SUNMAX ENERGY SYSTEMSS PRIVATE LIMITED

1

• SUNMAX ENERGY SYSTEMSS PRIVATE LIMITED

2
SOLAR POWER PANEL
3
Solar Power working principle

• The solar power system consists of a solar
  module, which converts the sunlight in to
• electricity and a low maintenance ,VRLA battery
• for storing electricity .The charging of the
  battery
• is done through a highly sophisticated and
• efficient solar charger controller which is built
  to
• the inverter.AC appliances with the rated power
• inverter can be connected to the outlet of the
• inverter. (230 v 50 hz)The inverter uses the most
  
• advance technology and provides a clean sine
• wave output.

4
Solar Power -Advantages

• Solar power systems can be employed for any
  application where the requirement is for clean,
  reliable and uninterrupted power. Solar power
  systems are convenient and safe compared diesel
  generators due to its outstanding advantages such
  as quite and un-attented operation and very low
  maintenance.

5
Solar power Main Parts

• Normally, the building integrated solar system
  includes the following main parts
• Solar assembled battery-with quick plug
  socket, which can be installed or connected
  quickly
• Installation bracket-suitable for different
  positions, directions and installation angles on
  the building
• Assembled connection cables, DC connection box
  etc.
• DC-to-AC converter-match the solar power
  generation equipment
• DC side hardware-cables, DC cut-off switches
  etc
• AC side hardware-connection cables, protection
  devices and electric instruments etc between the
  commercial power and the DC-to-AC converter
• Possibly includes system monitor, display, and
  data storage etc equipment

6
Solar Powered Building
7
Solar PV Module
8
Solar Power Systems
9
Technical specification of solar cell.

• Specification    Material Single Crystalline
  Silicon
• Size 125 mm x 125 mm (Pseudo Square)
• Surface Textured
• Thickness 240 30 Microns
• Isc 4.5 Amp
• Voc 600 m
• V Im 4.0 Amp
• Vm 480 mV
• Pm 1.92 Watts
• Fill Factor 70.0   
• There will be 8-10 increase in power after
  lamination using high transmission iron free
  glass and EVA (Ethylene Vinyl Acetate).
• STC Standard Test Condition
• Solar IrradiationAM 1.5
• Intensity100 milli Watt/cm 2
• Cell Temperature 25 0 C
• ( Within the Measurement Tolerance of 5)

10
Solar Module - Specification.

• Electrical Parameters PM 160
• Maximum Power Rating Pmax. (Wp) 160.0
• Minimum Power Rating Pmin (Wp) 152.0
• Rated Current IMPP (A) 4.6
• Rated Voltage VMPP (V) 35.0
• Short Circuit Current Isc (A) 5.0
• Open Circuit Voltage Voc (V) 43.0
• No. of Cells (Nos) 72
• Physical Dimension (mm) (L x W x T) 1580 x 795 x
  42
• Weight (Kg) 14

11
Solar Module - Specification

• NOCT (C) 45 2
• Maximum permitted module temperature (C) -40 to
  85
• Maximum permissible system voltage (C) 600
• Relative Humidity at 85C (C) 85
• Under Standard Test Conditions (STC)
• Air Mass AM 1.5
• Irradiance 1000 W/m2
• Cell Temperature 25C
• Nominal Operating Cell Temperature (NOCT) at
• Wind Speed 1m/s
• Irradiance 800 W/m2
• Ambient Temperature 20C

12
Solar Module specification.

• SOLAR PHOTOVOLTAIC MODULES PM160
• Solar Photovoltaic Modules, type PM180 are
  manufactured using Mono Crystalline Silicon Solar
  Cells. These are high quality and high
• performance modules suitable for power
  generation. These modules have excellent
  durability to withstand extreme temperature and
• weather conditions of the high altitudes, deserts
  and coastal regions.
• FEATURES
• ?? Uses mono crystalline silicon Solar Cells.
• ?? Suitable for DC 12V/24V systems or multiple
  there-of.
• ?? Encapsulation of cells using UV stabilized
  polymer (EVA) and protective back cover using
  Tedler-Polyester-Tedlar.
• ?? High transmission toughened glass superstrate
  and anodized aluminum frame for mounting.
• ?? Long service Life.

13
Building Integrated Photo voltaics
14

• BIPV can replace conventional glazing on Atria,
  Facade, Wall, Awnings, Pergola, Roof, Skylights,
  Parapet Cladding
• BIPV adds tremendous aesthetic value. Besides
  giving a very distinctive appearance to a
  building, BIPV provides attractive combinations
  when used with conventional building material
• BIPV is sustainable building material. It
  generates clean electricity, which can meet part
  of the buildings energy requirements

15

• It is sturdy, leak-proof and all-weather proof,
  with the ability to withstand high wind, hail,
  humidity and high ambient temperature
• BIPV from Sunmax Solar is a result of proven
  technology it needs no fuel, has no moving parts
  and needs negligible maintenance
• It is flexible, modular and available in a
  variety of single, double and triple glass
  laminates. The triple glass laminates provide
  excellent thermal and acoustic insulation
• BIPV can be customized

16
Solar street light

• Solar street lighting system is an ideal lighting
  system for the illumination of streets, squares
  and cross road located in areas that not
  connected to the power grid. This fully
  integrated system combines the latest and most
  innovative technologies available, providing
  years of convenient and trouble free lighting
  .Fully assembled and factory tested kits are
  available. Sunmax solar has a wide range of solar
  street lights, for different lighting
  requirements. Sunmax 36 W is the stand alone
  solar street lighting System of sunmax solar
  ,comprises of one solar streetlight Luminary
  (SSL) using compact Fluorescent Lamp (CF Lamp )
  of 36 W as light source, Re-Chargeable lead acid
  battery for storage, PV modules for charging the
  battery, suitable electronics for the operation
  of the lamp and safe charging and discharging of
  the battery and mechanical hardware for fixing
  these sub systems.Sunmax 36 W is available in
  Economy model.

17
Technical Specification of solar street light

• 36 watts
• General
• Application Solar powered lighting
• Duty Cycle 12 hrs ( DTDC )
• Numbers of days autonomy 4 Days
• System Voltage 24 V DC
• Solar PV Module
• Module Type Mono /Poly Crystalline silcon
• Module Power 150 Wp ( 75 Wp x 2 nos )
• Battery
• Type Flooded Lead Acid (Tubular )
• Battery Capacity
• (_at_ C/10 for tubular 100 Ah (Tubular )x 2 nos
• Charge controller Type Rating series pulsed
  two step10 A max.

18
Technical specification of solar street light.

• Solar Lighting Controller
• Solar Street Light Luminary
• Number of Luminaries one
• Lamp Type Compact Fluorescent Lamp(CFL)
• 4 Pin , single U
• Rated Lamp wattage 36 W ( 2900 _ 5 Lumens )
• Battery Enclosure
• Fixing Floor Mounting
• Size(LXWXH) 1100X975X600 mm
• MaterialsFinishing MScoldRolledsheet Powder
  Coated
• Module Mounting structure
• Mounting Type,Materials
• Finishing PoleMountMildsteel,HotDip
  Galvanized
• Cable Assembly
• Module to Lighting controller 2.5 sq mm cable
  with ring terminal
• Luminary to lighting controller 1.5 sq mm Dual
  sheathed cable
• Battery to Lighting Controller 2.5 sq mm cable
  ring and fork terminal
• Battery to Lighting Controller 0.5 sq mm cable
  with ring and fork
• Sensing terminal.

19
Solar street lights
20
Solar street lights
21
36 WATTS
22
18 WATTS
23
11 WATTS