MARTEM AS

1
MARTEM AS

• MARTEM AS is specialized in SCADA systems
  development and implementation
• Trademarks TELEM and MARTEM were registered in
  1991
• Since 1998 MARTEM is the member of Estonian
  Chamber of Commerce and Industry (ECCI)
• In March 2000 MARTEM received ISO9001 quality
  certificate

2
MARTEM AS

• TELEM is a trademark of full scale SCADA solution
  
• TELEM is designed for use in technological
  systems in different industries and different
  scale
• TELEM software solution is built on modern
  industry standards and standard interfaces

3
MARTEM AS

• Telem can be used in high and low voltage
  electric power distribution networks, water and
  gas utility networks
• Today TELEM SCADA system is used in 26 companies
  and more than 400 power distribution network
  substations in Estonia and also in Latvian and
  Lithuanian electric power networks

4
TELEM SCADA in operation

• Estonian Energy Distribution Network regional
  centers
• 1.      Veskimetsa-Regional center
• Contract No. 12/99, beginning of works
  23.11.1999- completed 15.02.2000
• Software- GATEWAY
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
• 2.      Tallinn - Regional center
• Contract No. 04/93, beginning of works May 1993-
  completed 30.10.1993
• Contract No. 05/93, beginning of works March
  1993- completed 15.12.1993
• Contract No. 01/94, beginning of works April
  1994- completed 15.07.1994
• Contract No. 03/95, beginning of works May 1995-
  completed 31.12.1995
• Contract No. 04/95, beginning of works May 1995-
  completed 01.09.1995
• Contract No. 02/96, beginning of works January
  1996- completed 31.01.1996
• Contract No. 08/98, beginning of works
  01.07.1998- completed 15.12.1998
• Contract No. 01-02/99, beginning of works
  26.01.1999- completed 01.05.1999
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server

5

• 1.      Paide- Regional center
• Contract No. 02/93, beginning of works
  20.01.1993- completed 30.05.1993
• Contract No. 10/96, beginning of works
  08.11.1996- completed 01.02.1997
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 2.      Tapa- Regional center
• Contract No. 03/97, beginning of works
  09.06.1997- completed 01.12.1997
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 3.      Pärnu- Regional center
• Contract No. 01/95, beginning of works
  09.03.1995- completed 30.06.1995
• Contract No. 07/96, beginning of works
  12.06.1996- completed 01.10.1996
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 4.      Jõgeva - Regional center
• Contract No. 04/96, beginning of works
  28.03.1996- completed 01.11.1996
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
•  

6

• 1.      AS Narva Elektrivõrk- Electric Network
  Enterprise
• Contract No. 04/99, beginning of works
  01.03.1999- completed 01.07.1999
• Contract No. 07/99, beginning of works
  15.07.1999- completed 11.12.1999
• Contract No. 03/2000, beginning of works
  02.02.2000- completed 30.09.2000
• Contract No. 09/02, beginning of works
  27.06.2002- completed 30.09.2002
• Contract No. 11/02, beginning of works
  10.12.2002- completed 31.03.2003
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 2.      AS Läänemaa Elektrivõrk- Electric Network
  Enterprise
• Contract No. 10/93, beginning of works
  29.10.1993- completed 30.05.1993
• Contract No. 06/96, beginning of works
  03.05.1996- completed 01.10.1996
• Contract No. 07/98, beginning of works
  27.05.1998- completed 30.09.1998
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 3.      AS Tallinna Sadam- Port of Tallinn
• Contract No. 05/96, beginning of works
  01.04.1996- completed 01.11.1996
• Contract No. 61616 01, beginning of works
  26.11.2001- completed 31.12.2002
• Contract No. 240903, beginning of works
  24.09.2003- completed 12.12.2003
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft

7

• 1.      AS Fortum Virumaa-Chemical company
• Contract No. 09/96, beginning of works
  30.07.1996- completed 01.02.1997
• Contract No. 05/01, beginning of works
  01.10.2001- completed 11.11.2001
• Contract No. 05/02, beginning of works
  18.04.2002- completed 30.06.2002
• Software- TELEM-WWW-SCADA software ver. 3 based
  on Windows TCP/IP network
• Hardware- SCADA server
• 2.      AS Tamme Soojus-District heating company
• Contract No. 05/98, beginning of work 02.04.1998-
  completed 01.11.1998
• Software- TELEM-5S-SCADA software ver. 2 based on
  DOS Microstation Power Draft
• Hardware- SCADA server
• 3.      AS Viimsi Elekter- Electric Network
  Enterprise
• Contract No. 08/97, beginning of works
  17.11.1997- completed 01.04.1998
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 4.      AS Eesti Raudtee-Estonian Railway
• Contract No. 13/99, beginning of works
  27.10.1999- completed 15.12.1999
• Contract No. 87-02, beginning of works
  21.02.2002- completed 30.03.2002
• Contract No. 102-02, beginning of works
  27.03.2002- completed 30.11.2002
• Contract No. 106-02, beginning of works
  02.05.2002- completed 31.12.2002

8

• 1.      Viljandi- Regional center
• Contract No. 04/98, beginning of works
  11.03.1998- completed 25.03.1998
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 2.      Võru-Vilja 14, Võru TELEM-2000
• 3.      Saarte Elekter- Regional center
• Contract No. 11/93, beginning of works
  04.11.1993- completed 01.03.1994
• Contract No. 07/97, beginning of works
  29.09.1997- completed 01.02.1998
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• Hardware- SCADA server
• 4.      Hiiumaa- Regional center
• Contract No. 08/95, beginning of works September
  1995- completed 01.02.1996
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
• 5.      Jõhvi- Regional center
• Contract No. 02/97, beginning of works
  23.03.1997- completed 01.12.1997
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft

9
Outside of Estonia

• 1.      Latvenergo ZET- Latvian North Electrical
  Networks, Latvia
• Contract No. 03/99, beginning of works
  05.02.1999- completed 22.06.1999
• Software- TELEM-WWW-SCADA software ver. 3 based
  on Windows TCP/IP network
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
•  
• I/O ponts ca 4000
•  
• 2.      Latvenergo Valmiera and Rujienas ERT-
  Regional centers, Latvia
• Contract No. 06/02, beginning of works
  17.05.2002- completed 30.06.2002
• Contract No. 03/03, beginning of works
  12.05.2003- completed 30.06.2003
• Software- TELEM-WWW-SCADA software ver. 3 based
  on Windows TCP/IP network
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
• I/O points ca 2000
•  
• 3.      Latvenergo Cesu ERT- Regional center,
  Latvia

10

• 1.      Lithuanian Power, iauliai Electricity
  Network, Lithuania
• Contract No. 10/94, beginning of works
  16.12.1994- completed 28.02.1994
• Contract No. 11/96, beginning of works
  09.12.1996- completed 31.01.1997
• Contract No. 06/99, beginning of works
  31.05.1999- completed 30.09.1999
• Contract No. 05/2000, beginning of works
  12.12.2000- completed 30.12. 2000
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
• I/O points ca 400
•  
• 2.      Lithuanian Power, Klaipeda ENE, Regional
  center, Lithuania
• Contract No. 10/02, beginning of works
  19.11.2002- completed 31.12. 2002
• Contract No. 05/03, beginning of works
  17.06.2003- completed 05.09. 2003
• Software- TELEM-5-SCADA software ver. 2 based on
  DOS MicroStation PowerDraft
• TELEM-2000- Data concentrator of SCADA
  communication lines
• Hardware- SCADA server
• SCADA concentrator TELEM-2000
•   

11
MARTEM AS

• SCADA system includes
• SCADA software
• Network PC workstations and servers
• Leased-line, radio,GSM and optical modems
• Remote terminal units (RTU)
• Transducers
• GPS time synchronization modules
• Various interfacing products

12
MARTEM AS
13
MARTEM AS

• Key features of TELEM software are
• Ease of adding new workstation clients
• Remote access over TCP/IP
• Dial up access
• Configurable by users
• Expandable by users
• Modern graphical interface
• Open database access
• Native language interface

14
MARTEM AS

• Software includes
• Graphical schemas
• Line coloring
• Measurement trends and tables
• Event recording
• Alarm handling
• History
• Database queries
• Data export
• User group management
• Security management

15
(No Transcript)
16
(No Transcript)
17
MARTEM AS

• TELEM RTU modules
• Based on 16-bit DSP
• Interface to other equipment via isolated RS-232,
  RS-422 or RS-485 hardware interfaces
• IEC60870-5-101 communication protocol
• Communication speed up to 38Kbit/s
• Time synchronization input for GPS receiver

18
Configuration parameters for modules
19
Configuration parameters for modules

• Contr. addr.
• ASDU(application service data unit) addr.-logical
  datablock address inside equipment
• Object base address
• Common port contr.
• Type of per meas.
• Ref.v. correction

20
TELEM-AI12

• The TELEM family RTU module TELEM-AI12 has 12
  differential analogue inputs.
• Module bases on 16-bit DSP.
• Module can be an independent RTU or can be
  interfaced to SCS (substation control system)
  system.
• It interfaces to other equipment via RS-232,
  RS-422 or RS-485 hardware interfaces.
• TELEM-AI12 communicates with IEC60870-5-101
  protocol, which is international
  telecommunication standard for SCADA systems.
• Module has time synchronization input for GPS
  receiver.
•  

21
TELEM-AI12

• Features
• GPS time tagged measurements for quick
  changes (min, max value)
• Offline mode operation with GSM, data GSM
  communication request by RTS signal
• Periodically saved measurements, buffer size
  for each input is up to 126 measurements
• Configuration / parameterization with IEC
  protocol at the same line with data communication
• User configurable input ranges for every
  input /-5mA, /-10mA, /-20mA, 420mA, 16 bits
  A/D resolution.

22
Configuration parameters for analog inputs
TELEM-AI12 modules
23
Configuration parameters for analog inputs
24
Configuration parameters for analog inputs

• RTU Module is configurable by Telem-2000 software
  or other configuration software, which has
  IEC60870-5-101 protocol.
• Configuration parameters are altered using
  IEC60870-5-101 protocol parameter setting
  commands.
• Parameter setting commands specification for this
  module is available on request.
• Telem-2000 RTU configuration software runs under
  the Windows -98, -2000,-XP and NT4.0 operating
  systems on any standard PC, communicates via its
  COM interface and performs the following
  principal functions
• Configuration / parameterization of telecontrol
  substations
•       Back up of RTU configuration data
•         Diagnostics and supervision in real
  time simultaneously with data acquisition.

25
Communication

•  
• 1.       Asynchronous 20038400 bps, data bits
  8, parity N, stop bits 1
• 2.       Communication protocol IEC60870-5-101
  unbalanced mode, slave
• 3.      Address lengths Link- 1 byte, ASDU- 2
  bytes, object- 2 bytes, time object address
  is 64511
• 4.     GPS input 9600 bps (RS422/485 RX),
  protocol ASCII (Motorola), device
  
  TLM-GPSTime
• 5.       Selectable communication interface
  RS-232, RS-422 or RS-485
• 6.       Communication interface is optically
  isolated to 2,5kV RMS

26
TELEM-DI24

•  
• The TELEM family RTU module TELEM-DI24 has 24
  inputs, which can be configured to digital inputs
  or counter inputs.
• Module bases on 16-bit DSP.
• Module can be an independent RTU or can be
  interfaced to SCS system.
• It interfaces to other equipment via RS-232,
  RS-422 or RS-485 hardware interfaces.
• TELEM-DI24 communicates with IEC60870-5-101
  protocol, which is international
  telecommunication standard for SCADA systems.
• Module has time synchronization input for GPS
  receiver.
•  

27
TELEM-DI24

• Features
• GPS time synchronization with 1 ms accuracy
• 2 level input filters
• Buffer depth for each time tagged input 40
• Logical operations with inputs
• Offline mode operation, data GSM communication
  request by RTS signal
• Configuration / parameterization with IEC
  protocol at the same line with data communication

28
Configuration parameters for digital inputs
TELEM-DI24 modules
29
Digital input processing

• Debouncing filter eliminates the possible
  incorrect information related to contact bouncing
  of mechanical relays
•  
• Tolerant phase A period of time during which
  contact bounce is acceptable. Having a tolerant
  period allows you to monitor and time-stamp the
  initial state of change, while ignoring any
  subsequent contact bounce.
• Intolerant phase A period of time following the
  tolerant phase during which contact bounce is not
  acceptable. It ensures that contact bounce is
  not mistaken for a valid change of state

30
Debouncing filter

• Tolerant phase
• Intolerant phase

31
Chatter filter

• Chatter filter blocks the input (turns it OFF)
  if the input signal starts vibrating. This
  situation may be caused by failed mechanical
  relays which start vibrating.
• Chatter times (changes ) The maximum allowable
  number of state transitions that can occur within
  a filter period. If the number of state
  transitions during a filter period equals or
  exceeds the maximum allowable number of state
  transitions, chatter filter will turn ON, and any
  further transitions will be ignored for the
  duration of the lock-out period.
• Lock-out period The minimum number of filter
  base periods during witch the chatter filter will
  remain ON. The chatter filter can proceed from ON
  to OFF only if no state transitions are detected
  for an entire lock-out period.

32
Chatter filter

• Example Chatter times (changes ) 5, Lock-out
  period 1

33
Logical operations with digital inputs
34
Logical operations with digital inputs

• It is possible to configure the formulas where
  inputs are combined with NOT, AND, OR and XOR
  operations.
• In case of using formulas every formula occupies
  one IEC protocol object address of inputs
  (substitutes the input).
• By default the IEC objects and inputs are bound
  with following formulas
• Y1X1
• Y2X2
• .Y24X24
• Where X is input and Y is the calculated value

35
TELEM-DO8

• The TELEM family RTU module TELEM-DO8 has relay
  outputs for controlling 8 objects
• It has 8 output relays for On and 8 output
  relays for Off operation
• Module bases on 16-bit DSP
• Module can be an independent RTU or can be
  interfaced to SCS system
• It interfaces to other equipment via RS-232,
  RS-422 or RS-485 hardware interfaces
• TELEM-DO8 communicates with IEC60870-5-101
  protocol, which is international
  telecommunication standard for SCADA systems.
• Pulse length 20ms 1min
• with 1 ms. accuracy, pulse series 1256
  pulses

36
Configuration parameters for digital outputs
37
Communication

•  
• 1.       Asynchronous 20038400 bps, data bits
  8, parity N, stop bits 1
• 2.       Communication protocol IEC60870-5-101
  unbalanced mode, slave
• 3.       Address lengths Link- 1 byte, ASDU-
  2 byte, object- 2 byte
• 4.       GPS input 9600 bps (RS422/485 RX),
  protocol ASCII (Motorola), device TLM-GPSTime
• 5.       Selectable communication interface
  RS-232, RS-422 or RS-485
• 6.       Communication interface is optically
  isolated to 2,5kV RMS