A grating contains 5000 lines per cm
  • Find the slit separation (d) in meters
  • 500 nm light is incident on the grating.
  • At what angles will the first, second and third
    orders be observed? Is there a fourth order?
  • Hint use Sin q ml/d

2 x 10-6 m
0.5x10-6m/2x10-6
m1 14.40 m2 300 m3 48.60 m4
900 not visible
29
Thin Film Interference
Let film thickness t
Assume no net phase change on reflection
2t ml m0, 1, 2 Condition for bright
2t (m1/2) l Condition for dark
For one hard reflection 2t ml becomes condition
for dark
30
Complication 1Soft and Hard Reflections
  • SOFT
  • beam exits higher n material
  • No phase shift on reflection
  • HARD
  • beam enters higher n material
  • Phase shift of l/2 on each reflection

Air n1.0
Coating n1.38
Glass n1.52
31
Complication 2What Wavelength to Use
  • Use ln l/n where n is the index of refraction
    in the medium where refraction occurs (the film)
  • Example green 500nm light leaves air and enters
    a thin layer of oil n1.25 floating on water.
    What wavelength should be used to find the
    minimum thickness of oil for the oil to appear
    green?

ln l/1.25 500nm/1.25 400nm
32
Oil On Water
How many hard reflections are there? What is the
total phase shift due to reflections?
1
l/2 180
What l should you use?
ln l/1.50
Courtesty of http//physics.bu.edu/duffy/PY106/Di
ffraction.html
33
What Really Happens
This shows why the wavelength must be divided by
n in the film to get the two reflected waves to
interfere completely destructively
34
Anti-reflective Coating
35
Problem
  • A coating of MgF on glass has an index of
    refraction of 1.38. What is the minimum
    thickness of this coating to prevent reflection
    of 550 nm light?

2t (m1/2) ln For m 0 t ln/4
tl/1.38/4
t 100nm
36
Puzzle
  • If the two reflected beams interfere
    destructively, what happens to their energy?

It is transmitted! Thats the point of an
antireflective coating.
37
Multi Coating
Super-Multi-Coating (SMC) - Pentax's unique seven
layer coating applied to each lens element of the
lens to increase light transmission, increase
color saturation and to help prevent flare.
38
Polarization
  • Intensity varies as polarizer is rotated

Courtesy Siltec Ltd.
39
Polarization
In linear Polarization light vibrations become
confined to a single linear plane
Courtesy of 3M Corporation
40
Polarization Analogy
41
Two Polarizers
  • What will happen if the polarized beam hits
    another polarizer rotated 900 from the first?

42
Propagation of a Linearly Polarized
Electromagnetic Wave
Animation Courtesy Siltec Ltd. http//www.infoline
.ru/g23/5495/Physics/English/feedback.htm
43
(No Transcript)
44
(No Transcript)
45
Courtesy http//webug.physics.uiuc.edu/courses/ph
ys112/summer97/lectures/lect24/sld014.htm
46
n c/v
47
(No Transcript)
48
(No Transcript)
49
Link to Interference Applet
  • In ripple tank
  • link
Write a Comment
User Comments (0)
About PowerShow.com