CCUM Tests and DCU Calibration

1
CCUM Tests and DCU Calibration

• STATUS REPORT

2
Setup and Avaibility

• Electrical FEC with PMC carrier

• CCU/DCU test main board

• 2D Barcode Scanner

• FLUKE189 multimeter T sensor

• TEC and TIB CCUs

Pickup from PETAL test setup
TOB use IR Thermometer
3
CCU test and DCU Calibration main board
DCU reference
CCU Board
DCU (to calib)
CCUM
4
CCUs avaibility and report

• 900 CCU-TEC

• 700 CCU-TIB

• not tested (to be _at_ Strbg)
• ?

• Tested _at_ CERN
• Separated in 5 groups _at_ Strbg
• CCU adresses defined

(0x3F, 0x5F, 0x6F, 0x77, 0x7B)
5
CCUM TEC Identification 2D Codebars

• type description barre code
• 04 CCU-TEC-F0 302 5200 04 00001
  petals F in end cap n 0
• 
  302 5200 04 00200
• 05 CCU-TEC-F1 302 5200 05 00201
  petals F in end cap n 1
• 
  302 5200 05 00400
• 06 CCU-TEC-B0 302 5200 06 00401
  petals B in end cap n 0
• 
  302 5200 06 00600
• 07 CCU-TEC-B1 302 5200 07 00601
  petals B in end cap n 1
• 
  302 5200 07 00800
• 08 CCU-TEC-DOM 302 5200 08 00801
  CCU-TEC-DOM
• 
  302 5200 08 01000

6
DCU Calibration Procedure for TEC/TIB

• ADC
• a. Apply Vref_j (J1..4) to DCU Channel
  2 or Channel 3
• b. Read DCU Channel 2 or Channel 3
• c. Evaluate Gain and Offset (Vin G
  ADCout D)
• I20µA
• a. Read DCU_Channel 0
• b. Evaluate I20µA
• I10µA
• a. Read DCU_Channel 1
• b. Evaluate I10µA
• Temperature Sensor
• a. Read DCU_REF_channel 7
• b. Read DCU_channel 7

TIME PROCESS 10 min / CCUM-DCU board
7
CCU and DCU in DATABASE XML file

• Codebare
• CCU Address
• Tool_Id 2403
• DCU_Id (_H, _M, _L)
• Gain (G in µV/ADC) and Offset (D in µV)
• I 20µA and I 10µA
• Channel 7 ( DCU Sensor) both DCU
• T (external) both DCU
• Offset (D in C)