A VIRTUAL TOUR

1
A VIRTUAL TOUR
DYNAMIC TESTING EQUIPMENT

• CUSTOM TESTING SOLUTIONS
• 360 LAVOY RD. ERIE, MI. 48133
• PHONE [phone] FAX [phone]
• www.dynamic-testing.com

2
Dynamic Testing Overview

• Standard Products
• Fatigue-rated actuators
• Electrical controls
• Single channel
• Multi-channel
• Hydraulics
• HCMS
• Hydraulic power supplies
• Accessories
• Custom System Solutions

• Markets Served
• Elastomer testing
• Automotive suspension testing
• Automotive powertrain testing
• In-line production testing
• Hose testing
• Aerospace testing
• Literature and Products

3
Fatigue Rated Actuators Overview

• Linear actuators
• Standard actuators
• Force rating (kip) 1.1 3.3 5.5 11.0
  25 35 55 110
• 4-inch, 6-inch and 10-inch strokes
• Hydrostatic bearing actuators
• Force rating (kip) 3.3 6.3 11 22
• 4-inch, 6-inch and 10-inch strokes
• Rotary actuators
• Low and high frequency rotaries
• Low and high frequency spinning actuators

4
Linear Fatigue Rated Actuators
3.3 KIP 18-INCH STROKE ACTUATOR FOR VIBRATION
TESTING OF AUTOMOTIVE SEATS
5 KIP 6-INCH STROKE ACTUATORS BALL JOINTS FOR
AUTOMOTIVE SUSPENSION TESTING
5
Linear Fatigue Rated Actuators
380 KIP ACTUATOR FOR OFF-ROAD VEHICLE TESTING
HIGH FREQUENCY ACTUATOR FOR CRACK PROPAGATION
TESTING
6
Hydrostatic Bearing Actuators
11 KIP (50KN) ACTUATOR/ 40 GPM HCM
4-POST ROAD SIMULATOR
6.3 KIP ACTUATORS FOR END OF LINE 4-POST ROAD
SIMULATOR
22 KIP ACTUATOR FOR REAL-TIME SHOCK ABSORBER
TESTING
7
Low and High Frequency Rotarys
120K In-lb ROTARY ACTUATOR FOR DRIVELINE TESTING
HIGH FREQUENCY ACTUATOR FOR VIBRATION RESONANCE
TESTING
8
Spinning Rotarys for Four-Square Applications

• 0-20,000 RPM
• 0-150,000 NM TORQUE
• INLINE MOUNT
• HYDROSTATIC BEARINGS
• AXIAL LOAD CAPABILITY (DUE TO HYDROSTATIC
  BEARINGS)

9
Single Channel Controller
DTE 3500 Servohydraulic Controller

• Specifications
• Up to four channels of closed loop control with
  graphical monitoring capability.
• Interface connectors directly compatible with
  most standard servo components
• Programmable functions for a variety of
  applications including block cycle and
  conditional interrupts
• Signal over time and signal versus signal
  graphing
• Emergency Stop Button
• Adjustable, programmable parameters (software
  selectable)
• Programmable BNC Connectors for monitoring of
  analog signals
• Data acquisition for all monitored channels and
  signals with standard Comma Separated Variable
  (.csv) format
• Three Hydraulic Pressure Control Indicator LEDs
  (Off, Low, High), for hydraulic service manifolds
• Built-in I/O to control hydraulic power units
• Includes a PC for test operation and monitoring

Data Acquisition
DTE1000
10
Multi-Channel Controllers

• UP TO 16-CHANNEL CONTROLLERS
• BLOCK CYCLE CAPABILITY
• ABILITY TO PLAY BACK RPC III OR OTF FILES
• OPTIONAL ITERATION PACKAGES
• LAB-AUTOMATION PACKAGES AVAILABLE

11
Hydraulic Control Manifolds

• ECONOMICAL
• PROPORTIONAL-SOFT START
• OPTIONAL ACCUMULATOR SIZES
• STANDARD WIRING
• LOW PRESSURE DROP
• POSITVE SHUTOFF USING NO-LEAK DESIGN POPPET
  VALVES.

80 GPM CONTROL MANIFOLD
220 GPM CONTROL MANIFOLD
12
Whisper HPS Systems

• NOISE LEVELS EQUIVALENT TO ANY IN THE INDUSTRY
• O-RING FACE SEAL FITTINGS FOR O-LEAK DESIGN
• PRESSURE COMPENSATED PUMPS
• 3 MICRON FILTRATION
• ECONOMICAL TO INSTALL AND USE

13
Accessories

• BALL JOINTS
• SWIVELS
• SPIRAL LOCK WASHERS
• CALIBRATION
• SERVICE
• CONSULTING

BALL JOINTS 3 KIP TO 110 KIP
GIMBAL MOUNTS
SWIVEL BASE
SPIRAL LOCK WASHERS LOAD CELL
14
Elastomer Testing Equipment

• PRODUCTION AND R D TESTING
• LOW AND HIGH FREQUENCY

BOLSTER TEST STAND FOR 100 PRODUCTION QC
TESTING
BALL JOINT BOOT TEST STAND
AEROSPACE SEAL TEST STAND
15
Automotive Truck and Off-Road Suspension Testing
TIE ROD END BACKLASH MACHINE
BALL JOINT TEST MACHINE
REAL TIME AXLE TEST RIG
16
Powertrain Test Stands
TIMMING CHAIN TEST STAND
C-V JOINT FUNCTIONAL TEST STAND
ULTIMATE ROTATING TORQUE TEST
U-JOINT SEAL TEST STAND
17
Hose Testing
BRAKE HOSE TEST STAND WITH JOUNCE REBOUND,
STEERING PRESSURE
GAS TANK VALVE TEST STAND
18
Power Steering Pump Test Stand

• FLEXIBLE STEP EDITOR FOR TEST CREATION
• ON-LINE FFT WITH ORDER TRACKING ON 4 CHANNELS
• 60 TO 300 DEG. F ENVIRONMENT
• NOISE LEVEL MEASUREMENTS
• 0-10,000 RPM PUMP SPEED
• DATA ACQUISITION ON 14 CHANNELS
• FOUR CONTROL CHANNELS