Homework:%20CMOS%20Fabrication - PowerPoint PPT Presentation

About This Presentation
Title:

Homework:%20CMOS%20Fabrication

Description:

Ans: Acceleration potential determines depth of implantation;beam current and ... 2.4 What is the reason for using a field implant and why is it often not needed ... – PowerPoint PPT presentation

Number of Views:33
Avg rating:3.0/5.0
Slides: 11
Provided by: abbyilumok
Category:

less

Transcript and Presenter's Notes

Title: Homework:%20CMOS%20Fabrication


1
  • Homework CMOS Fabrication
  • Digital IC Design Martin Page 62
  • 2.1 Discuss briefly the relationships between an
    ion beams acceleration potential, the beam
    current, and the time of implantation on the
    resulting doping profile.
  • Ans Acceleration potential determines depth of
    implantationbeam current and exposure time
    determine dosage
  • 2.2 Place the following processing steps in their
    correct order metal deposition and patterning,
    field implantation, junction implantation, well
    implantation, polysilicon deposition and
    patterning, field-oxide growth.
  • Ans well implantation, field implantation,
    field-oxide growth, polysilicon deposition and
    patterning, junction implantation, metal
    deposition and patterning
  • 2.3 What are major problems associated with a
    single threshold-voltage-adjust implant?
  • Ans NWELL and psubstrate generally have
    different doping levels, may be difficult to
    achieve required threshold voltages by a single
    adjustment step for optimal well doping adjust
    thresholds separately

2
Homework CMOS FabricationDigital IC Design
Martin Page 62
  • 2.4 What is the reason for using a field implant
    and why is it often not needed in the well
    regions?
  • Ans Implant guarantees that Si under FOX will
    never invert when large voltages are in vicinity
    better device isolation
  • 2.5 What are the major trade-offs in using a wet
    process or a dry process when growing thermal
    SiO2?
  • Ans Wet process faster since water vapor
    diffuses in Si faster than oxygen gas but lower
    quality porous oxide results. Dry process gives
    higher density oxide
  • 2.6 Why is polysilicon used to realize gates of
    MOS transistors rather than metal?
  • Ans Poly gates (as opposed to metal) permit a
    self-aligned process, eliminating need for
    another mask.Poly mask defines transistor
    channel area
  • 2.7 Why can a microcircuit not be annealed after
    metal has been deposited?
  • AnsAnnealing is a high temp process, metal
    distribution may be adversely affected

3
(No Transcript)
4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
(No Transcript)
8
(No Transcript)
9
Double Click on Image to see a clearer picture
10
Double Click on Image to see a clearer picture
Write a Comment
User Comments (0)
About PowerShow.com