Title: Electrical Fundamentals
1Electrical Fundamentals
2Board of INSURV on USS TrentonFirst Electrified
Naval Ship
3REFERENCES
- NSTM 300 ELECTRIC PLANT GENERAL
- NAVEDTRA 14344 ELECTRICIANS MATE
- NSTM 310 GENERATORS/ CONVERSION EQUIP
- NSTM 320 DISTRIBUTION SYSTEMS
- NEETS MOD 14173 INTRO TO DIRECT CURRENT
- NEETS MOD 14174 INTRO TO AC CIRCUITS
4TERMINAL OBJECTIVE
- DESCRIBE and EXPLAIN the function and theory
of shipboard electricity and its role in the
electrical distribution system.
5ENABLING OBJECTIVES
- State the basic units of measure, symbols or
abbreviations for various electrical terms. - Define Ohms law
- State the three requirements for electromagnetic
induction - Define the types of AC power
- Describe the internal parts of a generator
6More Objectives
- State the functions of a governor and a voltage
regulator - Explain the theory of operation of transformer
action - Explain a real ungrounded electrical system
- Describe Selective and Selected Tripping
7Starring The ATOM
8VOLTAGE Electrical Pressure
- 3 Factors necessary to produce an AC Voltage
- Conductor
- Magnetic Field
- Relative motion between the two
9Current - What is it?
- Voltage and Complete Path Needed
- Movement of Electrons Past a Given Point
(Measured in AMPS) - 1 Coulomb in 1 sec. past a given point 1 AMP
- Coulomb 6.28 x 1018 electrons
10RESPECTNOT FEAR
- .001 Amps Tingling Sensation (Shock Felt)
- .01 Amps Clutching Current
- .1 Amps May be Fatal
11OHMs LAW
Voltage Current Resistance
EIR
or
IE/R RE/I
12In SERIESthe Law Is
- Current (I) is COMMON throughout
- Resistance (R) is ADDITIVE
- Voltage (E) is ADDITIVE
13The Basic SERIES Circuit
14In PARALLEL, the Laws are Different
- VOLTAGE (E) is COMMON in every branch
- CURRENT (I) is Additive
- The TOTAL circuit RESISTANCE (R) is LESS than any
one Branch!
15How much total Current?How much total Resistance?
16Shorts Opens
- Electrical SHORT Minimal Resistance
- Electrical OPEN Infinite Resistance
17INDUCTANCE AND CAPACITANCE
- INDUCTOR Opposes CHANGE in CURRENT
- (Measured in Henrys)
- CAPACITOR Opposes CHANGE in VOLTAGE
- (Measured in Farads)
- The COMBINED Opposition is called Reactance
and measured in OHMS
18INDUCTOR
19Current Limiter in circuit
20INDUCTOR Friend or Foe?
21CAPACITOR
22Theory of Operation
23Nothin To Play With!
24Use a Shorting ProbeNot your Fingers, Stupid!
25So what are they good for?
26POWER
- RATE at which work is being done
- Power Current x Voltage
- (Measured in WATTS)
- FYI 1 Horse Power 746 Watts
27POWER (Cont)
True - Power that actually does work. (KW
Meter) Reactive - Power used by reactive
elements. (KVAR - not useful) Apparent
combination of Ptrue and Preactive Power.
28Power Factor (PF)
- Ratio of TRUE Power (Wattmeter), to APPARENT
Power (KVA Ammeter x Voltmeter). - .8 PF is Standard on Naval Ships
- Identifies Power Lost due to Reactive Elements
- TP KW POWER FACTOR
- AP KVA
29Leading or Lagging?
- Current LAGS Voltage in predominantly
Inductive Circuits - Current LEADS Voltage in Capacitive Circuits
- Ships have more cabling (wires) than capacitors
and therefore have a LAGGING Power factor.
30ELI the ICE Man
31The World of Electromagnetic Induction AC baby!
32Single Phase Alternating Voltage
Frequency Cycles/sec Hertz (Hz)
One Cycle
Voltage
Time
33Frequency Calculation
- Dependant on number of POLES, and SPEED of the
rotor (prime mover RPM) - F n x s
- 120
- F Frequency N Number of Poles
- S Speed (RPM) of Rotor
- 120 standard formula constant
34I need more Power Scotty!
35(No Transcript)
36(No Transcript)
37Armature Reaction Cant Stop It
38Ships Service Switchboards
- Number and location varies from ship to ship,
usually two or more - Placed as far apart as feasible
39Switchboard
40EPCP operation
- Remote operations
- Allows the operator
- Start and stop generators
- Monitor electrical plant
- Parallel generators
41Ground Detector Lights
- Indicates presence of a low insulation resistance
- Three lamps and test switch
- Normally illuminated
- Faulty phase will be indicated by a dark lamp
when in test position
42A Phase Ground Indication
43Ground Detector Operation
- Only works when the test button is pushed
- Must see lights flicker when pressing test button
- Grounds dont go through transformers
- Light must be out
44Without a Ground
45With a Ground
46Isolating a Ground
- WATCH STANDERS ACTIONS
- OBTAIN PERMISSION FROM EOOW (via CHENG, via CO)
- SPLIT ELECTRICAL BUS TO ISOLATE SWITCHBOARD TO
LOCALIZE GROUND - RE-PARALLEL ELECTRICAL BUS
- SECURE BREAKERS ON AFFECTED SWITCHBOARD ONE AT A
TIME UNTIL GROUND GOES AWAY - NON-VITALS FIRST
- LIKELY DEVICES - GALLEY EQUIPMENT, EQUIPMENT THAT
WAS RECENTLY PLACED ONLINE
47TRANSFORMERS
48Transformer Theory
- Transfers AC Power from one circuit to another by
Electromagnetic Induction - FREQUENCY is not changed
- No Moving Parts
49XFMR Construction
- Consist of PRIMARY and SECONDARY Windings
- May be Step-Up or Step-Down
- Determined by Turns ratio of Primary and
Secondary Windings
50GROUNDS ON 115V SYSTEM
51(No Transcript)
52Selective Tripping
Designed into the system
Protective device closest to a fault trips
Protects the rest of the system
53Selective Tripping
54SELECTED TRIPPING
Is manually controlled by the operator. This form
of isolation is usually reserved for ground
isolation or equipment trouble- shooting.
Normally supervised by the EOOW.
55What IS a Real Ungrounded System?
- No Ground Conductors
- No Neutrals
- All Hots
- In THEORY, one could touch a live conductor and
not get shocked, since there is no return path
for current.but JUST in THEORY!
56(No Transcript)
57(No Transcript)
58 ANY QUESTIONS?
59??????????
- What are the 3 requirements for Electro-Magnetic
Induction? - What is OHMS Law? What is the Power Formula?
- What is Power Factor?
60More of the Same.
- What is Inductance and Capacitance?
- What tool do we use to discharge a Capacitor?
- What is the frequency formula?
61And Lastly
- What is selective tripping?
- What is armature reaction and how does our
generation system compensate for it? - What is effective capacitance?
62Electrical Fundamentals Review