Providing Innovative Thermal Management Solutions - PowerPoint PPT Presentation

1 / 14
About This Presentation
Title:

Providing Innovative Thermal Management Solutions

Description:

Compact, device specific packaging 'Back End' Heat rejection. High COP, compact and lightweight. Integrated with Front End. Two Phase Spray Cooling ... – PowerPoint PPT presentation

Number of Views:69
Avg rating:3.0/5.0
Slides: 15
Provided by: danr70
Category:

less

Transcript and Presenter's Notes

Title: Providing Innovative Thermal Management Solutions


1
Providing Innovative ThermalManagement Solutions
  • Advanced Liquid Cooling Workshop
  • May 13, 2003
  • Daniel P. Rini, Ph.D.
  • President

2
Outline
  • RTI history status
  • Company Focus
  • Spray Cooling
  • RTI approach
  • High power lasers
  • RTI Prototypes
  • Micro Climate Cooling

3
RTI History Status
  • Founded by Dan Rini in the spring of 2000
  • SBIR contract in June 00, 1 employee
  • Ten employees, plus five UCF grad students and
    four advisors
  • RD efforts with MDA, ASMDC, AFRL, DARPA, all the
    major military laser manufacturers
  • Delivering spray cooling prototypes to laser
    manufacturers
  • Seven patents pending

4
Company Focus
  • Near term Development of advanced cooling
    solutions for military solid-state lasers
  • Long term A product line of cooling solutions
    for lasers other thermal management limited
    technologies

5
Evaporative Spray Cooling
High Heat Flux Cooling h 500,000 W/m2K q
1000 W/cm2 1 cc/s water or other coolant
Ultra Fine Spray Vapor Nozzle DP 6 psi to 10
psi
6
Spray Cooling Applications
High Energy Lasers
Power Electronics
7
Laser Cooling
  • DoD High Energy Lasers
  • Illuminators and weapons
  • Three main parts
  • Laser, Power, Cooling

8
RTI ESC Goals and Approach
  • Complete solution from device cooling to heat
    rejection
  • Reduced system weight, size and electrical
    consumption
  • Front End
  • ESC heat exchanger
  • Nozzle array
  • Compact, device specific packaging
  • Back End
  • Heat rejection
  • High COP, compact and lightweight
  • Integrated with Front End

9
Two Phase Spray Cooling
  • 1 cc/cm2
  • (10 to 40x less)
  • mass, volume, power savings
  • DP10 psi (1.5 to 5x less)
  • Low thermal resistance

Diode Lasers
Nozzle Array
10
RTI Prototypes
  • Large Area Prototypes
  • Current 21 cm2
  • 126 cm2 by September 03
  • High Heat Flux
  • R-134a, 200 W/cm2 _at_ 20 C
  • NH3, 500 W/cm2 _at_ 20 C
  • H20, 1000 W/cm2 _at_ 125 C
  • Cycles
  • Closed cycle refrigerated
  • 1/2 - 1/3 weight and vol. of standard chillers
  • Closed cycle non-refrigerated
  • Open cycle, vent vapor to ambient 1/10 weight

11
Soldier Cooling
  • Army Natick Soldier Center
  • 200 W of cooling
  • Exterior cooling unit interfaces via liquid suit
  • Very small, very light, very low energy
    consumption

12
Microclimate Cooling System
  • 200 Wc cooling
  • 95 F (35 C) air
  • 65 We electrical power
  • 2 kg total weight
  • Pump, 8-12 GPH, 8 psi
  • 25 C water temp
  • 1500 ml cooling system volume

13
Microclimate Cooling System
Compressor
Condenser
Commercial off the shelf items
6 cm
Prototype Development
Missile
Army
Car- A/C
Fire Man
Computer
14
  • For information on additional technologies and
    programs please contact
  • Daniel P. Rini
  • (407) 384-7840
  • Dan_at_RiniTech.com
Write a Comment
User Comments (0)
About PowerShow.com